* Adding Files for Zodiark * zodiark.h and keymap.c layout corrections * Apply suggestions from code review Applied all suggestions from zvecr. Co-authored-by: Joel Challis <git@zvecr.com> * Applied all suggestions from fauxpark Co-authored-by: Ryan <fauxpark@gmail.com> * Defined matrix driver * Update keymap with GPL2 * Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap * Apply suggestions from code review Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme. Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Added VIA keymap * Corrected VIA Keymap oled.c Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>pull/12141/head
@ -0,0 +1,75 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xF901 | |||
#define PRODUCT_ID 0xF902 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Aleblazer | |||
#define PRODUCT Zodiark | |||
#define NO_ACTION_MACRO | |||
#define SOFT_SERIAL_PIN D3 | |||
#define SERIAL_USE_MULTI_TRANSACTION | |||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 7 | |||
#define DIODE_DIRECTION COL2ROW | |||
#define ENCODERS_PAD_A { D2 } | |||
#define ENCODERS_PAD_B { D4 } | |||
#define ENCODERS_PAD_A_RIGHT { D4 } | |||
#define ENCODERS_PAD_B_RIGHT { D2 } | |||
#define ENCODER_RESOLUTION 3 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { C6, D7, E6, B4, F4 } | |||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
#define RGB_DI_PIN B5 | |||
#ifdef RGBLIGHT_ENABLE | |||
#define RGBLED_NUM 68 | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 34, 34 } | |||
#define RGBLIGHT_LIMIT_VAL 170 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif | |||
#ifdef RGB_MATRIX_ENABLE | |||
#define DRIVER_LED_TOTAL 68 | |||
#define RGB_MATRIX_SPLIT { 34, 34 } | |||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. | |||
#define RGB_MATRIX_KEYPRESSES | |||
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS | |||
#define RGB_MATRIX_HUE_STEP 8 | |||
#define RGB_MATRIX_SAT_STEP 8 | |||
#define RGB_MATRIX_VAL_STEP 8 | |||
#define RGB_MATRIX_SPD_STEP 10 | |||
#endif |
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "zodiark", | |||
"url": "https://github.com/Aleblazer/qmk_firmware/tree/master/keyboards/zodiark", | |||
"maintainer": "Aleblazer", | |||
"width": 19, | |||
"height": 8.48, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"label":"L03", "x":3, "y":0}, {"label":"R03", "x":15, "y":0}, {"label":"L02", "x":2, "y":0.125}, {"label":"L04", "x":4, "y":0.125}, {"label":"R02", "x":14, "y":0.125}, {"label":"R04", "x":16, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"R01", "x":13, "y":0.25}, {"label":"L00", "x":0, "y":0.53}, {"label":"L01", "x":1, "y":0.53}, {"label":"R05", "x":17, "y":0.53}, {"label":"R06", "x":18, "y":0.53}, {"label":"L13", "x":3, "y":1}, {"label":"R13", "x":15, "y":1}, {"label":"L12", "x":2, "y":1.125}, {"label":"L14", "x":4, "y":1.125}, {"label":"R12", "x":14, "y":1.125}, {"label":"R14", "x":16, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"R11", "x":13, "y":1.25}, {"label":"L10", "x":0, "y":1.53}, {"label":"L11", "x":1, "y":1.53}, {"label":"R15", "x":17, "y":1.53}, {"label":"R16", "x":18, "y":1.53}, {"label":"L06", "x":6, "y":1.7000000000000002}, {"label":"R00", "x":12, "y":1.7000000000000002}, {"label":"L23", "x":3, "y":2.0}, {"label":"R23", "x":15, "y":2.0}, {"label":"L22", "x":2, "y":2.125}, {"label":"L24", "x":4, "y":2.125}, {"label":"R22", "x":14, "y":2.125}, {"label":"R24", "x":16, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"R21", "x":13, "y":2.25}, {"label":"L20", "x":0, "y":2.5300000000000002}, {"label":"L21", "x":1, "y":2.5300000000000002}, {"label":"R25", "x":17, "y":2.5300000000000002}, {"label":"R26", "x":18, "y":2.5300000000000002}, {"label":"L16", "x":6, "y":2.7}, {"label":"R10", "x":12, "y":2.7}, {"label":"L33", "x":3, "y":3.0000000000000004}, {"label":"R33", "x":15, "y":3.0000000000000