Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>pull/13141/head
@ -0,0 +1,254 @@ | |||
/* Copyright 2020 Richard Sutherland <rich@brickbots.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "spi_master.h" | |||
#include "adns.h" | |||
#include "debug.h" | |||
#include "quantum.h" | |||
#include "pointing_device.h" | |||
#include "adns9800_srom_A6.h" | |||
// registers | |||
#define REG_Product_ID 0x00 | |||
#define REG_Revision_ID 0x01 | |||
#define REG_Motion 0x02 | |||
#define REG_Delta_X_L 0x03 | |||
#define REG_Delta_X_H 0x04 | |||
#define REG_Delta_Y_L 0x05 | |||
#define REG_Delta_Y_H 0x06 | |||
#define REG_SQUAL 0x07 | |||
#define REG_Pixel_Sum 0x08 | |||
#define REG_Maximum_Pixel 0x09 | |||
#define REG_Minimum_Pixel 0x0a | |||
#define REG_Shutter_Lower 0x0b | |||
#define REG_Shutter_Upper 0x0c | |||
#define REG_Frame_Period_Lower 0x0d | |||
#define REG_Frame_Period_Upper 0x0e | |||
#define REG_Configuration_I 0x0f | |||
#define REG_Configuration_II 0x10 | |||
#define REG_Frame_Capture 0x12 | |||
#define REG_SROM_Enable 0x13 | |||
#define REG_Run_Downshift 0x14 | |||
#define REG_Rest1_Rate 0x15 | |||
#define REG_Rest1_Downshift 0x16 | |||
#define REG_Rest2_Rate 0x17 | |||
#define REG_Rest2_Downshift 0x18 | |||
#define REG_Rest3_Rate 0x19 | |||
#define REG_Frame_Period_Max_Bound_Lower 0x1a | |||
#define REG_Frame_Period_Max_Bound_Upper 0x1b | |||
#define REG_Frame_Period_Min_Bound_Lower 0x1c | |||
#define REG_Frame_Period_Min_Bound_Upper 0x1d | |||
#define REG_Shutter_Max_Bound_Lower 0x1e | |||
#define REG_Shutter_Max_Bound_Upper 0x1f | |||
#define REG_LASER_CTRL0 0x20 | |||
#define REG_Observation 0x24 | |||
#define REG_Data_Out_Lower 0x25 | |||
#define REG_Data_Out_Upper 0x26 | |||
#define REG_SROM_ID 0x2a | |||
#define REG_Lift_Detection_Thr 0x2e | |||
#define REG_Configuration_V 0x2f | |||
#define REG_Configuration_IV 0x39 | |||
#define REG_Power_Up_Reset 0x3a | |||
#define REG_Shutdown 0x3b | |||
#define REG_Inverse_Product_ID 0x3f | |||
#define REG_Motion_Burst 0x50 | |||
#define REG_SROM_Load_Burst 0x62 | |||
#define REG_Pixel_Burst 0x64 | |||
// pins | |||
#define NCS F7 | |||
extern const uint16_t firmware_length; | |||
extern const uint8_t firmware_data[]; | |||
enum motion_burst_propertr{ | |||
motion = 0, | |||
observation, | |||
delta_x_l, | |||
delta_x_h, | |||
delta_y_l, | |||
delta_y_h, | |||
squal, | |||
pixel_sum, | |||
maximum_pixel, | |||
minimum_pixel, | |||
shutter_upper, | |||
shutter_lower, | |||
frame_period_upper, | |||
frame_period_lower, | |||
end_data | |||
}; | |||
void adns_begin(void){ | |||
spi_start(NCS, false, 3, 8); | |||
} | |||
void adns_end(void){ | |||
spi_stop(); | |||
} | |||
void adns_write(uint8_t reg_addr, uint8_t data){ | |||
adns_begin(); | |||
//send address of the register, with MSBit = 1 to indicate it's a write | |||
spi_write(reg_addr | 0x80 ); | |||
spi_write(data); | |||
// tSCLK-NCS for write operation | |||
wait_us(20); | |||
// tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound | |||
wait_us(100); | |||
adns_end(); | |||
} | |||
