* Add GH80-3700 * Add via keymap * Update gh80_3700.h * Update config.h * LAYOUT_all -> LAYOUT_ortho_6x4 * Update readme.mdpull/10065/head
@ -0,0 +1,143 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x4705 | |||
#define PRODUCT_ID 0x633A | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Maartenwut | |||
#define PRODUCT GH80 3700 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 4 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS {B3,C7,C6,B6,B5,B4} | |||
#define MATRIX_COL_PINS {B0,D7,D6,D4} | |||
#define UNUSED_PINS {} | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
// #define RGB_DI_PIN B2 | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLED_NUM 8 | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
// #define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// /*== customize breathing effect ==*/ | |||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
// /*==== use exp() and sin() ====*/ | |||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
// Define rotary encoder | |||
#define ENCODERS_PAD_A { F1 } | |||
#define ENCODERS_PAD_B { F4 } |
@ -0,0 +1,46 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "gh80_3700.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
led_init_ports(); | |||
} | |||
void led_init_ports(void) { | |||
setPinOutput(E6); | |||
setPinOutput(B1); | |||
setPinOutput(D0); | |||
setPinOutput(D1); | |||
setPinOutput(F0); | |||
writePinHigh(E6); | |||
writePinHigh(B1); | |||
writePinHigh(D0); | |||
writePinHigh(D1); | |||
writePinHigh(F0); | |||
} | |||
bool led_update_kb(led_t led_state) { | |||
if(led_update_user(led_state)) { | |||
writePin(E6, !led_state.num_lock); | |||
} | |||
return true; | |||
} |
@ -0,0 +1,63 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_all LAYOUT_ortho_6x4 | |||
#define LAYOUT_ortho_6x4( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k20, k21, k22, k23, \ | |||
k30, k31, k32, k33, \ | |||
k40, k41, k42, k43, \ | |||
k50, k51, k52, k53 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03 }, \ | |||
{ k10, k11, k12, k13 }, \ | |||
{ k20, k21, k22, k23 }, \ | |||
{ k30, k31, k32, k33 }, \ | |||
{ k40, k41, k42, k43 }, \ | |||
{ k50, k51, k52, k53 } \ | |||
} | |||
#define LAYOUT_numpad_6x4( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k20, k21, k22, \ | |||
k30, k31, k32, k33, \ | |||
k40, k41, k42, \ | |||
k50, k52, k53 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03 }, \ | |||
{ k10, k11, k12, k13 }, \ | |||
{ k20, k21, k22, KC_NO }, \ | |||
{ k30, k31, k32, k33 }, \ | |||
{ k40, k41, k42, KC_NO }, \ | |||
{ k50, KC_NO, k52, k53 } \ | |||
} |
@ -0,0 +1,72 @@ | |||
{ | |||
"keyboard_name": "GH80-3700", | |||
"url": "https://github.com/Maartenwut/gh80-series/tree/master/GH80-3700", | |||
"maintainer": "Maartenwut", | |||
"width": 4, | |||
"height": 7, | |||
"layouts": { | |||
"LAYOUT_ortho_6x4": { | |||
"layout": [ | |||
{"x":0, "y":0}, | |||
{"x":1, "y":0}, | |||
{"x":2, "y":0}, | |||
{"x":3, "y":0}, | |||
{"x":0, "y":2}, | |||
{"x":1, "y":2}, | |||
{"x":2, "y":2}, | |||
{"x":3, "y":2}, | |||
{"x":0, "y":3}, | |||
{"x":1, "y":3}, | |||
{"x":2, "y":3}, | |||
{"x":3, "y":3}, | |||
{"x":0, "y":4}, | |||
{"x":1, "y":4}, | |||
{"x":2, "y":4}, | |||
{"x":3, "y":4}, | |||
{"x":0, "y":5}, | |||
{"x":1, "y":5}, | |||
{"x":2, "y":5}, | |||
{"x":3, "y":5}, | |||
{"x":0, "y":6}, | |||
{"x":1, "y":6}, | |||
{"x":2, "y":6}, | |||
{"x":3, "y":6} | |||
] | |||
}, | |||
"LAYOUT_numpad_6x4": { | |||
"layout": [ | |||
{"x":0, "y":0}, | |||
{"x":1, "y":0}, | |||
{"x":2, "y":0}, | |||
{"x":3, "y":0}, | |||
{"x":0, "y":2}, | |||
{"x":1, "y":2}, | |||
{"x":2, "y":2}, | |||
{"x":3, "y":2}, | |||
{"x":0, "y":3}, | |||
{"x":1, "y":3}, | |||
{"x":2, "y":3}, | |||
{"x":0, "y":4}, | |||
{"x":1, "y":4}, | |||
{"x":2, "y":4}, | |||
{"x":3, "y":3, "h":2}, | |||
{"x":0, "y":5}, | |||
{"x":1, "y":5}, | |||
{"x":2, "y":5}, | |||
{"x":0, "y":6, "w":2}, | |||
{"x":2, "y":6}, | |||
{"x":3, "y":5, "h":2} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,26 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ortho_6x4( | |||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC, | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, KC_PPLS, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_PENT, | |||
