* initial commit * get rid of some of the vanilla code * set up matrix and pins * Create LAYOUT macro and an appropriate keymap * support for caps lock LED * add some documentation to the doro67 parent readme * align the language used in the several readme files * initial commit * get rid of some of the vanilla code * set up matrix and pins * Create LAYOUT macro and an appropriate keymap * support for caps lock LED * add some documentation to the doro67 parent readme * align the language used in the several readme files * Use RGB Matrix and fix enter key bug * fix formatting * remove merge conflict artifacts * make a more useful default keymap * add configurator support for the RGB pcb * fix rgb matrix based on new info. Multipler should be reversed * forgot to actually set the pin output for caps lock led * fix offset keys in layer 1 keymap * code cleanup * use macros for the rgb_led calculations struct * set RGB led num to 67 as I mistakenly counted the caps lock led * cleanup config.h file * add RGB note in readme * get consistent naming in config file * fix some inconsistencies * readjust matrix and get rid of macros based on drashna's suggestionspull/5684/head
@ -0,0 +1,12 @@ | |||
# Doro67 | |||
The Doro67 is a 65% USB C, integrated plate keyboard with blocker based on the M65-a by Keyclack/Rama. | |||
The [Group Buy](https://geekhack.org/index.php?topic=97265.0) was run by 80ultraman in coordination with Alf for machining and Backprop Studios for PCB design. | |||
There were 3 different PCBs available for this group buy. | |||
## **Please be aware of which PCB you own and flash the correct firmware on it.** | |||
**Regular:** PCB made for the China GB which only had 1 layout. | |||
**Multi:** PCB made for the international GB comprising of multiple layouts. While several layouts were possible, layout was determined by the integrated plate layout chosen by the customer. | |||
**RGB:** PCB made for the international GB which had an identical switch matrix and layout to the regular PCB, with the addition of per key RGB LEDs. |
@ -0,0 +1,71 @@ | |||
/* | |||
Copyright 2019 MechMerlin | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Backprop Studio | |||
#define PRODUCT Doro67 RGB PCB | |||
#define DESCRIPTION 65% custom keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } | |||
#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
// The pin connected to the data pin of the LEDs | |||
#define RGB_DI_PIN B7 | |||
// The number of LEDs connected | |||
#define DRIVER_LED_TOTAL 67 | |||
#define RGB_MATRIX_KEYPRESSES | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
#define RGBLED_NUM 67 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE |
@ -0,0 +1,82 @@ | |||
{ | |||
"keyboard_name": "Doro 67 RGB", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 16, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"key_count": 67, | |||
"layout": [ | |||
{"label":"K00", "x":0, "y":0}, | |||
{"label":"K01", "x":1, "y":0}, | |||
{"label":"K02", "x":2, "y":0}, | |||
{"label":"K03", "x":3, "y":0}, | |||
{"label":"K04", "x":4, "y":0}, | |||
{"label":"K05", "x":5, "y":0}, | |||
{"label":"K06", "x":6, "y":0}, | |||
{"label":"K07", "x":7, "y":0}, | |||
{"label":"K08", "x":8, "y":0}, | |||
{"label":"K09", "x":9, "y":0}, | |||
{"label":"K0A", "x":10, "y":0}, | |||
{"label":"K0B", "x":11, "y":0}, | |||
{"label":"K0C", "x":12, "y":0}, | |||
{"label":"K0D", "x":13, "y":0, "w":2}, | |||
{"label":"K0E", "x":15, "y":0}, | |||
{"label":"K10", "x":0, "y":1, "w":1.5}, | |||
{"label":"K11", "x":1.5, "y":1}, | |||
{"label":"K12", "x":2.5, "y":1}, | |||
{"label":"K13", "x":3.5, "y":1}, | |||
{"label":"K14", "x":4.5, "y":1}, | |||
{"label":"K15", "x":5.5, "y":1}, | |||
{"label":"K16", "x":6.5, "y":1}, | |||
{"label":"K17", "x":7.5, "y":1}, | |||
{"label":"K18", "x":8.5, "y":1}, | |||
{"label":"K19", "x":9.5, "y":1}, | |||