004}, {"label":"L32", "x":2, "y":3.1250000000000004}, {"label":"L34", "x":4, "y":3.1250000000000004}, {"label":"R32", "x":14, "y":3.1250000000000004}, {"label":"R34", "x":16, "y":3.1250000000000004}, {"label":"L35", "x":5, "y":3.2500000000000004}, {"label":"R31", "x":13, "y":3.2500000000000004}, {"label":"L30", "x":0, "y":3.5300000000000002}, {"label":"L31", "x":1, "y":3.5300000000000002}, {"label":"R35", "x":17, "y":3.5300000000000002}, {"label":"R36", "x":18, "y":3.5300000000000002}, {"label":"L43", "x":3, "y":4.0}, {"label":"R43", "x":15, "y":4.0}, {"label":"L42", "x":2, "y":4.125}, {"label":"R44", "x":16, "y":4.125}, {"label":"L44", "x":4, "y":4.13}, {"label":"R42", "x":14, "y":4.13}, {"label":"L40", "x":0, "y":4.53}, {"label":"L41", "x":1, "y":4.53}, {"label":"R45", "x":17, "y":4.53}, {"label":"R46", "x":18, "y":4.53}, {"label":"L26", "x":-0.33, "y":5.13}, {"label":"L36", "x":0.6699999999999999, "y":5.13}, {"label":"L45", "x":-0.83, "y":6.13, "w":1.5}, {"label":"L46", "x":0.67, "y":6.13}, {"label":"R30", "x":-2.1, "y":6.48}, {"label":"R20", "x":-1.1, "y":6.48}, {"label":"R40", "x":-2.1, "y":7.48}, {"label":"R41", "x":-1.1, "y":7.48, "w":1.5}] | |||
} | |||
} | |||
} |
@ -0,0 +1,22 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#ifdef OLED_DRIVER_ENABLE | |||
#define OLED_DISPLAY_128X64 | |||
#define OLED_TIMEOUT 400000 | |||
#endif |
@ -0,0 +1,327 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum sofle_layers { | |||
/* _M_XYZ = Mac Os, _W_XYZ = Win/Linux */ | |||
_QWERTY, | |||
_COLEMAK, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST, | |||
}; | |||
enum custom_keycodes { | |||
KC_QWERTY = SAFE_RANGE, | |||
KC_COLEMAK, | |||
KC_LOWER, | |||
KC_RAISE, | |||
KC_ADJUST, | |||
KC_PRVWD, | |||
KC_NXTWD, | |||
KC_LSTRT, | |||
KC_LEND, | |||
KC_DLINE | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, | |||
KC_ADJUST, KC_A, KC_S, KC_D, KC_F, KC_G, KC_MINS, KC_EQL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_MUTE, RGB_TOG, KC_DEL,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , | |||
KC_LCTL, KC_LALT, KC_LGUI, LALT(KC_TAB), KC_LOWER, KC_SPC, KC_ENT, KC_ENT, KC_SPC, KC_RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT | |||
), | |||
[_LOWER] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12, | |||
KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK, | |||
_______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, | |||
_______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ | |||
), | |||
[_RAISE] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12, | |||
KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK, | |||
_______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, | |||
_______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ | |||
), | |||
[_ADJUST] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_F12, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD | |||
) | |||
}; | |||
#ifdef OLED_DRIVER_ENABLE | |||
static void render_logo(void) { | |||
static const char PROGMEM qmk_logo[] = { | |||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, | |||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, | |||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0 | |||
}; | |||
oled_write_P(qmk_logo, false); | |||
} | |||
static void print_status_narrow(void) { | |||
// Print current mode | |||
oled_write_P(PSTR("\n\n"), false); | |||
oled_write_ln_P(PSTR("MODE"), false); | |||
oled_write_ln_P(PSTR(""), false); | |||
if (keymap_config.swap_lctl_lgui) { | |||
oled_write_ln_P(PSTR("MAC"), false); | |||
} else { | |||
oled_write_ln_P(PSTR("WIN"), false); | |||
} | |||
switch (get_highest_layer(default_layer_state)) { | |||
case _QWERTY: | |||
oled_write_ln_P(PSTR("Qwrt"), false); | |||
break; | |||
case _COLEMAK: | |||
oled_write_ln_P(PSTR("Clmk"), false); | |||
break; | |||
default: | |||
