Move matrix config to info.json, part 6 (#20019)

keyboards/cablecardesigns/cypher/rev6/config.h

@@ -2,13 +2,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B0, F1, F5, F6, F7, D1, F4, D4, C6, C7 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, B7, B3, B2, B1, F0 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cablecardesigns/cypher/rev6/info.json

@@ -6,6 +6,11 @@
       "pid": "0xAA99",
       "device_version": "0.0.2"
     },
+    "matrix_pins": {
+      "cols": ["D6", "D7", "B4", "B5", "B6", "B7", "B3", "B2", "B1", "F0"],
+      "rows": ["B0", "F1", "F5", "F6", "F7", "D1", "F4", "D4", "C6", "C7"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
       "pin": "D0",
       "levels": 5,

keyboards/caffeinated/serpent65/config.h

@@ -17,29 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS {B11, B10, B2, B1, B0, A7, A6, A5, B13, B12}
-#define MATRIX_COL_PINS {A1, A2, A3, A4, B14, B15, A8, A9}
-//{C13, C14, C15, A0,A2,A3,A4,A5,A6, A1,B12,B1}
-/* Unused pins, in the default layout, are:
-EncA (B6) because it is not used in the default PCB
-All Extra pins (A8, B15, B14, B13, B3, B5, B8, B9) , for the same reason;
-B0, which is unconnected on the PCB
-*/
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/caffeinated/serpent65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6501",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A1", "A2", "A3", "A4", "B14", "B15", "A8", "A9"],
+        "rows": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "B13", "B12"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/canary/canary60rgb/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0621",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C7", "F7", "F6", "F0", "B0", "B1", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B7"],
+        "rows": ["F5", "F4", "F1", "B3", "B2"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/canary/canary60rgb/v1/config.h

@@ -15,22 +15,6 @@
  */
  #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 }
-#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B6
 #ifdef RGB_DI_PIN
 #    define RGBLIGHT_EFFECT_BREATHING

keyboards/cannonkeys/adelie/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F1, B1, B0 }
-#define MATRIX_COL_PINS { F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN F0
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 3

keyboards/cannonkeys/adelie/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0005",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B2"],
+        "rows": ["F4", "F1", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/cannonkeys/aella/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A5, B0, B1, B2, B10, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A7 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cannonkeys/aella/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A5", "B0", "B1", "B2", "B10", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+        "rows": ["A13", "B12", "B11", "B14", "A8", "A7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/cannonkeys/an_c/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B2, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/an_c/info.json

@@ -8,6 +8,11 @@
         "pid": "0xA00C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B11", "B10", "B2", "A9", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "C13", "C14", "C15"],
+        "rows": ["B1", "B0", "A7", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/atlas/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A2, A1, A0, F1, F0, C15, C14, C13, B9, A15, A10, A9 }
-#define MATRIX_ROW_PINS { A8, B14, B12, B4, B3 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cannonkeys/atlas/info.json

@@ -8,6 +8,11 @@
         "pid": "0xA7A5",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "A15", "A10", "A9"],
+      "rows": ["A8", "B14", "B12", "B4", "B3"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

keyboards/cannonkeys/atlas_alps/config.h

@@ -16,15 +16,6 @@
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B4, D1, D7, D6 }
-#define MATRIX_COL_PINS { B6, C6, D2, E6, C7, B3, F7, F6, F5, F4, F1, F0 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/cannonkeys/atlas_alps/info.json

@@ -8,6 +8,11 @@
         "pid": "0xA7A5",
         "device_version": "0.1.0"
     },
+    "matrix_pins": {
+        "cols": ["B6", "C6", "D2", "E6", "C7", "B3", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["B5", "B4", "D1", "D7", "D6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["ortho_5x12"],

keyboards/cannonkeys/balance/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2, A1, F1, C15, B3, C14, C13, B9, B8, B7 }
-#define MATRIX_ROW_PINS { B4, A15, A14, A0, F0 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cannonkeys/balance/info.json