uint8_t adns_read(uint8_t reg_addr){ | |||
adns_begin(); | |||
// send adress of the register, with MSBit = 0 to indicate it's a read | |||
spi_write(reg_addr & 0x7f ); | |||
uint8_t data = spi_read(); | |||
// tSCLK-NCS for read operation is 120ns | |||
wait_us(1); | |||
// tSRW/tSRR (=20us) minus tSCLK-NCS | |||
wait_us(19); | |||
adns_end(); | |||
return data; | |||
} | |||
void pointing_device_init(void) { | |||
dprint("STARTING INTI\n"); | |||
spi_init(); | |||
// reset serial port | |||
adns_begin(); | |||
adns_end(); | |||
// reboot | |||
adns_write(REG_Power_Up_Reset, 0x5a); | |||
wait_ms(50); | |||
// read registers and discard | |||
adns_read(REG_Motion); | |||
adns_read(REG_Delta_X_L); | |||
adns_read(REG_Delta_X_H); | |||
adns_read(REG_Delta_Y_L); | |||
adns_read(REG_Delta_Y_H); | |||
// upload firmware | |||
// set the configuration_IV register in 3k firmware mode | |||
// bit 1 = 1 for 3k mode, other bits are reserved | |||
adns_write(REG_Configuration_IV, 0x02); | |||
// write 0x1d in SROM_enable reg for initializing | |||
adns_write(REG_SROM_Enable, 0x1d); | |||
// wait for more than one frame period | |||
// assume that the frame rate is as low as 100fps... even if it should never be that low | |||
wait_ms(10); | |||
// write 0x18 to SROM_enable to start SROM download | |||
adns_write(REG_SROM_Enable, 0x18); | |||
// write the SROM file (=firmware data) | |||
// write burst destination adress | |||
adns_begin(); | |||
spi_write(REG_SROM_Load_Burst | 0x80); | |||
wait_us(15); | |||
// send all bytes of the firmware | |||
unsigned char c; | |||
for(int i = 0; i < firmware_length; i++){ | |||
c = (unsigned char)pgm_read_byte(firmware_data + i); | |||
spi_write(c); | |||
wait_us(15); | |||
} | |||
adns_end(); | |||
wait_ms(10); | |||
// enable laser(bit 0 = 0b), in normal mode (bits 3,2,1 = 000b) | |||
// reading the actual value of the register is important because the real | |||
// default value is different from what is said in the datasheet, and if you | |||
// change the reserved bytes (like by writing 0x00...) it would not work. | |||
uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0); | |||
adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0); | |||
wait_ms(1); | |||
// set the configuration_I register to set the CPI | |||
// 0x01 = 50, minimum | |||
// 0x44 = 3400, default | |||
// 0x8e = 7100 | |||
// 0xA4 = 8200, maximum | |||
adns_write(REG_Configuration_I, 0x10); | |||
wait_ms(100); | |||
dprint("INIT ENDED\n"); | |||
} | |||
int16_t convertDeltaToInt(uint8_t high, uint8_t low){ | |||
// join bytes into twos compliment | |||
//int16_t twos_comp = (high << 8) | low; | |||
//return twos_comp; | |||
return (high << 8) | low; | |||
} | |||
motion_delta_t readSensor(void) { | |||
adns_begin(); | |||
// read from Motion_Burst to enable burt mode | |||
spi_write(REG_Motion_Burst & 0x7f); | |||
// Wait one frame per docs, thanks u/kbjunky | |||
wait_us(100); | |||
uint8_t burst_data[pixel_sum]; | |||
for (int i = 0; i < pixel_sum; ++i) { | |||
burst_data[i] = spi_read(); | |||
} | |||
