Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/22743/head
@ -0,0 +1,6 @@ | |||
// Copyright 2023 Jesse Leventhal (@The=Mad-Noodle) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 5 |
@ -1,59 +1,52 @@ | |||
{ | |||
"keyboard_name": "Noodle Pad v1", | |||
"manufacturer": "The Mad Noodle", | |||
"url": "instagram.com/the_mad_noodle", | |||
"maintainer": "The-Mad-Noodle", | |||
"usb": { | |||
"vid": "0xFEED", | |||
"pid": "0x1701", | |||
"device_version": "0.0.1" | |||
}, | |||
"matrix_pins": { | |||
"cols": ["B4", "B5", "B6"], | |||
"rows": ["D4", "D6", "D7"] | |||
}, | |||
"diode_direction": "ROW2COL", | |||
"encoder": { | |||
"rotary": [ | |||
{"pin_a": "D0", "pin_b": "D1"} | |||
] | |||
}, | |||
"rgblight": { | |||
"led_count": 4, | |||
"sleep": true, | |||
"animations": { | |||
"breathing": true, | |||
"rainbow_mood": true, | |||
"rainbow_swirl": true, | |||
"snake": true, | |||
"knight": true, | |||
"christmas": true, | |||
"static_gradient": true, | |||
"rgb_test": true, | |||
"alternating": true, | |||
"twinkle": true | |||
} | |||
}, | |||
"ws2812": { | |||
"pin": "B7" | |||
}, | |||
"processor": "atmega32u4", | |||
"bootloader": "atmel-dfu", | |||
"layouts": { | |||
"LAYOUT_ortho_3x3": { | |||
"layout": [ | |||
{"matrix": [0, 0], "x": 0, "y": 0}, | |||
{"matrix": [0, 1], "x": 1, "y": 0}, | |||
{"matrix": [0, 2], "x": 2, "y": 0}, | |||
"manufacturer": "The Mad Noodle", | |||
"keyboard_name": "NoodlePad", | |||
"maintainer": "The-Mad-Noodle", | |||
"url": "https://www.madnoodleprototypes.com/", | |||
"bootloader": "atmel-dfu", | |||
"processor": "atmega32u4", | |||
"diode_direction": "ROW2COL", | |||
"features": { | |||
"bootmagic": true, | |||
"command": false, | |||
"console": false, | |||
"extrakey": true, | |||
"mousekey": true, | |||
"nkro": true, | |||
"rgblight": true, | |||
"encoder": true | |||
}, | |||
"rgblight": { | |||
"hue_steps": 10, | |||
"led_count": 4, | |||
"sleep": true, | |||
"animations": { | |||
"breathing": true, | |||
"rainbow_mood": true, | |||
"rainbow_swirl": true, | |||
"snake": true, | |||
"knight": true, | |||
"christmas": true, | |||
"static_gradient": true, | |||
"rgb_test": true, | |||
"alternating": true, | |||
"twinkle": true | |||
} | |||
}, | |||
"layouts": { | |||
"LAYOUT_ortho_3x3": { | |||
"layout": [ | |||
{"x":0, "y":0, "matrix": [0,0]}, | |||
{"label":"Encoder", "x":1, "y":0, "matrix": [0,1]}, | |||
{"x":2, "y":0, "matrix": [0,2]}, | |||
{"x":0, "y":1, "matrix": [1,0]}, | |||
{"x":1, "y":1, "matrix": [1,1]}, | |||
{"x":2, "y":1, "matrix": [1,2]}, | |||
{"x":0, "y":2, "matrix": [2,0]}, | |||
{"x":1, "y":2, "matrix": [2,1]}, | |||
{"x":2, "y":2, "matrix": [2,2]} | |||
] | |||
} | |||
}, | |||
{"matrix": [1, 0], "x": 0, "y": 1}, | |||
{"matrix": [1, 1], "x": 1, "y": 1}, | |||
{"matrix": [1, 2], "x": 2, "y": 1}, | |||
{"matrix": [2, 0], "x": 0, "y": 2}, | |||
{"matrix": [2, 1], "x": 1, "y": 2}, | |||
{"matrix": [2, 2], "x": 2, "y": 2} | |||
] | |||
} | |||
} | |||
} | |||
} |
