@ -0,0 +1,114 @@ | |||
/* | |||
Copyright 2022 ryanbaekr | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x7262 | |||
#define PRODUCT_ID 0x0018 | |||
#define DEVICE_VER 0x0003 | |||
#define MANUFACTURER ryanbaekr | |||
#define PRODUCT rb18 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 4 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B1, F7, F6, F5, F4 } | |||
#define MATRIX_COL_PINS { B2, B6, B5, B4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 10 | |||
/* Underglow options */ | |||
#define RGB_DI_PIN B0 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLIGHT_EFFECT_BREATHING | |||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
#define RGBLIGHT_EFFECT_SNAKE | |||
#define RGBLIGHT_EFFECT_KNIGHT | |||
#define RGBLIGHT_EFFECT_CHRISTMAS | |||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
#define RGBLIGHT_EFFECT_RGB_TEST | |||
#define RGBLIGHT_EFFECT_ALTERNATING | |||
#define RGBLIGHT_EFFECT_TWINKLE | |||
#define RGBLED_NUM 3 | |||
#define RGBLED_HUE_STEP 8 | |||
#define RGBLED_SAT_STEP 8 | |||
#define RGBLED_VAL_STEP 8 | |||
#endif | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO |
@ -0,0 +1,10 @@ | |||
{ | |||
"keyboard_name": "rb18", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"layouts": { | |||
"LAYOUT_numpad_5x4": { | |||
"layout": [{"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":0, "y":2.25}, {"x":1, "y":2.25}, {"x":2, "y":2.25}, {"x":3, "y":2.25, "h":2}, {"x":0, "y":3.25}, {"x":1, "y":3.25}, {"x":2, "y":3.25}, {"x":0, "y":4.25}, {"x":1, "y":4.25}, {"x":2, "y":4.25}, {"x":3, "y":4.25, "h":2}, {"x":0, "y":5.25, "w":2}, {"x":2, "y":5.25}] | |||
} | |||
} | |||
} |
@ -0,0 +1,26 @@ | |||
/* Copyright 2022 ryanbaekr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_numpad_5x4( | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, | |||
KC_P0, KC_PDOT, KC_PENT | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for rb18 |
@ -0,0 +1,50 @@ | |||
/* Copyright 2022 ryanbaekr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_numpad_5x4( | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, | |||
KC_P0, KC_PDOT, KC_PENT | |||
), | |||
[1] = LAYOUT_numpad_5x4( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, | |||
_______, _______, _______ | |||
), | |||
[2] = LAYOUT_numpad_5x4( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, | |||
_______, _______, _______ | |||
), | |||
[3] = LAYOUT_numpad_5x4( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, | |||
_______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
LTO_ENABLE = yes |
@ -0,0 +1,17 @@ | |||
/* Copyright 2022 ryanbaekr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rb18.h" |
@ -0,0 +1,35 @@ | |||
/* Copyright 2022 ryanbaekr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define ___ KC_NO | |||
#define LAYOUT_numpad_5x4( \ | |||
k00, k11, k02, k03, \ | |||
k10, k21, k12, \ | |||
k20, k31, k22, k13, \ | |||
k30, k41, k32, \ | |||
k40, k42, k33 \ | |||
){ \ | |||
{ k00, ___, k02, k03 }, \ | |||
{ k10, k11, k12, k13 }, \ | |||
{ k20, k21, k22, ___ }, \ | |||
{ k30, k31, k32, k33 }, \ | |||
{ k40, k41, k42, ___ } \ | |||
} |
@ -0,0 +1,15 @@ | |||
# rb18 | |||
A diy stacked acrylic numpad. | |||
* Keyboard Maintainer: [ryanbaekr](https://github.com/ryanbaekr) | |||
* Hardware Supported: rb18 with Elite-C | |||
* Hardware Availability: 2022/04/18 | |||
Make example for this keyboard (after setting up your build environment): | |||
make ryanbaekr/rb18:default | |||
To boot into the bootloader, hold the reset button on the Elite-C on plug in | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,18 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output |