uint16_t delta_x = convertDeltaToInt(burst_data[delta_x_h], burst_data[delta_x_l]); | |||
uint16_t delta_y = convertDeltaToInt(burst_data[delta_y_h], burst_data[delta_y_l]); | |||
// Only consider the MSB for motion as this byte has other status bits | |||
uint8_t motion_ind = burst_data[motion] & 0b10000000; | |||
adns_end(); | |||
motion_delta_t delta = {delta_x, delta_y, motion_ind}; | |||
return delta; | |||
} | |||
void pointing_device_task(void) { | |||
motion_delta_t delta = readSensor(); | |||
report_mouse_t report = pointing_device_get_report(); | |||
if(delta.motion_ind) { | |||
// clamp deltas from -127 to 127 | |||
report.x = delta.delta_x < -127 ? -127 : delta.delta_x > 127 ? 127 : delta.delta_x; | |||
report.x = -report.x; | |||
report.y = delta.delta_y < -127 ? -127 : delta.delta_y > 127 ? 127 : delta.delta_y; | |||
} | |||
pointing_device_set_report(report); | |||
pointing_device_send(); | |||
} |
@ -0,0 +1,36 @@ | |||
/* Copyright 2020 Richard Sutherland <rich@brickbots.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
void adns_begin(void); | |||
void adns_end(void); | |||
void adns_write(uint8_t reg_addr, uint8_t data); | |||
uint8_t adns_read(uint8_t reg_addr); | |||
int16_t convertDeltaToInt(uint8_t high, uint8_t low); | |||
struct _motion_delta { | |||
int16_t delta_x; | |||
int16_t delta_y; | |||
int8_t motion_ind; | |||
}; | |||
typedef struct _motion_delta motion_delta_t; | |||
motion_delta_t readSensor(void); |
@ -0,0 +1,159 @@ | |||
/* | |||
Copyright 2021 bbrfkr | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER bbrfkr | |||
#define PRODUCT molecule | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 10 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { F4, F5, F6, B6 } | |||
#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
// #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 | |||
// #define USE_SERIAL | |||
//#define BACKLIGHT_PIN B7 | |||
//#define BACKLIGHT_LEVELS 3 | |||
//#define BACKLIGHT_BREATHING | |||
/* underglow LED */ | |||
// #define RGB_DI_PIN D3 | |||
// #ifdef RGBLIGHT_ENABLE | |||
// # define RGBLED_NUM 10 | |||
// # define RGBLED_SPLIT { 5, 5 } | |||
// # define RGBLIGHT_ANIMATIONS | |||
// #endif | |||
//#define RGB_DI_PIN E2 | |||
//#ifdef RGB_DI_PIN | |||
//# define RGBLED_NUM 16 | |||
//# define RGBLIGHT_HUE_STEP 8 | |||
//# define RGBLIGHT_SAT_STEP 8 | |||
//# define RGBLIGHT_VAL_STEP 8 | |||
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
//# define RGBLIGHT_ANIMATIONS | |||
/*== or choose animations ==*/ | |||
//# define RGBLIGHT_EFFECT_BREATHING | |||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
//# define RGBLIGHT_EFFECT_SNAKE | |||
//# define RGBLIGHT_EFFECT_KNIGHT | |||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
//#endif | |||
/* OLED */ | |||
#define OLED_TIMEOUT 0 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,215 @@ | |||
{ | |||
"keyboard_name": "molecule", | |||
"url": "https://github.com/bbrfkr/keyboards/tree/master/molecule", | |||
"maintainer": "bbrfkr", | |||
"width": 14.75, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ | |||