{"label":"K1A", "x":10.5, "y":1}, | |||
{"label":"K1B", "x":11.5, "y":1}, | |||
{"label":"K1C", "x":12.5, "y":1}, | |||
{"label":"K1D", "x":13.5, "y":1, "w":1.5}, | |||
{"label":"K1E", "x":15, "y":1}, | |||
{"label":"K20", "x":0, "y":2, "w":1.75}, | |||
{"label":"K21", "x":1.75, "y":2}, | |||
{"label":"K22", "x":2.75, "y":2}, | |||
{"label":"K23", "x":3.75, "y":2}, | |||
{"label":"K24", "x":4.75, "y":2}, | |||
{"label":"K25", "x":5.75, "y":2}, | |||
{"label":"K26", "x":6.75, "y":2}, | |||
{"label":"K27", "x":7.75, "y":2}, | |||
{"label":"K28", "x":8.75, "y":2}, | |||
{"label":"K29", "x":9.75, "y":2}, | |||
{"label":"K2A", "x":10.75, "y":2}, | |||
{"label":"K2B", "x":11.75, "y":2}, | |||
{"label":"K2D", "x":12.75, "y":2, "w":2.25}, | |||
{"label":"K2E", "x":15, "y":2}, | |||
{"label":"K30", "x":0, "y":3, "w":2.25}, | |||
{"label":"K32", "x":2.25, "y":3}, | |||
{"label":"K33", "x":3.25, "y":3}, | |||
{"label":"K34", "x":4.25, "y":3}, | |||
{"label":"K35", "x":5.25, "y":3}, | |||
{"label":"K36", "x":6.25, "y":3}, | |||
{"label":"K37", "x":7.25, "y":3}, | |||
{"label":"K38", "x":8.25, "y":3}, | |||
{"label":"K39", "x":9.25, "y":3}, | |||
{"label":"K3A", "x":10.25, "y":3}, | |||
{"label":"K3B", "x":11.25, "y":3}, | |||
{"label":"K3C", "x":12.25, "y":3, "w":1.75}, | |||
{"label":"K3D", "x":14, "y":3}, | |||
{"label":"K3E", "x":15, "y":3}, | |||
{"label":"K40", "x":0, "y":4, "w":1.25}, | |||
{"label":"K41", "x":1.25, "y":4, "w":1.25}, | |||
{"label":"K42", "x":2.5, "y":4, "w":1.25}, | |||
{"label":"K43", "x":3.75, "y":4, "w":6.25}, | |||
{"label":"K49", "x":10, "y":4, "w":1.25}, | |||
{"label":"K4A", "x":11.25, "y":4, "w":1.25}, | |||
{"label":"K4C", "x":13, "y":4}, | |||
{"label":"K4D", "x":14, "y":4}, | |||
{"label":"K4E", "x":15, "y":4} | |||
] | |||
} | |||
} | |||
} | |||
@ -0,0 +1,19 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// place overrides here |
@ -0,0 +1,62 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines the keycodes used by our macros in process_record_user | |||
enum custom_keycodes { | |||
QMKBEST = SAFE_RANGE, | |||
QMKURL | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( \ | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, \ | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ | |||
), | |||
[1] = LAYOUT( \ | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, \ | |||
QMKBEST, QMKURL, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ | |||
), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QMKBEST: | |||
if (record->event.pressed) { | |||
// when keycode QMKBEST is pressed | |||
SEND_STRING("QMK is the best thing ever!"); | |||
} else { | |||
// when keycode QMKBEST is released | |||
} | |||
break; | |||
case QMKURL: | |||
if (record->event.pressed) { | |||
// when keycode QMKURL is pressed | |||
SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); | |||
} else { | |||
// when keycode QMKURL is released | |||
} | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
# The default keymap for rgb |
@ -0,0 +1,17 @@ | |||
# Doro67 RGB PCB | |||
65% custom keyboard made by 80ultraman/Alf/Backprop Studios with in switch RGB featuring the same switch matrix and layout as the regular PCB. | |||
Flashing the regular PCB firmware on this board will work, but will disable RGB lighting. | |||
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) | |||
Hardware Supported: Doro 67 RGB PCB | |||
Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0) | |||
Make example for this keyboard (after setting up your build environment): | |||
make doro67/rgb:default | |||
**RGB Note:** The WS2812 string of LEDs starts from the `K00` key connected to pin `B7` and is connected from left to right, top to bottom, following the physical layout of the board. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,127 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rgb.h" | |||
// Optional override functions below. | |||