@ -0,0 +1 @@ | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,85 @@ | |||
// Copyright 2023 The Mad Noodle(@the_mad_noodle) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* LAYER 0 | |||
* ,-------|ENCODER|-------. | |||
* | << | MUTE | >> | | |||
* |-------+-------+-------| | |||
* | STOP | PLAY | MEDIA | | |||
* |-------+-------+-------| | |||
* | CALC | MY PC | TO(3) | | |||
* `-----------------------' | |||
*/ | |||
[0] = LAYOUT_ortho_3x3( | |||
KC_MPRV, KC_MUTE, KC_MNXT, | |||
KC_MSTP, KC_MPLY, KC_MSEL, | |||
KC_CALC, KC_MYCM, TO(3) | |||
), | |||
/* LAYER 1 | |||
* ,-------|ENCODER|-------. | |||
* | MODE+ |RGB TOG| MODE- | | |||
* |-------+-------+-------| | |||
* |Bright-| PLAIN |Bright+| | |||
* |-------+-------+-------| | |||
* | SWIRL |BREATH | TO(0) | | |||
* `-----------------------' | |||
*/ | |||
[1] = LAYOUT_ortho_3x3( | |||
RGB_MOD, RGB_TOG, RGB_RMOD, | |||
RGB_VAD, RGB_M_P, RGB_VAI, | |||
RGB_M_SW, RGB_M_B, TO(0) | |||
), | |||
/* LAYER 2 | |||
* ,-------|ENCODER|-------. | |||
* | | | | | |||
* |-------+-------+-------| | |||
* | | | | | |||
* |-------+-------+-------| | |||
* | | | TO(0) | | |||
* `-----------------------' | |||
*/ | |||
[2] = LAYOUT_ortho_3x3( | |||
KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, TO(0) | |||
), | |||
/* LAYER 3 | |||
* ,-------|ENCODER|-------. | |||
* | | | | | |||
* |-------+-------+-------| | |||
* | TO(1) | | TO(2) | | |||
* |-------+-------+-------| | |||
* | | | TO(0) | | |||
* `-----------------------' | |||
*/ | |||
[3] = LAYOUT_ortho_3x3( | |||
KC_TRNS, KC_TRNS, KC_TRNS, | |||
TO(1), KC_TRNS, TO(2), | |||
KC_TRNS, KC_TRNS, TO(0) | |||
) | |||
}; | |||
/*Encoder Mapping*/ | |||
#if defined(ENCODER_MAP_ENABLE) | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU)}, | |||
[1] = { ENCODER_CCW_CW(RGB_HUD, RGB_HUI)}, | |||
[2] = { ENCODER_CCW_CW(RGB_SAD, RGB_SAI)}, | |||
[3] = { ENCODER_CCW_CW(KC_UP, KC_DOWN)}, | |||
}; | |||
#endif |
@ -0,0 +1,2 @@ | |||
ENCODER_MAP_ENABLE = yes | |||
VIA_ENABLE = yes |
@ -1,17 +0,0 @@ | |||
# Noodle Pad v1 Keypad with Encoder | |||
![NoodlePad TOP](https://static.wixstatic.com/media/59d0ff_052f27ee5ae84266821af7277c51c4ed~mv2.jpg) | |||
![NoodlePad RGB](https://static.wixstatic.com/media/59d0ff_c91f2adc258547a38cc5b480a8d9c510~mv2.jpg) | |||
The Noodle Pad by The Mad Noodle Prototypes is a custom 3x3 mechanical keypad with an encoder knob and full RGB Underglow. | |||
* Keyboard Maintainer: [The Mad Noodle Prototypes](https://github.com/The-Mad-Noodle) | |||
* Hardware Supported: NoodlePad PCB, ATmega32U4 | |||
* Hardware Availability: [MadNoodlePrototypes.com](https://www.madnoodleprototypes.com/shop) | |||
Make example for this keyboard (after setting up your build environment): | |||
make themadnoodle/noodlepad:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. | |||
Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -1,14 +1,3 @@ | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
UNICODE_ENABLE = yes # Unicode | |||
ENCODER_ENABLE = yes | |||
# Default folder for noodlepad | |||
DEFAULT_FOLDER = themadnoodle/noodlepad/v1 | |||
@ -0,0 +1,25 @@ | |||
{ | |||
"manufacturer": "The Mad Noodle", | |||
"keyboard_name": "NoodlePad v1", | |||
"maintainer": "The-Mad-Noodle", | |||
"url": "https://www.madnoodleprototypes.com/", | |||
"ws2812": { | |||
"pin": "B7" | |||
}, | |||
"matrix_pins": { | |||
"rows": ["D4", "D6", "D7"], | |||
"cols": ["B4", "B5", "B6"] | |||
}, | |||
"processor": "atmega32u4", | |||
"usb": { | |||
"device_version": "1.0.0", | |||
"pid": "0x0001", | |||
"vid": "0x6A6C" | |||
}, | |||
"encoder": { | |||
"rotary": [ | |||
{ "pin_a": "D0", "pin_b": "D1" } | |||
] | |||
} | |||
} |
@ -0,0 +1,27 @@ | |||
# NoodlePad v.1 | |||
![NoodPad v1](https://i.imgur.com/dmThaHq.jpg) | |||
The Noodlepad v.1 is a 8 key macro keypad with a push button encoder knob. | |||
* Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle) | |||
* Hardware Supported: NoodlePad v.1 PCB | |||
* Hardware Availability: https://www.madnoodleprototypes.com/shop | |||
Compile example for this keyboard (after setting up your build environment): | |||
qmk compile -kb themadnoodle/noodlepad/v1 -km default | |||
Flashing example for this keyboard: | |||
qmk flash -kb themadnoodle/noodlepad/v1 -km default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader & Flashing | |||
**Physical reset button**: | |||
* Press the physical button located on the top left of the back of the PCB (Labeled RST) to enter Bootloader Mode |
@ -0,0 +1 @@ | |||
#this file was left intentionally blank |
@ -0,0 +1,24 @@ | |||
{ | |||
"manufacturer": "The Mad Noodle", | |||
"keyboard_name": "NoodlePad v2", | |||
"maintainer": "The-Mad-Noodle", | |||
"url": "https://www.madnoodleprototypes.com/", | |||
"ws2812": { | |||
"pin": "B7" | |||
}, | |||
"matrix_pins": { | |||
"cols": ["F0", "B5", "B6"], | |||
"rows": ["F1", "D6", "D7"] | |||
}, | |||
"usb": { | |||
"device_version": "2.0.0", | |||
"pid": "0x0002", | |||
"vid": "0x6A6C" | |||
}, | |||
"encoder": { | |||
"rotary": [ | |||
{ "pin_a": "D0", "pin_b": "D1" } | |||
] | |||
} | |||
} |
@ -0,0 +1,27 @@ | |||
# NoodlePad v.2 | |||
![NoodPad v2](https://i.imgur.com/tzP0tdzh.jpg) | |||
The Noodlepad v.2 is a 8 hotswap key macro keypad with a push button encoder knob. | |||
* Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle) | |||
* Hardware Supported: NoodlePad v.2 PCB | |||
* Hardware Availability: https://www.madnoodleprototypes.com/shop | |||
Compile example for this keyboard (after setting up your build environment): | |||
qmk compile -kb themadnoodle/noodlepad/v2 -km default | |||
Flashing example for this keyboard: | |||
qmk flash -kb themadnoodle/noodlepad/v2 -km default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader & Flashing | |||
**Physical reset button**: | |||
* Press the physical button located on the top left of the back of the PCB (Labeled RST) to enter Bootloader Mode |
@ -0,0 +1 @@ | |||
#this file was left intentionally blank |