@ -0,0 +1,70 @@ | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) | |||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) | |||||
MIDI_ENABLE ?= no # MIDI controls | |||||
AUDIO_ENABLE ?= no | |||||
UNICODE_ENABLE ?= no # Unicode | |||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
ifndef QUANTUM_DIR | |||||
include ../../Makefile | |||||
endif |
@ -0,0 +1,30 @@ | |||||
#include "amj60.h" | |||||
#include "led.h" | |||||
void matrix_init_kb(void) { | |||||
// put your keyboard start-up code here | |||||
// runs once when the firmware starts up | |||||
matrix_init_user(); | |||||
led_init_ports(); | |||||
}; | |||||
void matrix_scan_kb(void) { | |||||
// put your looping keyboard code here | |||||
// runs every cycle (a lot) | |||||
matrix_scan_user(); | |||||
}; | |||||
void led_init_ports(void) { | |||||
// * Set our LED pins as output | |||||
DDRB |= (1<<2); | |||||
} | |||||
void led_set_kb(uint8_t usb_led) { | |||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||||
// Turn capslock on | |||||
PORTB &= ~(1<<2); | |||||
} else { | |||||
// Turn capslock off | |||||
PORTB |= (1<<2); | |||||
} | |||||
} |
@ -0,0 +1,153 @@ | |||||
#ifndef AMJ60_H | |||||
#define AMJ60_H | |||||
#include "quantum.h" | |||||
// readability | |||||
#define XXX KC_NO | |||||
/* AMJ60 layout to the best of my knowledge matrix layout | |||||
* ,-----------------------------------------------------------. | |||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49| | |||||
* |-----------------------------------------------------------| | |||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | | |||||
* |-----------------------------------------------------------| | |||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | | |||||
* |-----------------------------------------------------------| | |||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c | 3d | | |||||
* |-----------------------------------------------------------| | |||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
#define KEYMAP( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ | |||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \ | |||||
) \ | |||||
{ \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ | |||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ | |||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ | |||||
} | |||||
/* | |||||
* ANSI | |||||
* ,-----------------------------------------------------------. | |||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | | |||||
* |-----------------------------------------------------------| | |||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | | |||||
* |-----------------------------------------------------------| | |||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | | |||||
* |-----------------------------------------------------------| | |||||
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | | |||||
* |-----------------------------------------------------------| | |||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
#define KEYMAP_ANSI( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ | |||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \ | |||||
) \ | |||||
{ \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ | |||||
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \ | |||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ | |||||
} | |||||
/* AMJ60 HHKB matrix layout | |||||
* ,------------------------------------------------------------. | |||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 | | |||||
* |------------------------------------------------------------| | |||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | | |||||
* |------------------------------------------------------------| | |||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | | |||||
* |------------------------------------------------------------| | |||||
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | | |||||
* |------------------------------------------------------------| | |||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | | |||||
* `------------------------------------------------------------' | |||||
*/ | |||||
#define KEYMAP_HHKB( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ | |||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \ | |||||
) \ | |||||
{ \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \ | |||||
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ | |||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \ | |||||
} | |||||
/* ISO | |||||
* ,-----------------------------------------------------------. | |||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | | |||||
* |-----------------------------------------------------------| | |||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | | |||||
* |-----------------------------------------------------------| | |||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | | |||||
* |-----------------------------------------------------------| | |||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | | |||||
* |-----------------------------------------------------------| | |||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
#define KEYMAP_ISO( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ | |||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \ | |||||
) \ | |||||
{ \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ | |||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \ | |||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ | |||||
} | |||||
/* ISO w/ split right shift key matrix layout | |||||
* ,-----------------------------------------------------------. | |||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | | |||||
* |-----------------------------------------------------------| | |||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | | |||||
* |-----------------------------------------------------------| | |||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d | | |||||
* |-----------------------------------------------------------| | |||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c | | |||||
* |-----------------------------------------------------------| | |||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
#define KEYMAP_ISO_SPLITRSHIFT( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \ | |||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \ | |||||
) \ | |||||
{ \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ | |||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ | |||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \ | |||||
} | |||||
void matrix_init_user(void); | |||||
void matrix_scan_user(void); | |||||
#endif |
@ -0,0 +1,94 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6066 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Han Chen | |||||
#define PRODUCT AMJ60 | |||||
#define DESCRIPTION qmk port of AMJ60 PCB | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 14 | |||||
// ROWS: Top to bottom, COLS: Left to right | |||||
#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5} | |||||
#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3} | |||||
#define UNUSED_PINS | |||||
#define BACKLIGHT_PIN B6 | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* Backlight configuration | |||||
*/ | |||||
#define BACKLIGHT_LEVELS 4 | |||||
/* Underlight configuration | |||||
*/ | |||||
#define RGB_DI_PIN E2 | |||||
#define RGBLIGHT_TIMER | |||||
#define RGBLED_NUM 8 // Number of LEDs | |||||
#define RGBLIGHT_HUE_STEP 10 | |||||
#define RGBLIGHT_SAT_STEP 17 | |||||
#define RGBLIGHT_VAL_STEP 17 | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
@ -0,0 +1,23 @@ | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
MIDI_ENABLE = no # MIDI controls | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,42 @@ | |||||
#!/bin/bash | |||||
# adjust for cpu | |||||
# -j 16 gave best result on a hyperthreaded quad core core i7 | |||||
LIMIT=10 | |||||
THREADS="-j 16" | |||||
KMAP=iso_split_rshift | |||||
echo "We need sudo later" | |||||
sudo ls 2>&1 /dev/null | |||||
function wait_bootloader { | |||||
echo "Waiting for Bootloader..." | |||||
local STARTTIME=$(date +"%s") | |||||
local REMIND=0 | |||||
local EXEC=dfu-programmer | |||||
local TARGET=atmega32u4 | |||||
while true | |||||
do | |||||
sudo $EXEC $TARGET get > /dev/null 2>&1 | |||||
[ $? -eq 0 ] && break | |||||
ENDTIME=$(date +"%s") | |||||
DURATION=$(($ENDTIME-$STARTTIME)) | |||||
if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] | |||||
then | |||||
echo "Did you forget to press the reset button?" | |||||
REMIND=1 | |||||
fi | |||||
sleep 1 | |||||
done | |||||
} | |||||
make clean | |||||
make KEYMAP=${KMAP} ${THREADS} | |||||
if [[ $? -eq 0 ]] | |||||
then | |||||
echo "please trigger flashing!" | |||||
wait_bootloader | |||||
sudo make KEYMAP=${KMAP} dfu ${THREADS} | |||||
else | |||||
echo "make failed" | |||||
exit 77 | |||||
fi |
@ -0,0 +1,147 @@ | |||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||||
// this is the style you want to emulate. | |||||
#include "amj60.h" | |||||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||||
// entirely and just use numbers. | |||||
#define _DEF 0 | |||||
#define _SPC 1 | |||||
#define _TAB 2 | |||||
#define _SFX 3 | |||||
// dual-role shortcuts | |||||
#define TABDUAL LT(_TAB, KC_TAB) | |||||
#define CAPSDUAL CTL_T(KC_ESC) | |||||
#define SPACEDUAL LT(_SPC, KC_SPACE) | |||||
#define ENTERDUAL CTL_T(KC_ENT) | |||||
// arrow cluster duality bottom right corner | |||||
#define ARRLEFT ALT_T(KC_LEFT) | |||||
#define ARRDOWN GUI_T(KC_DOWN) | |||||
#define ARRUP SFT_T(KC_UP) | |||||
#define ARRRIGHT CTL_T(KC_RIGHT) | |||||
// german brackets | |||||
#define GER_CUR_L RALT(KC_7) // [ | |||||
#define GER_CUR_R RALT(KC_0) // ] | |||||
#define GER_PAR_L LSFT(KC_8) // ( | |||||
#define GER_PAR_R LSFT(KC_9) // ) | |||||
#define GER_ANG_L KC_NUBS // < | |||||
#define GER_ANG_R LSFT(KC_NUBS) // > | |||||
#define GER_BRC_L RALT(KC_8) // [ | |||||
#define GER_BRC_R RALT(KC_9) // ] | |||||
// increase readability | |||||
#define _______ KC_TRNS | |||||
#define XXXXXXX KC_NO | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Keymap _DEF: Default Layer | |||||
* ,-----------------------------------------------------------. | |||||
* |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is | |||||
* `-----------------------------------------------------------' LEFT DWN RIGHT | |||||
*/ | |||||
[_DEF] = KEYMAP_ISO_SPLITRSHIFT( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ | |||||
TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ | |||||
CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \ | |||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \ | |||||
KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT), | |||||
/* Keymap 1: F-and-vim Layer, modified with Space (by holding space) | |||||
* ,-----------------------------------------------------------. | |||||
* |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete| | |||||
* |-----------------------------------------------------------| | |||||
* | |Paus| Up| [ | ] | | | | ( | ) | | | | | | |||||
* |-----------------------------------------------------------| | |||||
* | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY | | |||||
* |-----------------------------------------------------------| | |||||
* | | | | | < | > | |M0 | | | | | Vol+ | | | |||||
* |-----------------------------------------------------------| | |||||
* | | | | |Alt |Prev|Vol-|Next| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
[_SPC] = KEYMAP_ISO_SPLITRSHIFT( | |||||
KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ | |||||
_______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \ | |||||
_______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \ | |||||
_______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \ | |||||
_______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), | |||||
/* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab) | |||||
* ,-----------------------------------------------------------. | |||||
* |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE | |||||
* |-----------------------------------------------------------| | |||||
* | | | | | | | | | { | } | | | | | | |||||
* |-----------------------------------------------------------| | |||||
* | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn | | |||||
* |-----------------------------------------------------------| | |||||
* | | | | | | | |AF2| | | | | PgUp | | | |||||
* |-----------------------------------------------------------| | |||||
* | | | | |Alt |Pos1|PgDn|End | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
[_TAB] = KEYMAP_ISO_SPLITRSHIFT( | |||||
KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ | |||||
_______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \ | |||||
_______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \ | |||||
_______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \ | |||||
_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), | |||||
/* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key) | |||||
* ,-----------------------------------------------------------. | |||||
* |RSET| | | | | | | 7| 8| 9| | | |Backsp | | |||||
* |-----------------------------------------------------------| | |||||
* | | | | | | | | 4 | 5 | 6 | | | | \ | | |||||
* |-----------------------------------------------------------| | |||||
* | | L | L | | | | | 1 | 2 | 3 | | | Return | | |||||
* |-----------------------------------------------------------| | |||||
* | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent | |||||
* |-----------------------------------------------------------| LED controlling | |||||
* |Ctrl|Win |Alt | |Alt |Left|Down|Right| | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
[_SFX] = KEYMAP_ISO_SPLITRSHIFT( | |||||
RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \ | |||||
_______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \ | |||||
_______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \ | |||||
_______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \ | |||||
_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT), | |||||
}; | |||||
enum function_id { | |||||
LAUNCH, | |||||
RGBLED_TOGGLE, | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[1] = ACTION_FUNCTION(LAUNCH), | |||||
[10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||||
{ | |||||
// MACRODOWN only works in this function | |||||
switch(id) { | |||||
case 0: | |||||
return (record->event.pressed ? | |||||
MACRO( D(RALT), T(SPC), U(RALT), END ) | |||||
:MACRO( END )); | |||||
break; | |||||
case 1: | |||||
return (record->event.pressed ? | |||||
MACRO( D(LALT), T(F2), U(LALT), END ) | |||||
:MACRO( END )); | |||||
break; | |||||
} | |||||
return MACRO_NONE; | |||||
}; |
@ -0,0 +1,30 @@ | |||||
toneman77's custom spacefn Layout | |||||
===================== | |||||
##Quantum MK Firmware | |||||
For the full Quantum feature list, see the parent readme.md. | |||||
# Features | |||||
* heavily modified ISO (!) layout with split right shift key | |||||
* spaceFn | |||||
* Dual-Role keys: | |||||
* | |||||
| Original key | when tapped | when held | | |||||
| ---------------- | ------------- | ------------- | | |||||
| Space | Space | layer change | | |||||
| Caps lock | Escape | Control | | |||||
| Tab | Tab | layer change | | |||||
| Enter | Enter | Control | | |||||
* vim-style arrow keys on hjkl (spacefn layer) | |||||
* corresponding Home/PgDn/PgUp/End on hjkl (tab layer) | |||||
* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift | |||||
* more bonus arrow keys on wasd (spacefn layer) | |||||
* media keys prev/next/play/vol+/vol- (spacefn layer) | |||||
* firmware bootloader button | |||||
* additional brackets that only work in german layout due to horrible placement | |||||
in the default qwertz layout | |||||
### Additional Credits | |||||
* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys) |
@ -0,0 +1,4 @@ | |||||
#!/bin/bash | |||||
git checkout amj60 # gets you on branch amj60 | |||||
git fetch origin # gets you up to date with origin | |||||
git merge origin/master |
@ -0,0 +1,57 @@ | |||||
AMJ60 keyboard firmware | |||||
====================== | |||||
DIY/Assembled compact 60% keyboard. | |||||
## Quantum MK Firmware | |||||
For the full Quantum feature list, see [the parent readme.md](/readme.md). | |||||
## Building | |||||
Download or clone the whole firmware and navigate to the keyboards/amj60 | |||||
folder. Once your dev env is setup, you'll be able to type `make` to generate | |||||
your .hex - you can then use `make dfu` to program your PCB once you hit the | |||||
reset button. | |||||
Depending on which keymap you would like to use, you will have to compile | |||||
slightly differently. | |||||
### Default | |||||
To build with the default keymap, simply run `make`. | |||||
### Other Keymaps | |||||
Several version of keymap are available in advance but you are recommended to | |||||
define your favorite layout yourself. To define your own keymap create file | |||||
named `<name>.c` in the keymaps folder, and see keymap document (you can find | |||||
in top readme.md) and existent keymap files. | |||||
To build the firmware binary hex file with a keymap just do `make` with | |||||
`KEYMAP` option like: | |||||
`` | |||||
$ make KEYMAP=[default|jack|<name>] | |||||
`` | |||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` | |||||
folder. | |||||
## Variations | |||||
KEYMAP macros for the following layouts are available: | |||||
* default, for all the available, possible keys | |||||
* ANSI, for 60% ANSI keyboard | |||||
* ISO | |||||
* ISO w/ split right shift key | |||||
* HHKB | |||||
Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge. | |||||
### Original tmk firmware | |||||
The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60). | |||||
## Further information | |||||
Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found | |||||
* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0) | |||||
* [chinese discussion](https://www.v2ex.com/t/161887) | |||||
* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module | |||||
* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1). | |||||
* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/) |