// You can leave any or all of these undefined. | |||
// These are only required if you want to perform custom actions. | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
setPinOutput(E6); | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { | |||
writePinLow(E6); | |||
} else { | |||
writePinHigh(E6); | |||
} | |||
led_set_user(usb_led); | |||
} | |||
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { | |||
{{0|(0<<4)}, {15*0, 0}, 0}, // Esc | |||
{{0|(1<<4)}, {15*1, 0}, 0}, // 1 | |||
{{0|(2<<4)}, {15*2, 0}, 0}, // 2 | |||
{{0|(3<<4)}, {15*3, 0}, 0}, // 3 | |||
{{0|(4<<4)}, {15*4, 0}, 0}, // 4 | |||
{{0|(5<<4)}, {15*5, 0}, 0}, // 5 | |||
{{0|(6<<4)}, {15*6, 0}, 0}, // 6 | |||
{{0|(7<<4)}, {15*7, 0}, 0}, // 7 | |||
{{0|(8<<4)}, {15*8, 0}, 0}, // 8 | |||
{{0|(9<<4)}, {15*9, 0}, 0}, // 9 | |||
{{0|(10<<4)}, {15*10, 0}, 0}, // 0 | |||
{{0|(11<<4)}, {15*11, 0}, 0}, // - | |||
{{0|(12<<4)}, {15*12, 0}, 0}, // = | |||
{{0|(13<<4)}, {15*13.5, 0}, 1}, // Backspace | |||
{{0|(14<<4)}, {15*15, 0}, 1}, // Ins | |||
{{1|(0<<4)}, {15*0.5, 16}, 1}, // Tab | |||
{{1|(1<<4)}, {15*1.5, 16}, 0}, // Q | |||
{{1|(2<<4)}, {15*2.5, 16}, 0}, // W | |||
{{1|(3<<4)}, {15*3.5, 16}, 0}, // E | |||
{{1|(4<<4)}, {15*4.5, 16}, 0}, // R | |||
{{1|(5<<4)}, {15*5.5, 16}, 0}, // T | |||
{{1|(6<<4)}, {15*6.5, 16}, 0}, // Y | |||
{{1|(7<<4)}, {15*7.5, 16}, 0}, // U | |||
{{1|(8<<4)}, {15*8.5, 16}, 0}, // I | |||
{{1|(9<<4)}, {15*9.5, 16}, 0}, // O | |||
{{1|(10<<4)}, {15*10.5, 16}, 0}, // P | |||
{{1|(11<<4)}, {15*11.5, 16}, 0}, // [ | |||
{{1|(12<<4)}, {15*12.5, 16}, 0}, // ] | |||
{{1|(13<<4)}, {15*13.75, 16}, 1}, // | |||
{{1|(14<<4)}, {15*15, 16}, 1}, // Del | |||
{{2|(0<<4)}, {15*0.75, 32}, 1}, // Capslock | |||
{{2|(1<<4)}, {15*1.75, 32}, 0}, // A | |||
{{2|(2<<4)}, {15*2.75, 32}, 0}, // S | |||
{{2|(3<<4)}, {15*3.75, 32}, 0}, // D | |||
{{2|(4<<4)}, {15*4.75, 32}, 0}, // F | |||
{{2|(5<<4)}, {15*5.75, 32}, 0}, // G | |||
{{2|(6<<4)}, {15*6.75, 32}, 0}, // H | |||
{{2|(7<<4)}, {15*7.75, 32}, 0}, // J | |||
{{2|(8<<4)}, {15*8.75, 32}, 0}, // K | |||
{{2|(9<<4)}, {15*9.75, 32}, 0}, // L | |||
{{2|(10<<4)}, {15*10.75, 32}, 0}, // ; | |||
{{2|(11<<4)}, {15*11.75, 32}, 0}, // ' | |||
{{2|(13<<4)}, {15*13.25, 32}, 1}, // Enter | |||
{{2|(14<<4)}, {15*15, 32}, 1}, // Pgup | |||
{{3|(0<<4)}, {15*1.25, 48}, 1}, // LShift | |||
{{3|(2<<4)}, {15*2, 48}, 0}, // Z | |||
{{3|(3<<4)}, {15*3, 48}, 0}, // X | |||
{{3|(4<<4)}, {15*4, 48}, 0}, // C | |||
{{3|(5<<4)}, {15*5, 48}, 0}, // V | |||
{{3|(6<<4)}, {15*6, 48}, 0}, // B | |||
{{3|(7<<4)}, {15*7, 48}, 0}, // N | |||
{{3|(8<<4)}, {15*8, 48}, 0}, // M | |||
{{3|(9<<4)}, {15*9, 48}, 0}, // , | |||
{{3|(10<<4)}, {15*10, 48}, 0}, // . | |||
{{3|(11<<4)}, {15*11, 48}, 0}, // / | |||
{{3|(12<<4)}, {15*12.75, 48}, 1}, // Shift | |||
{{3|(13<<4)}, {15*14, 48}, 1}, // Up | |||
{{3|(14<<4)}, {15*15, 48}, 1}, // Pgdn | |||
{{4|(0<<4)}, {15*0.25, 64}, 1}, // Ctrl | |||
{{4|(1<<4)}, {15*1.5, 64}, 1}, // GUI | |||
{{4|(2<<4)}, {15*2.25, 64}, 1}, // Alt | |||
{{4|(3<<4)}, {15*6.75, 64}, 0}, // Space | |||
{{4|(9<<4)}, {15*9, 64}, 1}, // RAlt | |||
{{4|(10<<4)}, {15*10.25, 64}, 1}, // FN | |||
{{4|(12<<4)}, {15*13, 64}, 1}, // Left | |||
{{4|(13<<4)}, {15*14, 64}, 1}, // Down | |||
{{4|(14<<4)}, {15*15, 64}, 1}, // Right | |||
}; |
@ -0,0 +1,41 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k43, k49, k4A, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4A, KC_NO, k4C, k4D, k4E }, \ | |||
} |
@ -0,0 +1,83 @@ | |||
# MCU name | |||
#MCU = at90usb1286 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = atmel-dfu | |||
# If you don't know the bootloader type, then you can specify the | |||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
RGB_MATRIX_ENABLE = WS2812 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) |