* Initial 25 port * Initial 25 port - fix info.json and hand_swap_config * Review comments - fix layout macros, copyright comments, and duplicated use of layering macrospull/4411/head
@ -0,0 +1,60 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "25.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#ifdef SWAP_HANDS_ENABLE | |||
__attribute__ ((weak)) | |||
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { | |||
{{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}}, | |||
{{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}}, | |||
{{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}}, | |||
{{4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}}, | |||
{{4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}}, | |||
{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}}, | |||
{{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}}, | |||
{{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}}, | |||
{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}}, | |||
{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}}, | |||
}; | |||
#endif |
@ -0,0 +1,85 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define ___ KC_NO | |||
#ifndef FLIP_HALF | |||
#define LAYOUT_ortho_5x10( \ | |||
L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ | |||
L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ | |||
L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ | |||
L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \ | |||
L40, L41, L42, L43, L44, R40, R41, R42, R43, R44 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04 }, \ | |||
{ L10, L11, L12, L13, L14 }, \ | |||
{ L20, L21, L22, L23, L24 }, \ | |||
{ L30, L31, L32, L33, L34 }, \ | |||
{ L40, L41, L42, L43, L44 }, \ | |||
{ R04, R03, R02, R01, R00 }, \ | |||
{ R14, R13, R12, R11, R10 }, \ | |||
{ R24, R23, R22, R21, R20 }, \ | |||
{ R34, R33, R32, R31, R30 }, \ | |||
{ R44, R43, R42, R41, R40 } \ | |||
} | |||
#else | |||
#define LAYOUT_ortho_5x10( \ | |||
L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ | |||
L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ | |||
L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ | |||
L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \ | |||
L40, L41, L42, L43, L44, R40, R41, R42, R43, R44 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04 }, \ | |||
{ L10, L11, L12, L13, L14 }, \ | |||
{ L20, L21, L22, L23, L24 }, \ | |||
{ L30, L31, L32, L33, L34 }, \ | |||
{ L40, L41, L42, L43, L44 }, \ | |||
{ R00, R01, R02, R03, R04 }, \ | |||
{ R10, R11, R12, R13, R14 }, \ | |||
{ R20, R21, R22, R23, R24 }, \ | |||
{ R30, R31, R32, R33, R34 }, \ | |||
{ R40, R41, R42, R43, R44 } \ | |||
} | |||
#endif | |||
#define LAYOUT_ortho_5x5( \ | |||
L00, L01, L02, L03, L04, \ | |||
L10, L11, L12, L13, L14, \ | |||
L20, L21, L22, L23, L24, \ | |||
L30, L31, L32, L33, L34, \ | |||
L40, L41, L42, L43, L44 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04 }, \ | |||
{ L10, L11, L12, L13, L14 }, \ | |||
{ L20, L21, L22, L23, L24 }, \ | |||
{ L30, L31, L32, L33, L34 }, \ | |||
{ L40, L41, L42, L43, L44 }, \ | |||
{ ___, ___, ___, ___, ___ }, \ | |||
{ ___, ___, ___, ___, ___ }, \ | |||
{ ___, ___, ___, ___, ___ }, \ | |||
{ ___, ___, ___, ___, ___ }, \ | |||
{ ___, ___, ___, ___, ___ } \ | |||
} | |||
#define LAYOUT_macro LAYOUT_ortho_5x5 | |||
#define LAYOUT_split LAYOUT_ortho_5x10 | |||
#ifdef USE_I2C | |||
#error "I2C not Supported" | |||
#endif |
@ -0,0 +1,230 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0A0C | |||
#define DEVICE_VER 0x0F25 | |||
#define MANUFACTURER di0ib | |||
#define PRODUCT The 5x5 Keyboard | |||
#define DESCRIPTION A split 50 key keyboard | |||
#define USE_SERIAL | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
//#define MASTER_RIGHT | |||
//#define EE_HANDS | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 5*2 | |||
#define MATRIX_COLS 5 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
#define DIODE_DIRECTION COL2ROW | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
// #define RGB_DI_PIN E2 | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLIGHT_ANIMATIONS | |||
// #define RGBLED_NUM 16 | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* | |||
* HD44780 LCD Display Configuration | |||
*/ | |||
/* | |||
#define LCD_LINES 2 //< number of visible lines of the display | |||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||
#if LCD_IO_MODE | |||
#define LCD_PORT PORTB //< port for the LCD lines | |||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||
#define LCD_RS_PIN 3 //< pin for RS line | |||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||
#define LCD_RW_PIN 2 //< pin for RW line | |||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||
#define LCD_E_PIN 1 //< pin for Enable line | |||
#endif | |||
*/ |
@ -0,0 +1,29 @@ | |||
{ | |||
"keyboard_name": "foobar", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 6, | |||
"height": 2, | |||
