Co-authored-by: Ryan <fauxpark@gmail.com>pull/13118/head
@ -0,0 +1,108 @@ | |||
/* | |||
Copyright 2020 <terry@terrymathews.net> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEAE | |||
#define PRODUCT_ID 0x8858 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER evangs | |||
#define PRODUCT JetVan | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 12 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
// Checked with Eagle Schematic | |||
#define MATRIX_ROW_PINS { D7, B5, F7, D4 } | |||
#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* Define RGB Underglow */ | |||
#define RGB_DI_PIN D0 | |||
#define RGBLED_NUM 10 | |||
#define RGBLIGHT_ANIMATIONS | |||
/* #define RGBLIGHT_LAYER_BLINK*/ | |||
/* Define less important options */ | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION |
@ -0,0 +1,14 @@ | |||
/* | |||
Copyright 2020 <terry@terrymathews.net> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "jetvan.h" |
@ -0,0 +1,29 @@ | |||
/* | |||
Copyright 2020 <terry@terrymathews.net> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ | |||
K30, K31, K32, K37, K39, K3A, K3B \ | |||
){ \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ | |||
{ K30, K31, K32, KC_NO, KC_NO, KC_NO, KC_NO, K37, KC_NO, K39, K3A, K3B } \ | |||
} |
@ -0,0 +1,36 @@ | |||
/* | |||
Copyright 2020 <terry@terrymathews.net> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layers { | |||
_LAYER0, | |||
_LAYER1, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_LAYER0] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(1), | |||
KC_LCTL, MO(1), KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_LAYER1] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(1), | |||
KC_LCTL, MO(1), KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT | |||
) | |||
}; |
@ -0,0 +1,54 @@ | |||
/* | |||
Copyright 2020 <terry@terrymathews.net> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layers { | |||
_LAYER0, | |||
_LAYER1, | |||
_LAYER2, | |||
_LAYER3, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_LAYER0] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(1), | |||
KC_LCTL, MO(1), KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_LAYER1] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(1), | |||
KC_LCTL, MO(1), KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_LAYER2] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(1), | |||
KC_LCTL, MO(1), KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_LAYER3] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, MO(1), | |||
KC_LCTL, MO(1), KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,13 @@ | |||
# JetVan | |||
A compact 44% keyboard. | |||
* Keyboard Maintainer: QMK Community | |||
* Hardware Supported: JetVan PCB | |||
* Hardware Availability: TBA | |||
Make example for this keyboard (after setting up your build environment): | |||
make thevankeyboards/jetvan:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,22 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output |