Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>pull/9707/head
@ -0,0 +1,40 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
// #define MATRIX_ROW_PINS { D0, D1, D3, D2 } | |||
// #define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } | |||
#define MATRIX_ROW_PINS { B7, D6, C7, F5 } | |||
#define MATRIX_COL_PINS { D7, B5, D1, D0, C6, B6, F0, D2, D3, F4, F1 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
#define OUTPUT_AUTO_ENABLE |
@ -0,0 +1,16 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "feather.h" |
@ -0,0 +1,17 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once |
@ -0,0 +1,60 @@ | |||
# Bluetreus - a conversion of an Atreus to use a Bluetooth microcontroller | |||
I have created a keymap for this with Bluetooth control on layer 2 so that you | |||
can switch the keyboard between auto, USB only, and Bluetooth only. I'm | |||
working on fixing turning on auto by default, but have still not succeeded. | |||
To build it and flash it, do: | |||
``` | |||
make atreus/feather:clash:flash | |||
``` | |||
## Wiring it up | |||
Physically, SDA to pin 13 on the new board are connected to what 9-1 were | |||
connected to on the old board. Pin 0 from the old board is brought over to the | |||
other side with a jumper wire to pin a2. TX, RX, A5, A4, A3 on the new board | |||
connect to what a0 to 12 connected to on the old board. GND attaches to g. | |||
You have to bend some of the pins at about a 45 degree angle to make them line up. | |||
Here's a side view of what the most bent pins look like: | |||
![Side View](https://i.imgur.com/S6ngibe.jpg) | |||
Here's a top view, USB port down, wireless antenna up. Note: the USB port orientation is opposite what it used to be. | |||
![Top View](https://i.imgur.com/DBjkxU2.jpg) | |||
### New board: | |||
This is an [Adafruit Feather BLE](https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/pinouts) | |||
|QMK | Screen Print | Feather |SCREEN|QMK REF | | |||
|----|--------------|-------------|------|---------| | |||
| D1 | SDA | RADIO | dfu | | | |||
| D0 | SCL | | 1/TX | D3 | | |||
| C6 | 5 | | 0/RX | D2 | | |||
| D7 | 6 | | MISO | B3/Blue | | |||
| B5 | 9 | | MOSI | B2/Blue | | |||
| B6 | 10 | | SCK | B1/Blue | | |||
| B7 | 11 | | A5 | F0 | | |||
| D6 | 12 | | a4 | F1 | | |||
| C7 | 13 | | a3 | F4 | | |||
| | usb | | a2 | F5 | | |||
| | e0 | | a1 | F6 | | |||
| | bat | | a0 | | | |||
| | Battery | | GND | | | |||
| | Connector | | ARf | | | |||
| | | | | USB PORT | 3V | | | |||
| | v v | | RST | | | |||
### Old board: | |||
This is an A Star, non-flipped | |||
|QMK| Scrn | A | Scrn|QMK | | |||
|---|------|-----|-----|----| | |||
| b5| 9 | USB | a0 | F7 | | |||
| b4| 8 | port| a1 | F6 | | |||
| e6| 7 | | 10 | B6 | | |||
| d7| 6 | | 11 | B7 | | |||
| c6| 5 | | 12 | D6 | | |||
| d4| 4 | | rst | RST| | |||
| d0| 3 | | 3v | x | | |||
| d1| 2 | | 5v | x | | |||
| d3| 1 | | g | G | | |||
| d2| 0 | | v | x | |
@ -0,0 +1,21 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency | |||
F_CPU = 8000000 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BLUETOOTH = AdafruitBLE | |||
CONSOLE_ENABLE = no |
@ -0,0 +1,41 @@ | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _QW 0 | |||
#define _RS 1 | |||
#define _LW 2 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QW] = LAYOUT( /* Qwerty */ | |||
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , | |||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , | |||
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , | |||
KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT | |||
), | |||
/* | |||
* ! @ up { } || pgup 7 8 9 * | |||
* # left down right $ || pgdn 4 5 6 + | |||
* [ ] ( ) & || ` 1 2 3 \ | |||
* lower insert super shift del ctrl || alt space fn . 0 = | |||
*/ | |||
[_RS] = LAYOUT( /* [> RAISE <] */ | |||
KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR , | |||
KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS , | |||
KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS , | |||
TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_DEL, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ), | |||
/* | |||
* insert home mup end pgup || mouse1 F7 F8 F9 F10 | |||
* USB mlft mdwn mrght pgdn || mouse2 F4 F5 F6 F11 | |||
* Blue volup reset || mouse3 F1 F2 F3 F12 | |||
* auto voldn super shift bksp ctrl || alt space L0 prtsc scroll pause | |||
*/ | |||
[_LW] = LAYOUT( /* [> LOWER <] */ | |||
KC_INS, KC_HOME, KC_MS_U, KC_END, KC_PGUP, KC_BTN1, KC_F7, KC_F8, KC_F9, KC_F10 , | |||
OUT_USB, KC_MS_L, KC_MS_D, KC_MS_R, KC_PGDN, KC_BTN2, KC_F4, KC_F5, KC_F6, KC_F11 , | |||
OUT_BT, KC_VOLU, KC_NO, KC_NO, RESET, KC_BTN3, KC_F1, KC_F2, KC_F3, KC_F12 , | |||
OUT_AUTO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) | |||
}; |