@@ -8,6 +8,11 @@
         "pid": "0xBA77",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "F1", "C15", "B3", "C14", "C13", "B9", "B8", "B7"],
+        "rows": ["B4", "A15", "A14", "A0", "F0"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B5", "pin_b": "B6", "resolution": 2}

keyboards/cannonkeys/brutalv2_65/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { C13, C15, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2 }
-#define MATRIX_ROW_PINS { C14, A1, B14, B15, A8 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cannonkeys/brutalv2_65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0008",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C13", "C15", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2"],
+        "rows": ["C14", "A1", "B14", "B15", "A8"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B3",
         "on_state": 0

keyboards/cannonkeys/chimera65/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B2, B1, A5, A4, A3, A2, A1, F0, C15, C14, A9, A8, A10, B3 }
-#define MATRIX_ROW_PINS { A13, A14, A15, C13, B8 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/chimera65/info.json

@@ -8,6 +8,11 @@
         "pid": "0xC024",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B11", "B10", "B2", "B1", "A5", "A4", "A3", "A2", "A1", "F0", "C15", "C14", "A9", "A8", "A10", "B3"],
+        "rows": ["A13", "A14", "A15", "C13", "B8"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/cloudline/config.h

@@ -3,10 +3,6 @@
 
 #pragma once
 
-#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B14, A8, A9, A10, A3, B0, A2, A1, A7, A0, B4, B6, B7 }
-#define MATRIX_ROW_PINS { A15, B3, B5, A4, A5, F1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/cloudline/info.json

@@ -8,6 +8,11 @@
         "pid": "0x000A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B1", "B2", "B10", "B11", "B12", "B14", "A8", "A9", "A10", "A3", "B0", "A2", "A1", "A7", "A0", "B4", "B6", "B7"],
+        "rows": ["A15", "B3", "B5", "A4", "A5", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/crin/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B0, C15, C14, A7, A5, C13, A4, A2, A1, A0, B9, B8, B7, A3, B6, B4, B3, A15 }
-#define MATRIX_ROW_PINS { B11, B10, B2, F0, B5 }
-#define DIODE_DIRECTION COL2ROW
-
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/crin/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0012",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "C15", "C14", "A7", "A5", "C13", "A4", "A2", "A1", "A0", "B9", "B8", "B7", "A3", "B6", "B4", "B3", "A15"],
+        "rows": ["B11", "B10", "B2", "F0", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/db60/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B2, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/db60/info.json

@@ -6,6 +6,11 @@
         "vid": "0xCA04",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B11", "B10", "B2", "A9", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "C13", "C14", "C15"],
+        "rows": ["B1", "B0", "A7", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/devastatingtkl/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B14, A8, A9, A10, A3, B0, A2, A1, A7, A0, B4, B6, B7 }
-#define MATRIX_ROW_PINS { A15, B3, B5, A4, A5, F1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/devastatingtkl/info.json

@@ -8,6 +8,11 @@
         "pid": "0xDE57",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B1", "B2", "B10", "B11", "B12", "B14", "A8", "A9", "A10", "A3", "B0", "A2", "A1", "A7", "A0", "B4", "B6", "B7"],
+        "rows": ["A15", "B3", "B5", "A4", "A5", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/gentoo/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { C13, C15, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2 }
-#define MATRIX_ROW_PINS { C14, A1, B14, B15, A8 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cannonkeys/gentoo/info.json

@@ -8,6 +8,11 @@
         "pid": "0x000F",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C13", "C15", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2"],
+        "rows": ["C14", "A1", "B14", "B15", "A8"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B3",
         "on_state": 0

keyboards/cannonkeys/gentoo_hs/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A8, C13, B9, B8, B7, B6, B5, B4, B3, A7, A5, A4, A3, A2, A1 }
-#define MATRIX_ROW_PINS { A14, A15, A0, B1, B0 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/cannonkeys/gentoo_hs/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0010",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A8", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A7", "A5", "A4", "A3", "A2", "A1"],
+        "rows": ["A14", "A15", "A0", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B14",
         "on_state": 0

keyboards/cannonkeys/hoodrowg/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { B5, B4, D7, F5, F6, F7, F4, D2, D0 }
-#define MATRIX_ROW_PINS { E6, B7, B0, B1, F1, F0, C6, C7, D4, D6, D5, D3 }
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D1
 #define RGBLED_NUM 16
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/cannonkeys/hoodrowg/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0006",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B5", "B4", "D7", "F5", "F6", "F7", "F4", "D2", "D0"],
+        "rows": ["E6", "B7", "B0", "B1", "F1", "F0", "C6", "C7", "D4", "D6", "D5", "D3"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B6",
         "scroll_lock": "B2"

keyboards/cannonkeys/instant60/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/instant60/info.json

@@ -8,6 +8,11 @@
         "pid": "0x1600",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B2", "B10", "B11", "A9", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "C13", "C14", "C15"],
+        "rows": ["B1", "B0", "A7", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/instant65/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A8, C13, B9, B8, B7, B6, B5, B4, B3, A7, A5, A4, A3, A2, A1 }
-#define MATRIX_ROW_PINS { A14, A15, A0, B1, B0 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/instant65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x1565",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A8", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A7", "A5", "A4", "A3", "A2", "A1"],
+        "rows": ["A14", "A15", "A0", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/iron165/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A8, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B12, B13, B14, B15, A1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/iron165/info.json

@@ -8,6 +8,11 @@
         "pid": "0x5165",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A5", "B10", "A3", "A2", "B0", "A8", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+        "rows": ["B12", "B13", "B14", "B15", "A1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/malicious_ergo/config.h

@@ -19,10 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B1, B0, A7, A1, A5, A4, A3, A10, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B2, B10, B11, A2, A0 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/malicious_ergo/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0009",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B1", "B0", "A7", "A1", "A5", "A4", "A3", "A10", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+        "rows": ["B2", "B10", "B11", "A2", "A0"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/nearfield/config.h

@@ -1,26 +0,0 @@
-/*
-Copyright 2021 Dr.Doof
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B4, D2, D4, D6, D7 }
-#define MATRIX_COL_PINS { D3, D5, C6, C7, B6, B5, B7, F0, F1, F4, F5, F6, F7, B3, B2, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/cannonkeys/nearfield/info.json

@@ -8,6 +8,11 @@
        "pid":"0x0002",
        "device_version":"0.0.1"
     },
+    "matrix_pins": {
+       "cols": ["D3", "D5", "C6", "C7", "B6", "B5", "B7", "F0", "F1", "F4", "F5", "F6", "F7", "B3", "B2", "D1"],
+       "rows": ["B4", "D2", "D4", "D6", "D7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "debounce": 0,

keyboards/cannonkeys/obliterated75/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/obliterated75/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0B75",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A5", "B10", "A3", "A2", "B0", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+        "rows": ["A13", "B12", "B11", "B14", "A8", "A1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/onyx/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B1, B0, C15, C14, A7, A5, C13, A4, A2, A1, A0, B9, B8, B7, A3, B6, B4, B3, A15 }
-#define MATRIX_ROW_PINS { B11, B10, B2, F0, B5 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/onyx/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0003",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B1", "B0", "C15", "C14", "A7", "A5", "C13", "A4", "A2", "A1", "A0", "B9", "B8", "B7", "A3", "B6", "B4", "B3", "A15"],
+        "rows": ["B11", "B10", "B2", "F0", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/ortho48/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14}
-#define MATRIX_ROW_PINS { B12, C13, A2, A1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 1
 

keyboards/cannonkeys/ortho48/info.json

@@ -8,6 +8,11 @@
     "pid": "0x4F48",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "B14", "A15", "A0", "C15", "C14"],
+    "rows": ["B12", "C13", "A2", "A1"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "A8",
     "levels": 6,

keyboards/cannonkeys/ortho60/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 1
 

keyboards/cannonkeys/ortho60/info.json

@@ -8,6 +8,11 @@
     "pid": "0x4F60",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0"],
+    "rows": ["B3", "B4", "B5", "B6", "B7"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "A8",
     "levels": 6,

keyboards/cannonkeys/ortho75/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, B14, A15, A0, C15, C14, B7, B6, B5 }
-#define MATRIX_ROW_PINS { B12, C13, A2, A1, A3 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 1
 