"label":"E", | |||
"x":2, | |||
"y":0 | |||
}, | |||
{ | |||
"label":"I", | |||
"x":11.75, | |||
"y":0 | |||
}, | |||
{ | |||
"label":"W", | |||
"x":1, | |||
"y":0.25 | |||
}, | |||
{ | |||
"label":"O", | |||
"x":12.75, | |||
"y":0.25 | |||
}, | |||
{ | |||
"label":"R", | |||
"x":3, | |||
"y":0.5 | |||
}, | |||
{ | |||
"label":"U", | |||
"x":10.75, | |||
"y":0.5 | |||
}, | |||
{ | |||
"label":"T", | |||
"x":4, | |||
"y":0.75 | |||
}, | |||
{ | |||
"label":"Y", | |||
"x":9.75, | |||
"y":0.75 | |||
}, | |||
{ | |||
"label":"Q", | |||
"x":0, | |||
"y":1 | |||
}, | |||
{ | |||
"label":"D", | |||
"x":2, | |||
"y":1 | |||
}, | |||
{ | |||
"label":"K", | |||
"x":11.75, | |||
"y":1 | |||
}, | |||
{ | |||
"label":"P", | |||
"x":13.75, | |||
"y":1 | |||
}, | |||
{ | |||
"label":"S", | |||
"x":1, | |||
"y":1.25 | |||
}, | |||
{ | |||
"label":"L", | |||
"x":12.75, | |||
"y":1.25 | |||
}, | |||
{ | |||
"label":"F", | |||
"x":3, | |||
"y":1.5 | |||
}, | |||
{ | |||
"label":"J", | |||
"x":10.75, | |||
"y":1.5 | |||
}, | |||
{ | |||
"label":"G", | |||
"x":4, | |||
"y":1.75 | |||
}, | |||
{ | |||
"label":"H", | |||
"x":9.75, | |||
"y":1.75 | |||
}, | |||
{ | |||
"label":"A", | |||
"x":0, | |||
"y":2 | |||
}, | |||
{ | |||
"label":"C", | |||
"x":2, | |||
"y":2 | |||
}, | |||
{ | |||
"label":",", | |||
"x":11.75, | |||
"y":2 | |||
}, | |||
{ | |||
"label":";", | |||
"x":13.75, | |||
"y":2 | |||
}, | |||
{ | |||
"label":"X", | |||
"x":1, | |||
"y":2.25 | |||
}, | |||
{ | |||
"label":".", | |||
"x":12.75, | |||
"y":2.25 | |||
}, | |||
{ | |||
"label":"V", | |||
"x":3, | |||
"y":2.5 | |||
}, | |||
{ | |||
"label":"M", | |||
"x":10.75, | |||
"y":2.5 | |||
}, | |||
{ | |||
"label":"B", | |||
"x":4, | |||
"y":2.75 | |||
}, | |||
{ | |||
"label":"N", | |||
"x":9.75, | |||
"y":2.75 | |||
}, | |||
{ | |||
"label":"Z", | |||
"x":0, | |||
"y":3 | |||
}, | |||
{ | |||
"label":"Shift", | |||
"x":2, | |||
"y":3 | |||
}, | |||
{ | |||
"label":"Alt", | |||
"x":5.25, | |||
"y":3 | |||
}, | |||
{ | |||
"label":"Super", | |||
"x":8.5, | |||
"y":3 | |||
}, | |||
{ | |||
"label":"Shift", | |||
"x":11.75, | |||
"y":3 | |||
}, | |||
{ | |||
"label":"/", | |||
"x":13.75, | |||
"y":3 | |||
}, | |||
{ | |||
"label":"Ctrl", | |||
"x":1, | |||
"y":3.25 | |||
}, | |||
{ | |||
"label":"Space", | |||
"x":6.25, | |||
"y":3.25, | |||
"h":1.5 | |||
}, | |||
{ | |||
"label":"Enter", | |||
"x":7.5, | |||
"y":3.25, | |||
"h":1.5 | |||
}, | |||
{ | |||
"label":"Ctrl", | |||
"x":12.75, | |||
"y":3.25 | |||
}, | |||
{ | |||
"label":"Lower", | |||
"x":5.25, | |||
"y":4 | |||
}, | |||
{ | |||
"label":"Raise", | |||
"x":8.5, | |||
"y":4 | |||
} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,39 @@ | |||
/* Copyright 2021 bbrfkr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_QWERTY_BASE, | |||
_EUCALYN_BASE, | |||
_LOWER, | |||
_RAISE, | |||
_FN, | |||
}; | |||
// Defines the keycodes used by our macros in process_record_user | |||
enum custom_keycodes { | |||
QMKBEST = SAFE_RANGE, | |||
