* handwired dactyl with 2 pro micros added * dactyl_promicro README updated * dactyl_promicro default layout fixed * requested changes * dactyl_promicro README updated * qmk toolbox link fixed * layout reflects phys. keys positionspull/5170/head
@ -0,0 +1,83 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
Copyright 2015 Jack Humbert | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
#define PRODUCT Dactyl Ergo(6x6) | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 12 | |||||
#define MATRIX_COLS 6 | |||||
// wiring of each half | |||||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } | |||||
#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 } | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x3060 | |||||
#define DEVICE_VER 0x0001 | |||||
//#define MANUFACTURER tshort | |||||
// defined in subfolder | |||||
#define DESCRIPTION A split keyboard | |||||
/* mouse config */ | |||||
#define MOUSEKEY_INTERVAL 20 | |||||
#define MOUSEKEY_DELAY 0 | |||||
#define MOUSEKEY_TIME_TO_MAX 60 | |||||
#define MOUSEKEY_MAX_SPEED 7 | |||||
#define MOUSEKEY_WHEEL_DELAY 0 | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* serial.c configuration for split keyboard */ | |||||
#define SOFT_SERIAL_PIN D0 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* Enables This makes it easier for fast typists to use dual-function keys */ | |||||
#define PERMISSIVE_HOLD | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLED_NUM 12 // Number of LEDs | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
// #define NO_DEBUG | |||||
/* disable print */ | |||||
// #define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION |
@ -0,0 +1,12 @@ | |||||
#include "dactyl_promicro.h" | |||||
#ifdef SSD1306OLED | |||||
void led_set_kb(uint8_t usb_led) { | |||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||||
led_set_user(usb_led); | |||||
} | |||||
#endif | |||||
void matrix_init_kb(void) { | |||||
matrix_init_user(); | |||||
}; |
@ -0,0 +1,39 @@ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#ifdef USE_I2C | |||||
#include <stddef.h> | |||||
#ifdef __AVR__ | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#endif | |||||
#endif | |||||
#define LAYOUT_6x6(\ | |||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \ | |||||
L55, L51, L52, R53, R54, R50, \ | |||||
L53, R52, \ | |||||
L54, R51 \ | |||||
)\ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05 }, \ | |||||
{ L10, L11, L12, L13, L14, L15 }, \ | |||||
{ L20, L21, L22, L23, L24, L25 }, \ | |||||
{ L30, L31, L32, L33, L34, L35 }, \ | |||||
{ L40, L41, L42, L43, L44, L45 }, \ | |||||
{ KC_NO, L51, L52, L53, L54, L55 }, \ | |||||
\ | |||||
{ R00, R01, R02, R03, R04, R05 }, \ | |||||
{ R10, R11, R12, R13, R14, R15 }, \ | |||||
{ R20, R21, R22, R23, R24, R25 }, \ | |||||
{ R30, R31, R32, R33, R34, R35 }, \ | |||||
{ R40, R41, R42, R43, R44, R45 }, \ | |||||
{ R50, R51, R52, R53, R54, KC_NO }, \ | |||||
} |
@ -0,0 +1,25 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#define USE_SERIAL | |||||
#define MASTER_RIGHT | |||||
// #define MASTER_RIGHT | |||||
//#define EE_HANDS | |||||
// Rows are doubled-up |
@ -0,0 +1,47 @@ | |||||
/* A QWERTY 3 Layer layout for the Dactyl Manuform 6x6 Keyboard */ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define RAISE MO(_RAISE) | |||||
#define LOWER MO(_LOWER) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_QWERTY] = LAYOUT_6x6( | |||||
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, | |||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, | |||||
KC_LSFT , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, | |||||
KC_LCTL , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM , KC_DOT ,KC_SLSH,KC_BSLASH, | |||||
KC_PLUS , KC_LEFT,KC_UP ,KC_DOWN, KC_RGHT, RAISE , LOWER , KC_HOME, KC_PGUP, KC_PGDN,KC_END ,KC_EQL, | |||||
_______,KC_LALT,KC_PSCR, KC_LGUI, KC_SPC, KC_ENT,KC_GRAVE, KC_AT ,KC_PSCR ,_______ | |||||
), | |||||
[_LOWER] = LAYOUT_6x6( | |||||
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, | |||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, | |||||
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, | |||||
_______,_______,_______,_______,_______,KC_PSCR, KC_P0 , KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, | |||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, | |||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______ | |||||
), | |||||
[_RAISE] = LAYOUT_6x6( | |||||
KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , | |||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, | |||||
_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, | |||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, | |||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, | |||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______ | |||||
), | |||||
}; |
@ -0,0 +1,25 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#define USE_SERIAL | |||||
#define MASTER_RIGHT | |||||
// #define MASTER_RIGHT | |||||
//#define EE_HANDS | |||||
// Rows are doubled-up |
@ -0,0 +1,47 @@ | |||||
/* A QWERTY 3 Layer layout for the Dactyl Manuform 6x6 Keyboard */ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define RAISE MO(_RAISE) | |||||
