Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency

docs/feature_swap_hands.md

@@ -1,6 +1,6 @@
 # Swap-Hands Action
 
-The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `ONEHAND_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
+The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `SWAP_HANDS_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
 
 ## Configuration
 

keyboards/ergo42/ergo42.c

@@ -1,6 +1,6 @@
 #include "ergo42.h"
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/ergodone/rules.mk

@@ -5,7 +5,7 @@
 #
 # make clean = Clean out built project files.
 #
-# That's pretty much all you need. To compile, always go make clean, 
+# That's pretty much all you need. To compile, always go make clean,
 # followed by make.
 #
 # For advanced users only:
@@ -88,7 +88,7 @@ FADING_LED_ENABLE       = no  # Enable fading backlight
 BREATHING_LED_ENABLE    = no  # Enable breathing backlight
 LEDMAP_ENABLE           = no	# Enable LED mapping
 LEDMAP_IN_EEPROM_ENABLE = no  # Read LED mapping from eeprom
-ONEHAND_ENABLE          = no  # Disable Onehand
+SWAP_HANDS_ENABLE       = no  # Disable Onehand
 RGBLIGHT_ENABLE         = no
 MIDI_ENABLE             = no
 

keyboards/ergodox_ez/ergodox_ez.c

@@ -100,7 +100,7 @@ void ergodox_blink_all_leds(void)
       mcp23018_status = ergodox_left_leds_update();
     }
 #endif
-    
+
     //ergodox_led_all_on();
     //_delay_ms(333);
     ergodox_led_all_off();
@@ -185,7 +185,7 @@ uint8_t ergodox_left_leds_update(void) {
 #endif
 
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/ergodox_ez/keymaps/bepo_tm_style/rules.mk

@@ -2,7 +2,7 @@ MOUSEKEY_ENABLE  = yes # Mouse keys
 EXTRAKEY_ENABLE  = yes # Audio control and System control
 COMMAND_ENABLE   = yes # Commands for debug and configuration
 NKRO_ENABLE      = yes # USB Nkey Rollover - for issues, see github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
 KEY_LOCK_ENABLE  = yes # Enable the KC_LOCK key
 TAP_DANCE_ENABLE = yes # Enable the tap dance feature.
 CONSOLE_ENABLE   = yes  # Console for debug

keyboards/ergodox_ez/rules.mk

@@ -5,7 +5,7 @@
 #
 # make clean = Clean out built project files.
 #
-# That's pretty much all you need. To compile, always go make clean, 
+# That's pretty much all you need. To compile, always go make clean,
 # followed by make.
 #
 # For advanced users only:
@@ -56,7 +56,7 @@ F_USB = $(F_CPU)
 
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
+#     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = halfkay
 
@@ -79,9 +79,9 @@ COMMAND_ENABLE   = yes # Commands for debug and configuration
 CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
 NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 UNICODE_ENABLE   = yes # Unicode
-ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
 SLEEP_LED_ENABLE = no
 API_SYSEX_ENABLE = no
 RGBLIGHT_ENABLE = yes
 
-LAYOUTS = ergodox
+LAYOUTS = ergodox

keyboards/ergodox_infinity/ergodox_infinity.c

@@ -174,7 +174,7 @@ __attribute__ ((weak))
 void ergodox_right_led_3_set(uint8_t n) {
 }
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
     {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}},

keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk

@@ -67,7 +67,7 @@ CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
 NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 UNICODE_ENABLE   = yes # Unicode
-ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
 STENO_ENABLE = yes  #enable plover steno mode
 CUSTOM_MATRIX = yes # Custom matrix file
 SERIAL_LINK_ENABLE = yes

keyboards/ergodox_infinity/rules.mk

@@ -67,7 +67,7 @@ CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
 NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 UNICODE_ENABLE   = yes # Unicode
-ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
 
 CUSTOM_MATRIX = yes # Custom matrix file
 SERIAL_LINK_ENABLE = yes
@@ -79,11 +79,11 @@ MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
 LCD_DRIVER = st7565
-LCD_WIDTH = 128 
+LCD_WIDTH = 128
 LCD_HEIGHT = 32
 
 LED_DRIVER = is31fl3731c
-LED_WIDTH = 7 
+LED_WIDTH = 7
 LED_HEIGHT = 7
 
 LAYOUTS = ergodox

keyboards/hadron/keymaps/default/rules.mk

@@ -1,7 +1,7 @@
 
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -16,7 +16,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/hadron/keymaps/side_numpad/rules.mk