"layouts": { | |||
"LAYOUT_macro": { | |||
"key_count": 15, | |||
"layout": [ | |||
{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, | |||
{"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, | |||
{"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, | |||
{"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, | |||
{"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4} | |||
] | |||
}, | |||
"LAYOUT_split": { | |||
"key_count": 30, | |||
"layout": [ | |||
{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, | |||
{"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, | |||
{"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, | |||
{"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, | |||
{"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,19 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// place overrides here |
@ -0,0 +1,87 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _QWERTY 0 | |||
#define _LOWER 1 | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
LOWER, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Qwerty | |||
* ,---------------------------------------------------------------------. | |||
* | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | |||
* |------+------+------+------+------+------+------+------+------+------| | |||
* | Q | W | E | R | T | Y | U | I | O | P | | |||
* |------+------+------+------+-------------+------+------+------+------| | |||
* | A | S | D | F | G | H | J | K | L | Bksp | | |||
* |------+------+------+------+------|------+------+------+------+------| | |||
* | Z | X | C | V | B | N | M | , | . |Enter | | |||
* |------+------+------+------+------+------+------+------+------+------| | |||
* | Ctrl | GUI | Alt |Lower |Space | Shift| Left | Down | Up |Right | | |||
* `---------------------------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT_split( | |||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ | |||
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ | |||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_BSPC, \ | |||
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_ENT, \ | |||
KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_LSFT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ | |||
), | |||
/* Lower | |||
* ,---------------------------------------------------------------------. | |||
* | F1 | F2 | F3 | F4 | F5 | F6 | ` | / | _ | + | | |||
* |------+------+------+------+------|------+------+------+------+------| | |||
* | F7 | F8 | F9 | F10 | F11 | F12 | ~ | [ | ] | \ | | |||
* |------+------+------+------+-------------+------+------+------+------| | |||
* | Esc | | | | | | | ; | " | Del | | |||
* |------+------+------+------+------|------+------+------+------+------| | |||
* | Tab | | | | | | | | | | | |||
* |------+------+------+------+------+------+------+------+------+------| | |||
* | | | | | | | Home | PgDn | PgUp | End | | |||
* `---------------------------------------------------------------------' | |||
*/ | |||
[_LOWER] = LAYOUT_split( \ | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS, \ | |||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE, \ | |||
KC_ESC, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL, \ | |||
KC_TAB, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ | |||
), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
} |
@ -0,0 +1 @@ | |||
# The default split keymap for 25 |
@ -0,0 +1,19 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// place overrides here |
@ -0,0 +1,42 @@ | |||
/* Copyright 2018 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_macro( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, \ | |||
KC_GRV, KC_Q, KC_W, KC_E, KC_R, \ | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, \ | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC \ | |||
), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
} |
@ -0,0 +1 @@ | |||
# The default macro keymap for 25 |
@ -0,0 +1,18 @@ | |||
# 25 | |||
![25](https://2.bp.blogspot.com/-lBK_ZlB3a9Q/WcAM0B_vwdI/AAAAAAACDgs/qnI9YB53pzck4Bw0v5QRvypDMs80CxWVQCLcBGAs/s640/IMG_0695.JPG) | |||
=== | |||
Split 50 key keyboard - it is the largest keybad that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 25 key macropad. | |||
* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/25) | |||
Keyboard Maintainer: QMK Community | |||
Hardware Supported: 25 PCB | |||
Hardware Availability: [25 project on 40% Keyboards](http://www.40percent.club/2017/09/25.html) | |||
Make example for this keyboard (after setting up your build environment): | |||
make 40percentclub/25:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,85 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = caterina | |||
# If you don't know the bootloader type, then you can specify the | |||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||
# Enable generic behavior for split boards | |||
SPLIT_KEYBOARD = yes | |||
LAYOUTS = ortho_5x5 ortho_5x10 |