oled_write_P(PSTR("Undef"), false); | |||
} | |||
oled_write_P(PSTR("\n\n"), false); | |||
// Print current layer | |||
oled_write_ln_P(PSTR("LAYER"), false); | |||
switch (get_highest_layer(layer_state)) { | |||
case _COLEMAK: | |||
case _QWERTY: | |||
oled_write_P(PSTR("Base\n"), false); | |||
break; | |||
case _RAISE: | |||
oled_write_P(PSTR("Raise"), false); | |||
break; | |||
case _LOWER: | |||
oled_write_P(PSTR("Lower"), false); | |||
break; | |||
case _ADJUST: | |||
oled_write_P(PSTR("Adj\n"), false); | |||
break; | |||
default: | |||
oled_write_ln_P(PSTR("Undef"), false); | |||
} | |||
oled_write_P(PSTR("\n\n"), false); | |||
led_t led_usb_state = host_keyboard_led_state(); | |||
oled_write_ln_P(PSTR("CPSLK"), led_usb_state.caps_lock); | |||
} | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { | |||
if (is_keyboard_master()) { | |||
return OLED_ROTATION_90; | |||
} | |||
return rotation; | |||
} | |||
void oled_task_user(void) { | |||
if (is_keyboard_master()) { | |||
print_status_narrow(); | |||
} else { | |||
render_logo(); | |||
} | |||
} | |||
#endif | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case KC_QWERTY: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
return false; | |||
case KC_COLEMAK: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_COLEMAK); | |||
} | |||
return false; | |||
case KC_LOWER: | |||
if (record->event.pressed) { | |||
layer_on(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
case KC_RAISE: | |||
if (record->event.pressed) { | |||
layer_on(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
case KC_ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
return false; | |||
case KC_PRVWD: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
register_mods(mod_config(MOD_LALT)); | |||
register_code(KC_LEFT); | |||
} else { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_LEFT); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LALT)); | |||
unregister_code(KC_LEFT); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_LEFT); | |||
} | |||
} | |||
break; | |||
case KC_NXTWD: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
register_mods(mod_config(MOD_LALT)); | |||
register_code(KC_RIGHT); | |||
} else { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_RIGHT); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LALT)); | |||
unregister_code(KC_RIGHT); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_RIGHT); | |||
} | |||
} | |||
break; | |||
case KC_LSTRT: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
//CMD-arrow on Mac, but we have CTL and GUI swapped | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_LEFT); | |||
} else { | |||
register_code(KC_HOME); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_LEFT); | |||
} else { | |||
unregister_code(KC_HOME); | |||
} | |||
} | |||
break; | |||
case KC_LEND: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
//CMD-arrow on Mac, but we have CTL and GUI swapped | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_RIGHT); | |||
} else { | |||
register_code(KC_END); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_RIGHT); | |||
} else { | |||
unregister_code(KC_END); | |||
} | |||
} | |||
break; | |||
case KC_DLINE: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_BSPC); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_BSPC); | |||
} | |||
break; | |||
case KC_COPY: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_C); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_C); | |||
} | |||
return false; | |||
case KC_PASTE: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_V); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_V); | |||
} | |||
return false; | |||
case KC_CUT: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_X); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_X); | |||
} | |||
return false; | |||
break; | |||
case KC_UNDO: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_Z); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_Z); | |||
} | |||
return false; | |||
} | |||
return true; | |||
} | |||
#ifdef ENCODER_ENABLE | |||
void encoder_update_user(uint8_t index, bool clockwise) { | |||
if (index == 0) { | |||
if (clockwise) { | |||
tap_code(KC_VOLU); | |||
} else { | |||
tap_code(KC_VOLD); | |||
} | |||
} else if (index == 1) { | |||
if (clockwise) { | |||
rgblight_step(); | |||
} else { | |||
rgblight_step_reverse(); | |||
} | |||
} | |||
} | |||
#endif |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = yes |
@ -0,0 +1,22 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#ifdef OLED_DRIVER_ENABLE | |||
#define OLED_DISPLAY_128X32 | |||
#define OLED_TIMEOUT 400000 | |||
#endif |
@ -0,0 +1,330 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum sofle_layers { | |||
/* _M_XYZ = Mac Os, _W_XYZ = Win/Linux */ | |||
_QWERTY, | |||
_COLEMAK, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST, | |||
}; | |||
enum custom_keycodes { | |||
KC_QWERTY = SAFE_RANGE, | |||
KC_COLEMAK, | |||
KC_LOWER, | |||
KC_RAISE, | |||
KC_ADJUST, | |||
KC_PRVWD, | |||
KC_NXTWD, | |||
KC_LSTRT, | |||
KC_LEND, | |||
KC_DLINE | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, | |||
KC_ADJUST, KC_A, KC_S, KC_D, KC_F, KC_G, KC_MINS, KC_EQL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_MUTE, RGB_TOG, KC_DEL,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , | |||
KC_LCTL, KC_LALT, KC_LGUI, LALT(KC_TAB), KC_LOWER, KC_SPC, KC_ENT, KC_ENT, KC_SPC, KC_RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT | |||
), | |||
[_LOWER] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12, | |||
KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK, | |||
_______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, | |||
_______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ | |||
), | |||
[_RAISE] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12, | |||
KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK, | |||
_______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, | |||
_______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ | |||
), | |||
[_ADJUST] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_F12, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD | |||
) | |||
}; | |||
#ifdef OLED_DRIVER_ENABLE | |||
static void render_logo(void) { | |||
static const char PROGMEM qmk_logo[] = { | |||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, | |||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, | |||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0 | |||
}; | |||
oled_write_P(qmk_logo, false); | |||
} | |||
static void print_status_narrow(void) { | |||
// Print current mode | |||
oled_write_P(PSTR("\n\n"), false); | |||
oled_write_ln_P(PSTR("MODE"), false); | |||
oled_write_ln_P(PSTR(""), false); | |||
if (keymap_config.swap_lctl_lgui) { | |||
oled_write_ln_P(PSTR("MAC"), false); | |||
} else { | |||
oled_write_ln_P(PSTR("WIN"), false); | |||
} | |||
switch (get_highest_layer(default_layer_state)) { | |||
case _QWERTY: | |||
oled_write_ln_P(PSTR("Qwrt"), false); | |||
break; | |||
case _COLEMAK: | |||
oled_write_ln_P(PSTR("Clmk"), false); | |||
break; | |||
default: | |||
oled_write_P(PSTR("Undef"), false); | |||
} | |||
oled_write_P(PSTR("\n\n"), false); | |||
// Print current layer | |||
oled_write_ln_P(PSTR("LAYER"), false); | |||
switch (get_highest_layer(layer_state)) { | |||
case _COLEMAK: | |||
case _QWERTY: | |||
oled_write_P(PSTR("Base\n"), false); | |||
break; | |||
case _RAISE: | |||
oled_write_P(PSTR("Raise"), false); | |||
break; | |||
case _LOWER: | |||
oled_write_P(PSTR("Lower"), false); | |||
break; | |||
case _ADJUST: | |||
oled_write_P(PSTR("Adj\n"), false); | |||
break; | |||
default: | |||