@@ -1,7 +1,7 @@
 
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -16,7 +16,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/handwired/dactyl/dactyl.c

@@ -57,7 +57,7 @@ out:
     return mcp23018_status;
 }
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/handwired/dactyl/rules.mk

@@ -80,7 +80,7 @@ COMMAND_ENABLE          = no  # Commands for debug and configuration
 CUSTOM_MATRIX           = yes # Custom matrix file for the Dactyl
 NKRO_ENABLE             = yes # USB Nkey Rollover
 UNICODE_ENABLE          = yes # Unicode
-ONEHAND_ENABLE          = yes # Allow swapping hands of keyboard
+SWAP_HANDS_ENABLE       = yes # Allow swapping hands of keyboard
 SLEEP_LED_ENABLE        = no
 API_SYSEX_ENABLE        = no
 RGBLIGHT_ENABLE         = no

keyboards/helix/rev1/keymaps/OLED_sample/rules.mk

@@ -15,7 +15,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/helix/rev2/keymaps/default/rules.mk

@@ -17,7 +17,7 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 # Helix keyboard : see ./config.h: RGBLED_NUM 6 or 32
 # Helix keyboard : RGBLIGHT_ENABLE = no or yes
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/lets_split/keymaps/OLED_sample/rules.mk

@@ -1,6 +1,6 @@
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -15,7 +15,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/lets_split/keymaps/heartrobotninja/rules.mk

@@ -15,7 +15,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/lets_split/keymaps/mjt/rules.mk

@@ -1,6 +1,6 @@
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -15,7 +15,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no        # Enable one-hand typing
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/lets_split/lets_split.c

@@ -1,6 +1,6 @@
 #include "lets_split.h"
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/levinson/levinson.c

@@ -1,6 +1,6 @@
 #include "levinson.h"
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/mitosis/mitosis.c

@@ -30,7 +30,7 @@ void led_set_kb(uint8_t usb_led) {
 
 }
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
 {{9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

keyboards/niu_mini/niu_mini.c

@@ -1,6 +1,6 @@
 #include "niu_mini.h"
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
   {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

keyboards/planck/keymaps/experimental/rules.mk

@@ -16,7 +16,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-ONEHAND_ENABLE = yes        # Enable one-hand typing
+SWAP_HANDS_ENABLE = yes        # Enable one-hand typing
 STENO_ENABLE = yes					# Enable TX Bolt protocol for Stenography, requires VIRTSER and may not work with mouse keys
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/planck/planck.c

@@ -1,6 +1,6 @@
 #include "planck.h"
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
   {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

keyboards/preonic/preonic.c

@@ -1,6 +1,6 @@
 #include "preonic.h"
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
   {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

tmk_core/common.mk

@@ -25,7 +25,7 @@ TMK_COMMON_SRC +=	$(COMMON_DIR)/host.c \
 
 ifeq ($(PLATFORM),AVR)
 	TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S
-endif 
+endif
 
 ifeq ($(PLATFORM),CHIBIOS)
 	TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c
@@ -124,7 +124,10 @@ ifeq ($(strip $(BLUETOOTH)), RN42)
 endif
 
 ifeq ($(strip $(ONEHAND_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DONEHAND_ENABLE
+  SWAP_HANDS_ENABLE = yes # backwards compatibility
+endif
+ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE
 endif
 
 ifeq ($(strip $(NO_USB_STARTUP_CHECK)), yes)

tmk_core/common/action.c

@@ -64,7 +64,7 @@ void action_exec(keyevent_t event)
     fauxclicky_check();
 #endif
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
     if (!IS_NOEVENT(event)) {
         process_hand_swap(&event);
     }
@@ -91,7 +91,7 @@ void action_exec(keyevent_t event)
 #endif
 }
 
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 bool swap_hands = false;
 
 void process_hand_swap(keyevent_t *event) {
@@ -524,7 +524,7 @@ void process_action(keyrecord_t *record, action_t action)
 #endif
         case ACT_COMMAND:
             break;
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
         case ACT_SWAP_HANDS:
             switch (action.swap.code) {
                 case OP_SH_TOGGLE:

tmk_core/common/action.h

@@ -67,7 +67,7 @@ extern bool disable_action_cache;
 #endif
 
 /* Code for handling one-handed key modifiers. */
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
 extern bool swap_hands;
 extern const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS];
 #if (MATRIX_COLS <= 8)