|
|
@ -22,7 +22,6 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_<N>` de |
|
|
|
| `IS31FL3731_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | |
|
|
|
| `IS31FL3731_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | |
|
|
|
| `IS31FL3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | | |
|
|
|
| `IS31FL3731_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | |
|
|
|
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | |
|
|
|
| `IS31FL3731_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | | |
|
|
|
| `IS31FL3731_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | | |
|
|
@ -44,7 +43,6 @@ Here is an example using 2 drivers. |
|
|
|
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND |
|
|
|
#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA |
|
|
|
|
|
|
|
#define IS31FL3731_DRIVER_COUNT 2 |
|
|
|
#define DRIVER_1_LED_TOTAL 25 |
|
|
|
#define DRIVER_2_LED_TOTAL 24 |
|
|
|
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
|
|
@ -91,7 +89,6 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de |
|
|
|
| `IS31FL3733_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | |
|
|
|
| `IS31FL3733_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | |
|
|
|
| `IS31FL3733_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | |
|
|
|
| `IS31FL3733_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | |
|
|
|
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | |
|
|
|
| `IS31FL3733_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | | |
|
|
|
| `IS31FL3733_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | | |
|
|
@ -130,7 +127,6 @@ Here is an example using 2 drivers. |
|
|
|
#define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND |
|
|
|
#define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_VCC |
|
|
|
|
|
|
|
#define IS31FL3733_DRIVER_COUNT 2 |
|
|
|
#define DRIVER_1_LED_TOTAL 58 |
|
|
|
#define DRIVER_2_LED_TOTAL 10 |
|
|
|
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
|
|
@ -178,7 +174,6 @@ Configure the hardware via your `config.h`: |
|
|
|
| `IS31FL3736_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | |
|
|
|
| `IS31FL3736_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | |
|
|
|
| `IS31FL3736_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | |
|
|
|
| `IS31FL3736_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | |
|
|
|
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | |
|
|
|
| `IS31FL3736_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | | |
|
|
|
| `IS31FL3736_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | | |
|
|
@ -214,7 +209,6 @@ Here is an example using 2 drivers. |
|
|
|
#define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND |
|
|
|
#define IS31FL3736_I2C_ADDRESS_2 IS31FL3736_I2C_ADDRESS_GND_SCL |
|
|
|
|
|
|
|
#define IS31FL3736_DRIVER_COUNT 2 |
|
|
|
#define DRIVER_1_LED_TOTAL 30 |
|
|
|
#define DRIVER_2_LED_TOTAL 32 |
|
|
|
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
|
|
@ -255,7 +249,6 @@ Configure the hardware via your `config.h`: |
|
|
|
| `IS31FL3737_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | |
|
|
|
| `IS31FL3737_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | |
|
|
|
| `IS31FL3737_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | |
|
|
|
| `IS31FL3737_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | |
|
|
|
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | |
|
|
|
| `IS31FL3737_I2C_ADDRESS_1` | (Required) Address for the first RGB driver | | |
|
|
|
| `IS31FL3737_I2C_ADDRESS_2` | (Optional) Address for the second RGB driver | | |
|
|
@ -290,7 +283,6 @@ Here is an example using 2 drivers. |
|
|
|
#define IS31FL3737_I2C_ADDRESS_1 IS31FL3737_I2C_ADDRESS_GND |
|
|
|
#define IS31FL3737_I2C_ADDRESS_2 IS31FL3737_I2C_ADDRESS_SCL |
|
|
|
|
|
|
|
#define IS31FL3737_DRIVER_COUNT 2 |
|
|
|
#define DRIVER_1_LED_TOTAL 30 |
|
|
|
#define DRIVER_2_LED_TOTAL 36 |
|
|
|
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
|
|
@ -341,7 +333,6 @@ Configure the hardware via your `config.h`: |
|
|
|
|----------|-------------|---------| |
|
|
|
| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | |
|
|
|
| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | |
|
|
|
| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | |
|
|
|
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | |
|
|
|
| `DRIVER_ADDR_1` | (Optional) Address for the first RGB driver | | |
|
|
|
| `DRIVER_ADDR_<N>` | (Required) Address for the additional RGB drivers | | |
|
|
@ -376,7 +367,6 @@ Here is an example using 2 drivers. |
|
|
|
```c |
|
|
|
#define DRIVER_ADDR_2 0b0100001 |
|
|
|
|
|
|
|
#define DRIVER_COUNT 2 |
|
|
|
#define DRIVER_1_LED_TOTAL 66 |
|
|
|
#define DRIVER_2_LED_TOTAL 42 |
|
|
|
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
|
|
@ -486,7 +476,6 @@ You can use up to 2 AW20216S IC's. Do not specify `DRIVER_<N>_xxx` defines for I |
|
|
|
| `AW20216S_EN_PIN_2` | (Optional) MCU pin connected to second RGB driver hardware enable line | | |
|
|
|
| `DRIVER_1_LED_TOTAL` | (Required) How many RGB lights are connected to first RGB driver | | |
|
|
|
| `DRIVER_2_LED_TOTAL` | (Optional) How many RGB lights are connected to second RGB driver | | |
|
|
|
| `AW20216S_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | |
|
|
|
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | | |
|
|
|
| `AW20216S_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 | |
|
|
|
| `AW20216S_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 | |
|
|
@ -502,7 +491,6 @@ Here is an example using 2 drivers. |
|
|
|
#define AW20216S_EN_PIN_1 C13 |
|
|
|
#define AW20216S_EN_PIN_2 C13 |
|
|
|
|
|
|
|
#define AW20216S_DRIVER_COUNT 2 |
|
|
|
#define DRIVER_1_LED_TOTAL 66 |
|
|
|
#define DRIVER_2_LED_TOTAL 32 |
|
|
|
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
|
|
|