KC_P0, KC_P0, KC_PDOT, KC_PENT), | |||
}; |
@ -0,0 +1 @@ | |||
This is the default keymap for the GH80-3700. |
@ -0,0 +1,69 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#ifdef PS2_USE_USART | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 5 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 2 | |||
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ | |||
/* set DDR of CLOCK as input to be slave */ | |||
#define PS2_USART_INIT() do { \ | |||
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ | |||
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ | |||
UCSR1C = ((1 << UMSEL10) | \ | |||
(3 << UPM10) | \ | |||
(0 << USBS1) | \ | |||
(3 << UCSZ10) | \ | |||
(0 << UCPOL1)); \ | |||
UCSR1A = 0; \ | |||
UBRR1H = 0; \ | |||
UBRR1L = 0; \ | |||
} while (0) | |||
#define PS2_USART_RX_INT_ON() do { \ | |||
UCSR1B = ((1 << RXCIE1) | \ | |||
(1 << RXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_POLL_ON() do { \ | |||
UCSR1B = (1 << RXEN1); \ | |||
} while (0) | |||
#define PS2_USART_OFF() do { \ | |||
UCSR1C = 0; \ | |||
UCSR1B &= ~((1 << RXEN1) | \ | |||
(1 << TXEN1)); \ | |||
} while (0) | |||
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) | |||
#define PS2_USART_RX_DATA UDR1 | |||
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) | |||
#define PS2_USART_RX_VECT USART1_RX_vect | |||
#define PS2_MOUSE_ENABLE_SCROLLING | |||
#define PS2_MOUSE_INIT_DELAY 1000 | |||
#define PS2_MOUSE_BTN_LEFT 0 | |||
#define PS2_MOUSE_BTN_RIGHT 1 | |||
#define PS2_MOUSE_BTN_MIDDLE 2 | |||
#define PS2_MOUSE_X_MULTIPLIER 2 | |||
#define PS2_MOUSE_Y_MULTIPLIER 2 | |||
#define PS2_MOUSE_V_MULTIPLIER 1 | |||
#define PS2_MOUSE_SCROLL_BTN_MASK 0 | |||
#define PS2_MOUSE_USE_REMOTE_MODE | |||
#endif |
@ -0,0 +1,26 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ortho_6x4( | |||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC, | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, KC_PPLS, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_PENT, | |||
KC_P0, KC_P0, KC_PDOT, KC_PENT), | |||
}; |
@ -0,0 +1 @@ | |||
This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled. |
@ -0,0 +1,5 @@ | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
PS2_MOUSE_ENABLE = yes | |||
PS2_USE_USART = yes |
@ -0,0 +1,21 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#define RGB_DI_PIN B2 | |||
#define RGBLED_NUM 8 | |||
#define RGBLIGHT_ANIMATIONS |
@ -0,0 +1,26 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ortho_6x4( | |||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC, | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, KC_PPLS, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_PENT, | |||
KC_P0, KC_P0, KC_PDOT, KC_PENT), | |||
}; |
@ -0,0 +1 @@ | |||
This is a keymap for the GH80-3700 with RGB enabled. |
@ -0,0 +1,4 @@ | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
RGBLIGHT_ENABLE = yes |
@ -0,0 +1,50 @@ | |||
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ortho_6x4( | |||
KC_ESC, KC_TAB, KC_EQL, KC_BSPC, | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, KC_PPLS, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_PENT, | |||
KC_P0, KC_P0, KC_PDOT, KC_PENT), | |||
[1] = LAYOUT_ortho_6x4( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______), | |||
[2] = LAYOUT_ortho_6x4( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______), | |||
[3] = LAYOUT_ortho_6x4( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______), | |||
}; |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
LTO_ENABLE = yes |
@ -0,0 +1,15 @@ | |||
# GH80-3700 | |||
![GH80-3700](https://i.imgur.com/xMCzb8vl.jpg) | |||
## Support | |||
* Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut) | |||
* Hardware Supported: GH80-3700 PCB | |||
* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/gh80-3700-numpad-pcb/) | |||
## Build | |||
Make example for this keyboard (after setting up your build environment): | |||
make maartenwut/gh80_3700:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,24 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = qmk-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
ENCODER_ENABLE = yes # Enable support for rotary encoders | |||
LAYOUTS = numpad_6x4 ortho_6x4 |