oled_write_ln_P(PSTR("Undef"), false); | |||
} | |||
oled_write_P(PSTR("\n\n"), false); | |||
led_t led_usb_state = host_keyboard_led_state(); | |||
oled_write_ln_P(PSTR("CPSLK"), led_usb_state.caps_lock); | |||
} | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { | |||
if (is_keyboard_master()) { | |||
return OLED_ROTATION_90; | |||
} | |||
return rotation; | |||
} | |||
void oled_task_user(void) { | |||
if (is_keyboard_master()) { | |||
print_status_narrow(); | |||
} else { | |||
render_logo(); | |||
} | |||
} | |||
#endif | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case KC_QWERTY: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
return false; | |||
case KC_COLEMAK: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_COLEMAK); | |||
} | |||
return false; | |||
case KC_LOWER: | |||
if (record->event.pressed) { | |||
layer_on(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
case KC_RAISE: | |||
if (record->event.pressed) { | |||
layer_on(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
case KC_ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
return false; | |||
case KC_PRVWD: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
register_mods(mod_config(MOD_LALT)); | |||
register_code(KC_LEFT); | |||
} else { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_LEFT); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LALT)); | |||
unregister_code(KC_LEFT); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_LEFT); | |||
} | |||
} | |||
break; | |||
case KC_NXTWD: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
register_mods(mod_config(MOD_LALT)); | |||
register_code(KC_RIGHT); | |||
} else { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_RIGHT); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LALT)); | |||
unregister_code(KC_RIGHT); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_RIGHT); | |||
} | |||
} | |||
break; | |||
case KC_LSTRT: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
//CMD-arrow on Mac, but we have CTL and GUI swapped | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_LEFT); | |||
} else { | |||
register_code(KC_HOME); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_LEFT); | |||
} else { | |||
unregister_code(KC_HOME); | |||
} | |||
} | |||
break; | |||
case KC_LEND: | |||
if (record->event.pressed) { | |||
if (keymap_config.swap_lctl_lgui) { | |||
//CMD-arrow on Mac, but we have CTL and GUI swapped | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_RIGHT); | |||
} else { | |||
register_code(KC_END); | |||
} | |||
} else { | |||
if (keymap_config.swap_lctl_lgui) { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_RIGHT); | |||
} else { | |||
unregister_code(KC_END); | |||
} | |||
} | |||
break; | |||
case KC_DLINE: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_BSPC); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_BSPC); | |||
} | |||
break; | |||
case KC_COPY: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_C); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_C); | |||
} | |||
return false; | |||
case KC_PASTE: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_V); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_V); | |||
} | |||
return false; | |||
case KC_CUT: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_X); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_X); | |||
} | |||
return false; | |||
break; | |||
case KC_UNDO: | |||
if (record->event.pressed) { | |||
register_mods(mod_config(MOD_LCTL)); | |||
register_code(KC_Z); | |||
} else { | |||
unregister_mods(mod_config(MOD_LCTL)); | |||
unregister_code(KC_Z); | |||
} | |||
return false; | |||
} | |||
return true; | |||
} | |||
#ifdef ENCODER_ENABLE | |||
void encoder_update_user(uint8_t index, bool clockwise) { | |||
if (index == 0) { | |||
if (clockwise) { | |||
tap_code(KC_VOLU); | |||
} else { | |||
