* [Keyboard] add Just60 keyboard
* [Keyboard] just60: fixes per suggestions
* Update keyboards/just60/rules.mk
* Update keyboards/just60/readme.md
* Update keyboards/just60/rules.mk
* [Keyboard] just60: add keymap specific bootloader
* Revert "[Keyboard] just60: add keymap specific bootloader"
This reverts commit 0357e0a6f4
.
pull/7761/head
@ -0,0 +1,54 @@ | |||
/* | |||
Copyright 2019 Jianfei Wang | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x1960 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER YDKB | |||
#define PRODUCT Just60 | |||
#define DESCRIPTION Just60 Keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
#define MATRIX_ROW_PINS { E2, C7, B3, B2, B1 } | |||
#define MATRIX_COL_PINS { D6, D7, B4, B6, B5, B7, F7, F6, F5, F4, F1, F0, E6, B0 } | |||
#define UNUSED_PINS | |||
#define DIODE_DIRECTION COL2ROW | |||
#define QMK_ESC_OUTPUT D6 // usually COL | |||
#define QMK_ESC_INPUT E2 // usually ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* disable these deprecated features by default */ | |||
#ifndef LINK_TIME_OPTIMIZATION_ENABLE | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,41 @@ | |||
/* Copyright 2019 Jianfei Wang | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K48 , \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D , \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D , \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, \ | |||
K40, K41, K42, K44, K45, K47, K49, K4A, K4B, K4C, K4D \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, KC_NO }, \ | |||
{ K40, K41, K42, KC_NO, K44, K45, KC_NO, K47, K48, K49, K4A, K4B, K4C, K4D }, \ | |||
} |
@ -0,0 +1,50 @@ | |||
/* Copyright 2019 Jianfei Wang | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN, | |||
_COMMAND | |||
}; | |||
#define FN_SPC LT(_FN, KC_SPC) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT( | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
MO(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||
KC_LCTL, KC_LALT, KC_LGUI, FN_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT | |||
), | |||
[_FN] = LAYOUT( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||
KC_CAPS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, KC_INS, KC_DEL, _______, | |||
_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, MO(_COMMAND), | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END | |||
), | |||
[_COMMAND] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, RESET, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,19 @@ | |||
# The default keymap for Just60 | |||
Just60 could be customized to many layouts, and this is just one of them. | |||
This layout is an ANSI layout with a Minila spacebar row. | |||
``` | |||
+-------------------------------------------------------------------------+ | |||
| ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BACKSP | | |||
+-------------------------------------------------------------------------+ | |||
| TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | | |||
+-------------------------------------------------------------------------+ | |||
| FN | A | S | D | F | G | H | J | K | L | ; | ' | RETURN | | |||
+-------------------------------------------------------------------------+ | |||
| LSHIFT | Z | X | C | V | B | N | M | , | . | / | RSHIFT | | |||
+-------------------------------------------------------------------------+ | |||
| LCMD | LALT | LGUI | FN | SPACE | RGUI | RALT | LEFT | DOWN | UP | RGHT | | |||
+-------------------------------------------------------------------------+ | |||
``` |
@ -0,0 +1,17 @@ | |||
# Just60 | |||
Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io. | |||
To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. | |||
Backlight LEDs and Bluetooth are not working yet. | |||
* Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer) | |||
* Hardware Supported: Just60 (atmega32u4) | |||
* Hardware Availability: https://item.taobao.com/item.htm?id=564176654249 | |||
Make example for this keyboard (after setting up your build environment): | |||
make just60:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,35 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency | |||
F_CPU = 8000000 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = lufa-ms | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = no # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs |