diff --git a/tmk_core/protocol/serial.h b/keyboards/hhkb/serial.h similarity index 100% rename from tmk_core/protocol/serial.h rename to keyboards/hhkb/serial.h diff --git a/tmk_core/protocol/serial_uart.c b/keyboards/hhkb/serial_uart.c similarity index 100% rename from tmk_core/protocol/serial_uart.c rename to keyboards/hhkb/serial_uart.c diff --git a/tmk_core/protocol/serial_soft.c b/tmk_core/protocol/serial_soft.c deleted file mode 100644 index 8624ef733c7..00000000000 --- a/tmk_core/protocol/serial_soft.c +++ /dev/null @@ -1,234 +0,0 @@ -/* -Copyright 2012 Jun WAKO - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ - -#include -#include -#include -#include -#include "serial.h" - -/* - * Stupid Inefficient Busy-wait Software Serial - * which is still useful for negative logic signal like Sun protocol - * if it is not supported by hardware UART. - * - * TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed. - */ - -#define WAIT_US (1000000L / SERIAL_SOFT_BAUD) - -#ifdef SERIAL_SOFT_LOGIC_NEGATIVE -# define SERIAL_SOFT_RXD_IN() !(SERIAL_SOFT_RXD_READ()) -# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_LO() -# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_HI() -#else -# define SERIAL_SOFT_RXD_IN() !!(SERIAL_SOFT_RXD_READ()) -# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_HI() -# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_LO() -#endif - -#ifdef SERIAL_SOFT_PARITY_EVEN -# define SERIAL_SOFT_PARITY_VAL 0 -#elif defined(SERIAL_SOFT_PARITY_ODD) -# define SERIAL_SOFT_PARITY_VAL 1 -#endif - -/* debug for signal timing, see debug pin with oscilloscope */ -#ifdef SERIAL_SOFT_DEBUG -# define SERIAL_SOFT_DEBUG_INIT() (DDRD |= 1 << 7) -# define SERIAL_SOFT_DEBUG_TGL() (PORTD ^= 1 << 7) -#else -# define SERIAL_SOFT_DEBUG_INIT() -# define SERIAL_SOFT_DEBUG_TGL() -#endif - -void serial_init(void) { - SERIAL_SOFT_DEBUG_INIT(); - - SERIAL_SOFT_RXD_INIT(); - SERIAL_SOFT_TXD_INIT(); -} - -/* RX ring buffer */ -#define RBUF_SIZE 8 -static uint8_t rbuf[RBUF_SIZE]; -static uint8_t rbuf_head = 0; -static uint8_t rbuf_tail = 0; - -uint8_t serial_recv(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return 0; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - return data; -} - -int16_t serial_recv2(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return -1; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - return data; -} - -void serial_send(uint8_t data) { - /* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */ - -#ifdef SERIAL_SOFT_BIT_ORDER_MSB -# ifdef SERIAL_SOFT_DATA_7BIT - uint8_t mask = 0x40; -# else - uint8_t mask = 0x80; -# endif -#else - uint8_t mask = 0x01; -#endif - - uint8_t parity = 0; - - /* start bit */ - SERIAL_SOFT_TXD_OFF(); - _delay_us(WAIT_US); - -#ifdef SERIAL_SOFT_DATA_7BIT - while (mask & 0x7F) { -#else - while (mask & 0xFF) { -#endif - if (data & mask) { - SERIAL_SOFT_TXD_ON(); - parity ^= 1; - } else { - SERIAL_SOFT_TXD_OFF(); - } - _delay_us(WAIT_US); - -#ifdef SERIAL_SOFT_BIT_ORDER_MSB - mask >>= 1; -#else - mask <<= 1; -#endif - } - -#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) - /* to center of parity bit */ - if (parity != SERIAL_SOFT_PARITY_VAL) { - SERIAL_SOFT_TXD_ON(); - } else { - SERIAL_SOFT_TXD_OFF(); - } - _delay_us(WAIT_US); -#endif - - /* stop bit */ - SERIAL_SOFT_TXD_ON(); - _delay_us(WAIT_US); -} - -/* detect edge of start bit */ -ISR(SERIAL_SOFT_RXD_VECT) { - SERIAL_SOFT_DEBUG_TGL(); - SERIAL_SOFT_RXD_INT_ENTER(); - - uint8_t data = 0; - -#ifdef SERIAL_SOFT_BIT_ORDER_MSB -# ifdef SERIAL_SOFT_DATA_7BIT - uint8_t mask = 0x40; -# else - uint8_t mask = 0x80; -# endif -#else - uint8_t mask = 0x01; -#endif - - uint8_t parity = 0; - - /* to center of start bit */ - _delay_us(WAIT_US / 2); - SERIAL_SOFT_DEBUG_TGL(); - do { - /* to center of next bit */ - _delay_us(WAIT_US); - - SERIAL_SOFT_DEBUG_TGL(); - if (SERIAL_SOFT_RXD_IN()) { - data |= mask; - parity ^= 1; - } -#ifdef SERIAL_SOFT_BIT_ORDER_MSB - mask >>= 1; -#else - mask <<= 1; -#endif -#ifdef SERIAL_SOFT_DATA_7BIT - } while (mask & 0x7F); -#else - } while (mask & 0xFF); -#endif - -#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) - /* to center of parity bit */ - _delay_us(WAIT_US); - if (SERIAL_SOFT_RXD_IN()) { - parity ^= 1; - } - SERIAL_SOFT_DEBUG_TGL(); -#endif - - /* to center of stop bit */ - _delay_us(WAIT_US); - - uint8_t next = (rbuf_head + 1) % RBUF_SIZE; -#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) - if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) { -#else - if (next != rbuf_tail) { -#endif - rbuf[rbuf_head] = data; - rbuf_head = next; - } - - SERIAL_SOFT_RXD_INT_EXIT(); - SERIAL_SOFT_DEBUG_TGL(); -}