Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Peter Park <peter@Peters-MacBook-Air.local>pull/14857/head
@ -0,0 +1,18 @@ | |||
/* | |||
Copyright 2021 Peter C. Park <peter@stenokeyboards.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "pro_micro.h" |
@ -0,0 +1,20 @@ | |||
# The Uni | |||
- Keyboard Maintainer: [Peter](https://github.com/petercpark) | |||
- Link to Keyboard Files: [The_Uni](https://github.com/petercpark/The_Uni) | |||
- Hardware Supported: | |||
- The Uni v1 and v2 (pro_micro) | |||
- Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com) | |||
# Bootloader | |||
Enter the bootloader by: | |||
* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB. | |||
* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND). | |||
Make examples for this keyboard (after setting up your build environment): | |||
make the_uni/pro_micro:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,22 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = no # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
STENO_ENABLE = yes |
@ -1,19 +1,31 @@ | |||
# The Uni | |||
![The Uni](https://raw.githubusercontent.com/petercpark/The_Uni/main/Pics/layout.png) | |||
![The Uni Closeup](https://github.com/petercpark/The_Uni/blob/main/Pics/close-up-uni.jpg?raw=true) | |||
| |||
![Layout](https://docs.stenokeyboards.com/images/uni-layout.png) | |||
![The Uni v2](https://github.com/petercpark/The_Uni/blob/main/Pics/uni%20v2/uni-v2.JPG?raw=true) | |||
A compact unibody split ortholinear keyboard made specifically for stenography. | |||
- Keyboard Maintainer: [Peter C. Park](https://github.com/petercpark) | |||
- Link to Keyboard Files: [The_Uni](https://github.com/petercpark/The_Uni) | |||
- Hardware Supported: The Uni v1 and v2 (pro micro or equivalent) | |||
- Hardware Availability: [website](https://www.stenokeyboards.com) | |||
- Keyboard Maintainer: [Peter](https://github.com/petercpark) | |||
- Link to Keyboard Files (pro_micro version): [https://github.com/petercpark/The_Uni](https://github.com/petercpark/The_Uni) | |||
- Hardware Supported: | |||
Make example for this keyboard (after setting up your build environment): | |||
- The Uni v1 and v2 (pro_micro) | |||
- The Uni v3 (usb_c) | |||
make the_uni:default | |||
- Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com) | |||
To enter the bootloader, short the rst and gnd pins with a conductive material such as a tweezer or a wire. Uni v2 will have reset pads next to the pro micro so you can short these pads to reset the pro micro. | |||
# Bootloader | |||
Enter the bootloader by: | |||
* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB. | |||
* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND). | |||
Make examples for this keyboard (after setting up your build environment): | |||
make the_uni/pro_micro:default | |||
make the_uni/usb_c:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -1,21 +0,0 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no | |||
FORCE_NKRO = yes | |||
EXTRAKEY_ENABLE = no | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
STENO_ENABLE = yes |
@ -0,0 +1,52 @@ | |||
/* | |||
Copyright 2021 Peter C. Park <peter@stenokeyboards.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x9000 | |||
#define PRODUCT_ID 0x0001 | |||
#define DEVICE_VER 0x0002 | |||
#define MANUFACTURER stenokeyboards | |||
#define PRODUCT The Uni | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 3 | |||
#define MATRIX_COLS 11 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { B7, D6, C7 } | |||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, D5, D3, D2, D1, D0, D4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/*force the nkro if it does not work*/ | |||
#define FORCE_NKRO |
@ -0,0 +1,20 @@ | |||
# The Uni v3 Firmware | |||
- Keyboard Maintainer: [Peter](https://github.com/petercpark) | |||
- Link to Keyboard Files: Not Available | |||
- Hardware Supported: | |||
- The Uni v3 (usb_c) | |||
- Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com) | |||
## Bootloader | |||
Enter the bootloader by: | |||
* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB. | |||
* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND). | |||
Make examples for this keyboard (after setting up your build environment): | |||
make the_uni/usb_c:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,22 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = no # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
STENO_ENABLE = yes |
@ -0,0 +1,30 @@ | |||
/* | |||
Copyright 2021 Peter C. Park <peter@stenokeyboards.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \ | |||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, \ | |||
K202, K203, K204, K205, K206, K207 \ | |||
) { \ | |||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \ | |||
{ KC_NO, KC_NO, K202, K203, K204, K205, K206, K207, KC_NO, KC_NO, KC_NO } \ | |||
} |