keyboards/cannonkeys/ortho75/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6464",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "B14", "A15", "A0", "C15", "C14", "B7", "B6", "B5"],
+    "rows": ["B12", "C13", "A2", "A1", "A3"]
+  },
+  "diode_direction": "COL2ROW",
   "encoder": {
     "rotary": [
       {"pin_a": "B9", "pin_b": "B8"}

keyboards/cannonkeys/practice60/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 }
-#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 1
 

keyboards/cannonkeys/practice60/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B11", "B10", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"],
+    "rows": ["B3", "B4", "B5", "B6", "B7"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "A8",
     "levels": 6,

keyboards/cannonkeys/practice65/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B8, B0, A0, B5, B10, B9, A6, B12, A7, A5, A4, A3, A2, A1, B13, B14 }
-#define MATRIX_ROW_PINS { B4, B11, B1, B7, B6 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD1
 #define BACKLIGHT_PWM_CHANNEL 1
 

keyboards/cannonkeys/practice65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6565",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B8", "B0", "A0", "B5", "B10", "B9", "A6", "B12", "A7", "A5", "A4", "A3", "A2", "A1", "B13", "B14"],
+        "rows": ["B4", "B11", "B1", "B7", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A8",
         "levels": 6,

keyboards/cannonkeys/rekt1800/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B12, A14, A15, B3, B4, B5, B6, B7, B8, B9, A7, B0, B1, B2, B10, A3, A4, A5, C15 }
-#define MATRIX_ROW_PINS { C13, C14, A0, A1, A2, B11 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/rekt1800/info.json

@@ -8,6 +8,11 @@
         "pid": "0x2377",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B12", "A14", "A15", "B3", "B4", "B5", "B6", "B7", "B8", "B9", "A7", "B0", "B1", "B2", "B10", "A3", "A4", "A5", "C15"],
+        "rows": ["C13", "C14", "A0", "A1", "A2", "B11"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/sagittarius/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A7, A5, A4, A3, A2, A1, A0, B5, A13, B2, B1, B0, B9, B8, B7, B6 }
-#define MATRIX_ROW_PINS { B10, B14, A8, A9, A10, C13, C14, C15, F0, F1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/sagittarius/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A7", "A5", "A4", "A3", "A2", "A1", "A0", "B5", "A13", "B2", "B1", "B0", "B9", "B8", "B7", "B6"],
+        "rows": ["B10", "B14", "A8", "A9", "A10", "C13", "C14", "C15", "F0", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/satisfaction75/config.h

@@ -23,10 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* LSE clock */
 #define STM32_LSECLK 32768
 
-#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 }
-#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 }
-#define DIODE_DIRECTION COL2ROW
-
 // I2C config
 #define I2C_DRIVER I2CD1
 #define I2C1_SCL_PIN B6

keyboards/cannonkeys/satisfaction75/info.json

@@ -8,6 +8,11 @@
         "pid": "0x57F5",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B1", "B2", "B10", "B11", "B12", "B13", "B14", "A8", "A9", "A10", "B0", "A7", "A5", "B5", "A15", "A1"],
+        "rows": ["B3", "B4", "A0", "A2", "A4", "A3"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B9", "pin_b": "B8", "resolution": 2}

keyboards/cannonkeys/savage65/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/savage65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x5A65",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A5", "B10", "A3", "A2", "B0", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+        "rows": ["B12", "B11", "B14", "A8", "A1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/tmov2/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B14, A14, B1, C13, C14, C15, F0, F1, B9, B8, B7, B6, B5, B4, B3, A15 }
-#define MATRIX_ROW_PINS { A10, A9, A8, B12 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/tmov2/info.json

@@ -8,6 +8,11 @@
         "pid": "0x70F2",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B14", "A14", "B1", "C13", "C14", "C15", "F0", "F1", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"],
+        "rows": ["A10", "A9", "A8", "B12"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/tsukuyomi/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { A7, A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/tsukuyomi/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A7", "A5", "B10", "A3", "A2", "B0", "A9", "C13", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+        "rows": ["B12", "B11", "B14", "A8", "A1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/cannonkeys/vicious40/config.h

@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B0, A7, A5, B1, B2, B10, B11, A9, B6, B7, B8, B9 }
-#define MATRIX_ROW_PINS { A15, B3, B4, B5 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/cannonkeys/vicious40/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0004",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "A7", "A5", "B1", "B2", "B10", "B11", "A9", "B6", "B7", "B8", "B9"],
+        "rows": ["A15", "B3", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/capsunlocked/cu24/config.h

@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6, F5, B4, B6, C6, C7 }
-#define MATRIX_COL_PINS { F0, F1, D0, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 /* RGB Glow */
 #define RGB_DI_PIN F4     // The pin the LED strip is connected to
 #define RGBLED_NUM 5     // Number of LEDs in your strip

keyboards/capsunlocked/cu24/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "D0", "D1"],
+        "rows": ["E6", "F5", "B4", "B6", "C6", "C7"]
+    },
+    "diode_direction": "ROW2COL",
     "backlight": {
         "pin": "B5",
         "levels": 5,

keyboards/capsunlocked/cu65/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F4, F5, F6, D3 }
-#define MATRIX_COL_PINS { D6, D7, D4, B4, B5, B6, C6, D5, C7, F0, E6, B0, B1, B7, B3, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/capsunlocked/cu65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0065",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D6", "D7", "D4", "B4", "B5", "B6", "C6", "D5", "C7", "F0", "E6", "B0", "B1", "B7", "B3", "B2"],
+        "rows": ["F1", "F4", "F5", "F6", "D3"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["65_ansi_blocker", "65_iso_blocker", "65_iso_blocker_split_bs"],

keyboards/capsunlocked/cu7/config.h

@@ -16,23 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D7, F0, F6 }
-#define MATRIX_COL_PINS { F5, F7, F4 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/capsunlocked/cu7/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F7", "F4"],
+        "rows": ["D7", "F0", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "D6", "pin_b": "D4", "resolution": 2}

keyboards/capsunlocked/cu75/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define DIODE_DIRECTION COL2ROW
-#define MATRIX_ROW_PINS {F1, B7, B3, D2, D3, B2}
-#define MATRIX_COL_PINS {F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, B1, B0, F0}
-
 #define RGB_DI_PIN C7  // Have to set it to something to get the ws2812 code to compile
 #define RGBLED_NUM 24     // Number of LEDs
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/capsunlocked/cu75/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6062",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "B1", "B0", "F0"],
+    "rows": ["F1", "B7", "B3", "D2", "D3", "B2"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "driver": "custom",
     "levels": 8

keyboards/capsunlocked/cu80/v1/config.h

@@ -17,13 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B1, B5, B4, F7, D7, D6 }
-#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, C7, C6, B6, B0, E6, B7, B3, B2, D2, D3, D5, D4}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE

keyboards/capsunlocked/cu80/v1/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F5", "F4", "F1", "F0", "C7", "C6", "B6", "B0", "E6", "B7", "B3", "B2", "D2", "D3", "D5", "D4"],
+        "rows": ["B1", "B5", "B4", "F7", "D7", "D6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["tkl_iso", "tkl_ansi"],

keyboards/carbo65/config.h

@@ -17,12 +17,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 }
-#define MATRIX_COL_PINS { A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14, B15 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE

keyboards/carbo65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4336",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A1", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B2", "B10", "B11", "B12", "B13", "B14", "B15"],
+        "rows": ["A2", "B9", "B8", "B5", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B6",
         "on_state": 0

keyboards/catch22/config.h

@@ -16,14 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* key combination for command */
 #define IS_COMMAND() ( \
     false \

keyboards/catch22/info.json

@@ -6,6 +6,11 @@
         "pid": "0xCA22",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B5", "B4", "E6", "D7", "C6"],
+        "rows": ["B6", "B2", "B3", "B1", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/cest73/tkm/config.h

