* add runner3680 * Remove unnecessary codepull/6091/head
@ -0,0 +1 @@ | |||||
#include "3x6.h" |
@ -0,0 +1,19 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05 }, \ | |||||
{ L10, L11, L12, L13, L14, L15 }, \ | |||||
{ L20, L21, L22, L23, L24, L25 }, \ | |||||
{ R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R25, R24, R23, R22, R21, R20 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7 } | |||||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 70 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,86 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-----------------------------------------. ,-----------------------------------------. | |||||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | | |||||
* `-----------------------------------------' `-----------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS | |||||
), | |||||
/* Adjust | |||||
* ,-----------------------------------------. ,-----------------------------------------. | |||||
* | |RGBRST| RESET| | | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | TOG | HUI | SAI | VAI | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | MOD | HUD | SAD | VAD | | | | | | | | | | |||||
* `-----------------------------------------' `-----------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "3x7.h" |
@ -0,0 +1,19 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R26, R25, R24, R23, R22, R21, R20 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7 } | |||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 70 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,86 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,------------------------------------------------. ,------------------------------------------------. | |||||
* | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | | |||||
* `------------------------------------------------' `------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, | |||||
KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP | |||||
), | |||||
/* Adjust | |||||
* ,------------------------------------------------. ,------------------------------------------------. | |||||
* | | |RGBRST| RESET| | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | TOG | HUI | SAI | VAI | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | MOD | HUD | SAD | VAD | | | | | | | | | | | |||||
* `------------------------------------------------' `------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "3x8.h" |
@ -0,0 +1,19 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||||
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||||
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \ | |||||
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R27, R26, R25, R24, R23, R22, R21, R20 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7 } | |||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 80 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,88 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||||
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, | |||||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT | |||||
), | |||||
/* Adjust | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | | | | | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "4x6.h" |
@ -0,0 +1,22 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05 }, \ | |||||
{ L10, L11, L12, L13, L14, L15 }, \ | |||||
{ L20, L21, L22, L23, L24, L25 }, \ | |||||
{ L30, L31, L32, L33, L34, L35 }, \ | |||||
{ R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R35, R34, R33, R32, R31, R30 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 70 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,92 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-----------------------------------------. ,-----------------------------------------. | |||||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | | |||||
* `-----------------------------------------' `-----------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, | |||||
KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT | |||||
), | |||||
/* Adjust | |||||
* ,-----------------------------------------. ,-----------------------------------------. | |||||
* | |RGBRST| RESET| | | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | TOG | HUI | SAI | VAI | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | MOD | HUD | SAD | VAD | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | |||||
* `-----------------------------------------' `-----------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "4x7.h" |
@ -0,0 +1,22 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R36, R35, R34, R33, R32, R31, R30 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 70 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,92 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,------------------------------------------------. ,------------------------------------------------. | |||||
* | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | | |||||
* `------------------------------------------------' `------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, | |||||
KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, | |||||
KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN | |||||
), | |||||
/* Adjust | |||||
* ,------------------------------------------------. ,------------------------------------------------. | |||||
* | | |RGBRST| RESET| | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | TOG | HUI | SAI | VAI | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | MOD | HUD | SAD | VAD | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | | | |||||
* `------------------------------------------------' `------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "4x8.h" |
@ -0,0 +1,22 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||||
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||||
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \ | |||||
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \ | |||||
{ L30, L31, L32, L33, L34, L35, L36, L37 }, \ | |||||
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R27, R26, R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R37, R36, R35, R34, R33, R32, R31, R30 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 80 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,92 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right| | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||||
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, | |||||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, | |||||
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
/* Adjust | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | | | | | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "5x6.h" |
@ -0,0 +1,25 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05 }, \ | |||||
{ L10, L11, L12, L13, L14, L15 }, \ | |||||
{ L20, L21, L22, L23, L24, L25 }, \ | |||||
{ L30, L31, L32, L33, L34, L35 }, \ | |||||
{ L40, L41, L42, L43, L44, L45 }, \ | |||||
{ R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R35, R34, R33, R32, R31, R30 }, \ | |||||
{ R45, R44, R43, R42, R41, R40 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 70 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,98 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-----------------------------------------. ,-----------------------------------------. | |||||
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | | |||||
* `-----------------------------------------' `-----------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, | |||||
KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT | |||||
), | |||||
/* Adjust | |||||
* ,-----------------------------------------. ,-----------------------------------------. | |||||
* | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | |RGBRST| RESET| | | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | TOG | HUI | SAI | VAI | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | MOD | HUD | SAD | VAD | | | | | | | | | | |||||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | |||||
* `-----------------------------------------' `-----------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( \ | |||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, | |||||
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "5x7.h" |
@ -0,0 +1,25 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ | |||||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||||
{ L40, L41, L42, L43, L44, L45, L46 }, \ | |||||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R36, R35, R34, R33, R32, R31, R30 }, \ | |||||
{ R46, R45, R44, R43, R42, R41, R40 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 70 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,98 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,------------------------------------------------. ,------------------------------------------------. | |||||