#define LOWER MO(_LOWER) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_QWERTY] = LAYOUT_6x6( | |||||
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, | |||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, | |||||
KC_LSFT , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, | |||||
KC_LCTL , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM , KC_DOT ,KC_SLSH,KC_BSLASH, | |||||
KC_PLUS , KC_LEFT,KC_UP ,KC_DOWN, KC_RGHT, RAISE , LOWER , KC_HOME, KC_PGUP, KC_PGDN,KC_END ,KC_EQL, | |||||
_______,KC_LALT,KC_PSCR, KC_LGUI, KC_SPC, KC_ENT,KC_GRAVE, KC_AT ,KC_PSCR ,_______ | |||||
), | |||||
[_LOWER] = LAYOUT_6x6( | |||||
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, | |||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, | |||||
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, | |||||
_______,_______,_______,_______,_______,KC_PSCR, KC_P0 , KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, | |||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, | |||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______ | |||||
), | |||||
[_RAISE] = LAYOUT_6x6( | |||||
KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , | |||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, | |||||
_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, | |||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, | |||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, | |||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______ | |||||
), | |||||
}; |
@ -0,0 +1,93 @@ | |||||
# Dactyl with Arduino Pro Micro | |||||
See https://github.com/adereth/dactyl-keyboard for the original Version. | |||||
This Dactyl uses the Arduino Pro Mirco (2x). | |||||
Wiring is a 6x6 Matrix like the [Dactyl Manuform](https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired/dactyl_manuform) | |||||
## Build the Firmware: | |||||
- Build the firmware with `make handwired/dactyl_promicro:<keymapname>`, for example `make handwired/dactyl:default` | |||||
- This will result in a hex file called `handwired_dactyl_promicro_<keymapname>.hex`, e.g. | |||||
`handwired_dactyl_promicro_default.hex` | |||||
How to setup your build enviroment can be found here: [Installing Build Tools](https://docs.qmk.fm/#/getting_started_build_tools) | |||||
## Required Hardware | |||||
Apart from diodes and key switches for the keyboard matrix in each half, you | |||||
will need: | |||||
* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. | |||||
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable | |||||
Alternatively, you can use any sort of cable and socket that has at least 3 | |||||
wires. If you want to use I2C to communicate between halves, you will need a | |||||
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors | |||||
## Optional Hardware | |||||
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. | |||||
## Wiring | |||||
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. | |||||
PD0 on the ATmega32u4) between the two Pro Micros. | |||||
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro | |||||
and modify the `matrix.c` accordingly. | |||||
The wiring for serial: | |||||
![serial wiring](https://i.imgur.com/C3D1GAQ.png) | |||||
The wiring for i2c: | |||||
![i2c wiring](https://i.imgur.com/Hbzhc6E.png) | |||||
The pull-up resistors may be placed on either half. It is also possible | |||||
to use 4 resistors and have the pull-ups in both halves, but this is | |||||
unnecessary in simple use cases. | |||||
You can change your configuration between serial and i2c by modifying your `config.h` file. | |||||
## Notes on Software Configuration | |||||
the keymaps in here are for the 4x5 layout of the keyboard only. | |||||
## Flashing | |||||
To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing). | |||||
Under Windows the most convenient way is installing the [QMK Drivers](https://github.com/qmk/qmk_driver_installer/releases) and use the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases). | |||||
## Choosing which board to plug the USB cable into (choosing Master) | |||||
### Setting the right or left hand as master | |||||
If you always plug the usb cable into the right board, add an extra flag to your `config.h` | |||||
``` | |||||
#define MASTER_RIGHT | |||||
``` | |||||
OR | |||||
``` | |||||
#define MASTER_LEFT | |||||
``` | |||||
Notes on Using Pro Micro 3.3V | |||||
----------------------------- | |||||
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects | |||||
the frequency on the 3.3V board. | |||||
Also, if the slave board is producing weird characters in certain columns, | |||||
update the following line in `matrix.c` to the following: | |||||
``` | |||||
// _delay_us(30); // without this wait read unstable value. | |||||
_delay_us(300); // without this wait read unstable value. | |||||
``` |
@ -0,0 +1,66 @@ | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = caterina | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
MIDI_ENABLE = no # MIDI controls | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
SPLIT_KEYBOARD = yes |