QMKURL | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY_BASE] = LAYOUT(KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LCTL, KC_LSFT, MO(2), KC_LALT, KC_SPC, KC_ENT, KC_RGUI, MO(3), KC_RSFT, KC_RCTL), | |||
[_EUCALYN_BASE] = LAYOUT(KC_Q, KC_W, KC_COMM, KC_DOT, KC_SCLN, KC_M, KC_R, KC_D, KC_Y, KC_P, KC_A, KC_O, KC_E, KC_I, KC_U, KC_G, KC_T, KC_K, KC_S, KC_N, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_B, KC_H, KC_J, KC_L, KC_SLSH, KC_LCTL, KC_LSFT, MO(2), KC_LALT, KC_SPC, KC_ENT, KC_RGUI, MO(3), KC_RSFT, KC_RCTL), | |||
[_LOWER] = LAYOUT(KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F2, KC_F3, KC_WH_U, KC_F4, KC_F5, KC_F6, KC_F7, KC_UP, KC_F8, KC_F9, KC_F1, KC_MS_BTN2, KC_WH_D, KC_MS_BTN1, KC_F11, KC_F12, KC_LEFT, KC_DOWN, KC_RGHT, KC_F10, KC_LCTL, KC_LSFT, KC_TRNS, KC_LALT, KC_SPC, KC_ENT, KC_RGUI, MO(4), KC_RSFT, KC_RCTL), | |||
[_RAISE] = LAYOUT(KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_ESC, KC_DEL, KC_BSPC, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_QUOT, KC_LCBR, KC_RCBR, KC_CAPS, KC_TAB, KC_PSCR, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_DQUO, KC_LBRC, KC_RBRC, KC_LCTL, KC_LSFT, MO(4), KC_LALT, KC_SPC, KC_ENT, KC_RGUI, KC_TRNS, KC_RSFT, KC_RCTL), | |||
[_FN] = LAYOUT(KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BRIU, KC_VOLD, KC_NO, KC_NO, KC_NO, DF(0), DF(1), KC_NO, KC_NO, KC_NO, KC_BRID, KC_MUTE, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LCTL, KC_LSFT, KC_TRNS, KC_LALT, KC_SPC, KC_ENT, KC_RGUI, KC_TRNS, KC_RSFT, KC_RCTL) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for molecule |
@ -0,0 +1,17 @@ | |||
/* Copyright 2021 bbrfkr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "molecule.h" |
@ -0,0 +1,40 @@ | |||
/* Copyright 2021 bbrfkr | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ | |||
L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ | |||
L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ | |||
L30, L31, L32, L33, L34, R30, R31, R32, R33, R34 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, R00, R01, R02, R03, R04 }, \ | |||
{ L10, L11, L12, L13, L14, R10, R11, R12, R13, R14 }, \ | |||
{ L20, L21, L22, L23, L24, R20, R21, R22, R23, R24 }, \ | |||
{ L30, L31, L32, L33, L34, R30, R31, R32, R33, R34 }, \ | |||
} |
@ -0,0 +1,21 @@ | |||
# molecule | |||
[![molecule](https://imgur.com/uYCeS4Y)](https://i.imgur.com/uYCeS4Yh.jpg) | |||
A 40 keys keyboard with trackball. | |||
* Keyboard Maintainer: [bbrfkr](https://github.com/bbrfkr) [@bbrfkr](https://twitter.com/bbrfkr) | |||
* Hardware Supported: molecule PCB, Pro Micro | |||
* Hardware Availability: https://bbrfkr.booth.pm/ | |||
Make example for this keyboard (after setting up your build environment): | |||
make molecule:default | |||
Flashing example for this keyboard: | |||
make molecule:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
This keyboard project includes [aball](https://github.com/brickbots/aball) project source code partially. |
@ -0,0 +1,27 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
# Add trackball support | |||
POINTING_DEVICE_ENABLE = yes | |||
SRC += adns.c | |||
QUANTUM_LIB_SRC += spi_master.c |