tap_code(KC_VOLD); | |||
} | |||
} else if (index == 1) { | |||
if (clockwise) { | |||
rgblight_step(); | |||
} else { | |||
rgblight_step_reverse(); | |||
} | |||
} | |||
} | |||
#endif |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = yes |
@ -0,0 +1,22 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#ifdef OLED_DRIVER_ENABLE | |||
#define OLED_DISPLAY_128X64 | |||
#define OLED_TIMEOUT 400000 | |||
#endif |
@ -0,0 +1,35 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
//Setting up what encoder rotation does. If your encoder can be pressed as a button, that function can be set in Via. | |||
#ifdef ENCODER_ENABLE | |||
void encoder_update_user(uint8_t index, bool clockwise) { | |||
if (index == 0) { | |||
if (clockwise) { | |||
tap_code(KC_VOLU); | |||
} else { | |||
tap_code(KC_VOLD); | |||
} | |||
} else if (index == 1) { | |||
if (clockwise) { | |||
tap_code(KC_PGDOWN); | |||
} else { | |||
tap_code(KC_PGUP); | |||
} | |||
} | |||
} | |||
#endif |
@ -0,0 +1,52 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#include "oled.c" | |||
#include "encoder.c" | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, | |||
MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_MINS, KC_EQL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_MUTE, RGB_TOG, KC_DEL,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , | |||
KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(1), KC_SPC, KC_ENT, KC_ENT, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12, | |||
KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK, | |||
_______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, | |||
_______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ | |||
), | |||
[2] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
KC_PSLS, KC_P7, KC_P8, KC_P9, KC_NLCK, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_F12, | |||
KC_CAPS, KC_P4, KC_P5, KC_P6, KC_NLCK, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_NLCK, | |||
_______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, | |||
_______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ | |||
), | |||
[3] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_F12, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD | |||
) | |||
}; |
@ -0,0 +1,78 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifdef OLED_DRIVER_ENABLE | |||
static void render_logo(void) { | |||
static const char PROGMEM qmk_logo[] = { | |||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, | |||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, | |||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0 | |||
}; | |||
oled_write_P(qmk_logo, false); | |||
} | |||
static void print_status_narrow(void) { | |||
// Print current mode | |||
oled_write_P(PSTR("\n\n"), false); | |||
switch (get_highest_layer(layer_state)) { | |||
case 0: | |||
oled_write_ln_P(PSTR("Qwrt"), false); | |||
break; | |||
default: | |||
oled_write_P(PSTR("Mod\n"), false); | |||
break; | |||
} | |||
oled_write_P(PSTR("\n\n"), false); | |||
// Print current layer | |||
oled_write_ln_P(PSTR("LAYER"), false); | |||
switch (get_highest_layer(layer_state)) { | |||
case 0: | |||
oled_write_P(PSTR("Base\n"), false); | |||
break; | |||
case 1: | |||
oled_write_P(PSTR("Raise"), false); | |||
break; | |||
case 2: | |||
oled_write_P(PSTR("Lower"), false); | |||
break; | |||
case 3: | |||
oled_write_P(PSTR("Adjust"), false); | |||
break; | |||
default: | |||
oled_write_ln_P(PSTR("Undef"), false); | |||
} | |||
oled_write_P(PSTR("\n\n"), false); | |||
led_t led_usb_state = host_keyboard_led_state(); | |||
oled_write_ln_P(PSTR("CPSLK"), led_usb_state.caps_lock); | |||
} | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { | |||
if (is_keyboard_master()) { | |||
return OLED_ROTATION_90; | |||
} | |||
return rotation; | |||
} | |||
void oled_task_user(void) { | |||