* | F1 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F2 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F3 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F4 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Shift| | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | F5 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | | |||||
* `------------------------------------------------' `------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( \ | |||||
KC_F1, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ | |||||
KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \ | |||||
KC_F3, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ | |||||
KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_RSFT, \ | |||||
KC_F5, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, ADJUST, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \ | |||||
), | |||||
/* Adjust | |||||
* ,------------------------------------------------. ,------------------------------------------------. | |||||
* | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | |RGBRST| RESET| | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | TOG | HUI | SAI | VAI | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | MOD | HUD | SAD | VAD | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | | | |||||
* `------------------------------------------------' `------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( \ | |||||
_______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ | |||||
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||||
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||||
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||||
#include "5x8.h" |
@ -0,0 +1,25 @@ | |||||
#pragma once | |||||
#include "runner3680.h" | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||||
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||||
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \ | |||||
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ | |||||
L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \ | |||||
{ L30, L31, L32, L33, L34, L35, L36, L37 }, \ | |||||
{ L40, L41, L42, L43, L44, L45, L46, L47 }, \ | |||||
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R27, R26, R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R37, R36, R35, R34, R33, R32, R31, R30 }, \ | |||||
{ R47, R46, R45, R44, R43, R42, R41, R40 } \ | |||||
} |
@ -0,0 +1,67 @@ | |||||
/* Copyright 2019 omkbd | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0005 | |||||
#define MANUFACTURER Omkbd | |||||
#define PRODUCT runner3680 | |||||
#define DESCRIPTION A split keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 } | |||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||||
/* define tapping term */ | |||||
#define TAPPING_TERM 120 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 80 | |||||
#define RGBLIGHT_SPLIT | |||||
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs | |||||
#define SOFT_SERIAL_PIN D2 | |||||
#define SELECT_SOFT_SERIAL_SPEED 1 | |||||
/*Sets the protocol speed when using serial communication*/ | |||||
//Speeds: | |||||
//0: about 189kbps (Experimental only) | |||||
//1: about 137kbps (default) | |||||
//2: about 75kbps | |||||
//3: about 39kbps | |||||
//4: about 26kbps | |||||
//5: about 20kbps |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,99 @@ | |||||
#include QMK_KEYBOARD_H | |||||
#include "keymap_jp.h" | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | F1 | F2 | EISU | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | ^ | \ | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | @ | [ | Bksp | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | : | ; | ] | Enter| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F9 | F10 | Ctrl | GUI | Alt | MHEN | Del | Space| | Enter| Bksp | HENK |Adjust| F10 | Left | Down | Right| | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
RGBRST , RGB_TOG, JP_ZHTG, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, JP_YEN, | |||||
RGB_MOD, RGB_SAI, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_BSPC, | |||||
RGB_SAI, RGB_SAD, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, JP_RBRC, KC_ENT, | |||||
RGB_VAI, RGB_VAD, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT, | |||||
_______, _______, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_HENK, ADJUST, KC_F10, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
/* Adjust | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | | | | | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1,9 @@ | |||||
#pragma once | |||||
//#define USE_MATRIX_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS |
@ -0,0 +1,98 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#ifdef RGBLIGHT_ENABLE | |||||
//Following line allows macro to read current RGB settings | |||||
extern rgblight_config_t rgblight_config; | |||||
rgblight_config_t RGB_current_config; | |||||
#endif | |||||
enum layer_number { | |||||
_QWERTY = 0, | |||||
_ADJUST | |||||
}; | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
RGBRST | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define EISU LALT(KC_GRV) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* QWERTY | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | F1 | F2 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = | Del | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift| | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right| | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_QWERTY] = LAYOUT( | |||||
KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, | |||||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||||
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, | |||||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, | |||||
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
/* Adjust | |||||
* ,-------------------------------------------------------. ,--------------------------------------------------------. | |||||
* | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | |RGBRST| RESET| | | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | | | |||||
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------| | |||||
* | | | | | | | | | | | | | | | | | | | |||||
* `-------------------------------------------------------' `-------------------------------------------------------' | |||||
*/ | |||||
[_ADJUST] = LAYOUT( | |||||
_______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||||
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
print("mode just switched to qwerty and this is a huge string\n"); | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
break; | |||||
case RGBRST: | |||||
#ifdef RGBLIGHT_ENABLE | |||||
if (record->event.pressed) { | |||||
eeconfig_update_rgblight_default(); | |||||
rgblight_enable(); | |||||
RGB_current_config = rgblight_config; | |||||
} | |||||
#endif | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. |
@ -0,0 +1,3 @@ | |||||
#pragma once | |||||
#include "config_common.h" |
@ -0,0 +1,15 @@ | |||||
# runner3680 | |||||
![runner3680](https://github.com/omkbd/Runner3680/blob/master/Picture/Runner3680.jpg) | |||||
A split ortholinear keyboard. Each half is a 5x8 arrangement, with breakable pieces to allow the number of rows to be customized between 3 to 5, and the number of columns to be between 6 to 8. | |||||
Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd) | |||||
Hardware Supported: Runner3680, Pro Micro ATmega32u4 | |||||
Hardware Availability: Order your own [yourself](https://github.com/omkbd/Runner3680) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make runner3680/5x8:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,60 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
F_CPU = 16000000 | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Bootloader selection | |||||
# Teensy halfkay | |||||
# Pro Micro caterina | |||||
# Atmel DFU atmel-dfu | |||||
# LUFA DFU lufa-dfu | |||||
# QMK DFU qmk-dfu | |||||
# atmega32a bootloadHID | |||||
BOOTLOADER = caterina | |||||
# If you don't know the bootloader type, then you can specify the | |||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||||
SPLIT_KEYBOARD = yes # Enables split keyboard support | |||||
DEFAULT_FOLDER = runner3680/5x8 |
@ -0,0 +1 @@ | |||||
#include "runner3680.h" |
@ -0,0 +1,39 @@ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#ifdef KEYBOARD_runner3680_5x8 | |||||
#include "5x8.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_5x7 | |||||
#include "5x7.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_5x6 | |||||
#include "5x6.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_4x8 | |||||
#include "4x8.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_4x7 | |||||
#include "4x7.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_4x6 | |||||
#include "4x6.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_3x8 | |||||
#include "3x8.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_3x7 | |||||
#include "3x7.h" | |||||
#endif | |||||
#ifdef KEYBOARD_runner3680_3x6 | |||||
#include "3x6.h" | |||||
#endif |