@@ -15,18 +15,5 @@
   */ 
 #pragma once
 
-
-/* matrix sz handy ruler:  1   2   3   4   5   6   7   8   9  10  11  12 */
-/* key matrix pins */
-/*    row    handy ruler: r0  r1  r2  r3  r4  r5  r6  r7  r8  r9  r10 */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7, D0 }
-/*    column handy ruler: c0  c1  c2  c3  c4  c5  c6  c7  c8  c9 */
-#define MATRIX_COL_PINS { D1, D2, D3, D4, D5, D6, D7, F0, F1, F4 }
-
-//NOTE: if D6 pin shows any issues in exploatation the LED on the Teensy is to be removed
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* force n-key rollover*/
 #define FORCE_NKRO

keyboards/cest73/tkm/info.json

@@ -8,6 +8,11 @@
         "pid": "0xAA55",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D1", "D2", "D3", "D4", "D5", "D6", "D7", "F0", "F1", "F4"],
+        "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", "C6", "C7", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "E6"
     },

keyboards/chalice/config.h

@@ -17,13 +17,6 @@
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS {F4, D1, D0, F5, D4, F6, B4, B5, B2, B6}
-#define MATRIX_COL_PINS {F7, C6, B1, D2, E6, B3, D7}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 
 #ifdef RGBLIGHT_ENABLE

keyboards/chalice/info.json

@@ -8,6 +8,11 @@
         "pid": "0x000C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F7", "C6", "B1", "D2", "E6", "B3", "D7"],
+        "rows": ["F4", "D1", "D0", "F5", "D4", "F6", "B4", "B5", "B2", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {

keyboards/chaos65/config.h

@@ -16,13 +16,5 @@
 
 #pragma once
 
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* NKRO */
 #define FORCE_NKRO

keyboards/chaos65/info.json

@@ -8,6 +8,11 @@
         "pid": "0x1688",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "B1", "B2", "B3", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "F7", "F6", "F5", "F4"],
+        "rows": ["D0", "D1", "D2", "D3", "D5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["65_ansi_blocker", "65_ansi_blocker_tsangan", "65_iso_blocker"],

keyboards/charue/charon/config.h

@@ -1,24 +0,0 @@
-/*
-Copyright 2021 Charue Design
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, C7 }
-#define MATRIX_COL_PINS { D3, D5, B4, D7, D6, D4, F7, F6, F5, F4, F1, F0, B5, B6, C6 }
-#define DIODE_DIRECTION COL2ROW

keyboards/charue/charon/info.json

@@ -8,6 +8,11 @@
         "pid": "0x4348",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D3", "D5", "B4", "D7", "D6", "D4", "F7", "F6", "F5", "F4", "F1", "F0", "B5", "B6", "C6"],
+        "rows": ["B0", "B1", "B2", "B3", "C7"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "E6"
     },

keyboards/charue/sunsetter/config.h

@@ -1,22 +0,0 @@
-/*
-Copyright 2020 Michael Pio "Coarse" Mayol  <mfmayol@up.edu.ph>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define MATRIX_COL_PINS { B13, B12, B1, B0, A7, A6, A5, A4, A3, B9, B8, B7, B6, B5, B4, F0, B3, A15 }
-#define MATRIX_ROW_PINS { A8, B14, B11, B10, B2 }
-#define DIODE_DIRECTION COL2ROW

keyboards/charue/sunsetter/info.json

@@ -8,6 +8,11 @@
         "pid": "0x5353",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B13", "B12", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B9", "B8", "B7", "B6", "B5", "B4", "F0", "B3", "A15"],
+        "rows": ["A8", "B14", "B11", "B10", "B2"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "F1",
         "on_state": 0

keyboards/charue/sunsetter_r2/config.h

@@ -3,14 +3,6 @@
 
 #pragma once
 
-
-/* Keyboard Matrix Assignment s*/
-#define MATRIX_ROW_PINS { B3, B2, F4, F5, F6 }
-#define MATRIX_COL_PINS { F0, F1, F7, B1, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* RGB */
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN

keyboards/charue/sunsetter_r2/info.json

@@ -8,6 +8,11 @@
         "pid": "0x5335",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F7", "B1", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+        "rows": ["B3", "B2", "F4", "F5", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B0"
     },