if (is_keyboard_master()) { | |||
print_status_narrow(); | |||
} else { | |||
render_logo(); | |||
} | |||
} | |||
#endif |
@ -0,0 +1,2 @@ | |||
RGBLIGHT_ENABLE = yes | |||
VIA_ENABLE = yes |
@ -0,0 +1,23 @@ | |||
# Zodiark Keyboard | |||
![Zodiark Split](https://i.imgur.com/49O8aowl.jpg) | |||
A split keyboard with 5x7 including a thumbcluster, encoders on each side, per key RGB, and 2x I2C headers per side, supporiting 1.3"/.96" 128x64 OLEDs (the 1.3" is an SSH1106 OLED, refer to QMK documentation for limitations), .91" 128x32 OLEDs. | |||
* Keyboard Maintainer: [Aleblazer](https://github.com/Aleblazer/), [Discord Link](https://discord.gg/BCSbXwskVt) | |||
* Hardware Supported: Pro Micro and derivatives | |||
* Hardware Availability: Pending Group Buy - [Discord Link](https://discord.gg/BCSbXwskVt) | |||
Make example for this keyboard (after setting up your build environment): | |||
make zodiark:default | |||
Flashing example for this keyboard: | |||
make zodiark:default:flash | |||
Remove TRRS cable from halves, plug into one side, press reset button when asked. Repeat process on the other side. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
Credit to Sofle and Josef Adamcik <josef.adamcik@gmail.com> for OLED and layer code. |
@ -0,0 +1,27 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
OLED_DRIVER_ENABLE = yes # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C | |||
ENCODER_ENABLE = yes | |||
SPLIT_KEYBOARD = yes | |||
LTO_ENABLE = yes | |||
RGB_MATRIX_DRIVER = WS2812 |
@ -0,0 +1,54 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "zodiark.h" | |||
#ifdef RGB_MATRIX_ENABLE | |||
led_config_t g_led_config = { { | |||
// Key Matrix to LED Index | |||
// Left Hand | |||
{ 5, 4, 3, 2, 1, 0, 12 }, | |||
{ 6, 7, 8, 9, 10, 11, 13 }, | |||
{ 19, 18, 17, 16, 15, 14, 26 }, | |||
{ 20, 21, 22, 23, 24, 25, NO_LED }, | |||
{ 33, 32, 31, 30, 29, 28, 27}, | |||
// Right Hand | |||
{ 39, 38, 37, 36, 35, 34, 46 }, | |||
{ 40, 41, 42, 43, 44, 45, 47 }, | |||
{ 53, 52, 51, 50, 49, 48, 60 }, | |||
{ 54, 55, 56, 57, 58, 59, NO_LED }, | |||
{ 67, 66, 65, 64, 63, 62, 61 }, | |||
}, { | |||
// LED Index to Physical Position | |||
// Left Hand | |||
{ 93, 0 }, { 74, 0 }, { 56, 0 }, { 37, 0 }, { 19, 0 }, { 0, 0 }, { 0, 16 }, | |||
{ 19, 16 }, { 37, 16 }, { 56, 16 }, { 74, 16 }, { 93, 16 }, { 112, 24 }, { 112, 40 }, | |||
{ 93, 32 }, { 74, 32 }, { 56, 32 }, { 37, 32 }, { 19, 32 }, { 0, 32 }, { 0, 48 }, | |||
{ 19, 48 }, { 37, 48 }, { 56, 48 }, { 74, 48 }, { 93, 48 }, { 112, 52 }, | |||
{ 112, 64 }, { 93, 64 }, { 74, 64 }, { 56, 64 }, { 37, 64 }, { 19, 64 }, { 0, 64 }, | |||
// Right Hand | |||
{ 132, 0 }, { 150, 0 }, { 169, 0 }, { 187, 0 }, { 206, 0 }, { 224, 0 }, { 224, 16 }, | |||
{ 206, 16 }, { 187, 16 }, { 169, 16 }, { 150, 16 }, { 132, 16 }, { 113, 24 }, { 113, 40 }, | |||
{ 132, 32 }, { 150, 32 }, { 169, 32 }, { 187, 32 }, { 206, 32 }, { 224, 32 }, { 224, 48 }, | |||
{ 206, 48 }, { 187, 48 }, { 169, 48 }, { 150, 48 }, { 132, 48 }, { 113, 52 }, | |||
{ 113, 64 }, { 132, 64 }, { 150, 64 }, { 169, 64 }, { 187, 64 }, { 206, 64 }, { 224, 64 }, | |||
}, { | |||
// LED Index to Flag | |||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 | |||
} }; | |||
#endif |
@ -0,0 +1,38 @@ | |||
/* | |||
Copyright 2021 Spencer Deven <splitlogicdesign@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 3 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L06, R00, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L16, R10, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L26, L36, R30, R20, R31, R32, R33, R34, R35, R36, \ | |||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||
{ L40, L41, L42, L43, L44, L45, L46 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ R36, R35, R34, R33, R32, R31, R30 }, \ | |||
{ R46, R45, R44, R43, R42, R41, R40 } \ | |||
} |