From 87291437bd5afccb44677db3ebcf0c284128e990 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 3 Dec 2020 13:04:28 +1100 Subject: [PATCH] Add board specific to Proton-C, with usual defaults turned on. (#10976) - Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same output --- build_keyboard.mk | 4 +- docs/ja/proton_c_conversion.md | 1 + docs/proton_c_conversion.md | 1 + .../1upkeyboards/sweet16/v2/proton_c/rules.mk | 1 + keyboards/acheron/shark/rules.mk | 1 + .../atreus/keymaps/ridingqwerty/rules.mk | 1 + keyboards/boston_meetup/2019/rules.mk | 1 + keyboards/c39/keymaps/drashna/rules.mk | 1 + keyboards/ckeys/thedora/rules.mk | 1 + keyboards/clueboard/60/rules.mk | 1 + keyboards/clueboard/66/rev4/rules.mk | 1 + keyboards/clueboard/66_hotswap/gen1/rules.mk | 1 + keyboards/clueboard/california/rules.mk | 1 + keyboards/dztech/dz60rgb/v1/rules.mk | 1 + keyboards/dztech/dz60rgb_ansi/v1/rules.mk | 1 + keyboards/dztech/dz60rgb_wkl/v1/rules.mk | 1 + keyboards/dztech/dz65rgb/v1/rules.mk | 1 + keyboards/hadron/ver3/rules.mk | 1 + keyboards/handwired/co60/rev6/rules.mk | 1 + keyboards/handwired/co60/rev7/rules.mk | 1 + keyboards/handwired/d48/rules.mk | 1 + keyboards/handwired/ddg_56/rules.mk | 1 + keyboards/handwired/floorboard/rules.mk | 1 + keyboards/handwired/onekey/proton_c/rules.mk | 1 + keyboards/handwired/onekey/pytest/rules.mk | 1 + keyboards/handwired/selene/rules.mk | 1 + keyboards/handwired/sick_pad/rules.mk | 1 + keyboards/handwired/steamvan/rev1/rules.mk | 1 + keyboards/handwired/wulkan/rules.mk | 1 + keyboards/hs60/v2/ansi/rules.mk | 1 + keyboards/hs60/v2/hhkb/rules.mk | 1 + keyboards/hs60/v2/iso/rules.mk | 1 + keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk | 1 + keyboards/kv/revt/rules.mk | 1 + keyboards/mechlovin/adelais/rules.mk | 1 + keyboards/mechlovin/hannah60rgb/rules.mk | 1 + keyboards/mechlovin/hannah65/rules.mk | 1 + keyboards/mechlovin/infinity87/rules.mk | 1 + keyboards/mechlovin/infinity88/rules.mk | 1 + keyboards/melgeek/mj61/rev1/rules.mk | 1 + keyboards/melgeek/mj63/rev1/rules.mk | 1 + keyboards/melgeek/mj64/rev1/rules.mk | 1 + keyboards/melgeek/mj64/rev2/rules.mk | 1 + keyboards/melgeek/mojo75/rev1/rules.mk | 1 + keyboards/melgeek/z70ultra/rev1/rules.mk | 1 + keyboards/moonlander/rules.mk | 1 + keyboards/nebula68/rules.mk | 1 + keyboards/nk65/rules.mk | 1 + keyboards/nk87/rules.mk | 1 + keyboards/planck/ez/rules.mk | 1 + keyboards/planck/rev6/rules.mk | 1 + keyboards/preonic/rev3/rules.mk | 1 + keyboards/rgbkb/pan/rev1/proton_c/rules.mk | 1 + keyboards/yugo_m/model_m_101/rules.mk | 1 + .../GENERIC_STM32_F303XC/configs/mcuconf.h | 22 +- platforms/chibios/QMK_PROTON_C/board/board.mk | 9 + .../chibios/QMK_PROTON_C/configs/board.h | 37 + .../QMK_PROTON_C/configs/bootloader_defs.h | 7 + .../chibios/QMK_PROTON_C/configs/chconf.h | 714 ++++++++++++++++++ .../chibios/QMK_PROTON_C/configs/config.h | 20 + .../chibios/QMK_PROTON_C/configs/halconf.h | 525 +++++++++++++ .../chibios/QMK_PROTON_C/configs/mcuconf.h | 273 +++++++ .../convert_to_proton_c.mk} | 7 +- platforms/chibios/common/configs/halconf.h | 2 +- tmk_core/chibios.mk | 3 + 65 files changed, 1659 insertions(+), 17 deletions(-) create mode 100644 platforms/chibios/QMK_PROTON_C/board/board.mk create mode 100644 platforms/chibios/QMK_PROTON_C/configs/board.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/chconf.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/config.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/halconf.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/mcuconf.h rename platforms/chibios/{GENERIC_STM32_F303XC/configs/proton_c.mk => QMK_PROTON_C/convert_to_proton_c.mk} (64%) diff --git a/build_keyboard.mk b/build_keyboard.mk index e87dcb8f22c..8d018f2e3c6 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -136,9 +136,7 @@ ifeq ($(strip $(CTPC)), yes) endif ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) - TARGET := $(TARGET)_proton_c - include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk - OPT_DEFS += -DCONVERT_TO_PROTON_C + include platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk endif ifneq ($(FORCE_LAYOUT),) diff --git a/docs/ja/proton_c_conversion.md b/docs/ja/proton_c_conversion.md index 6e4f7dcb663..e7c07413ce5 100644 --- a/docs/ja/proton_c_conversion.md +++ b/docs/ja/proton_c_conversion.md @@ -51,6 +51,7 @@ Proton C には1つのオンボード LED(C13)しかなく、デフォルトで ``` MCU = STM32F303 +BOARD = QMK_PROTON_C ``` 次の変数が存在する場合は削除します。 diff --git a/docs/proton_c_conversion.md b/docs/proton_c_conversion.md index 1b5e496e74a..47511e1b1e0 100644 --- a/docs/proton_c_conversion.md +++ b/docs/proton_c_conversion.md @@ -44,6 +44,7 @@ To use the Proton C natively, without having to specify `CTPC=yes`, you need to ``` MCU = STM32F303 +BOARD = QMK_PROTON_C ``` Remove these variables if they exist: diff --git a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk index dedcf043af6..6fb15f5a832 100644 --- a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk +++ b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C ## Features CONSOLE_ENABLE = yes diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 1bd963c8172..214c995ae90 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/atreus/keymaps/ridingqwerty/rules.mk b/keyboards/atreus/keymaps/ridingqwerty/rules.mk index 5c89d5481d6..ebf83f02e8a 100644 --- a/keyboards/atreus/keymaps/ridingqwerty/rules.mk +++ b/keyboards/atreus/keymaps/ridingqwerty/rules.mk @@ -1,4 +1,5 @@ MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/boston_meetup/2019/rules.mk b/keyboards/boston_meetup/2019/rules.mk index aa35ba75394..9076d9ab4d8 100644 --- a/keyboards/boston_meetup/2019/rules.mk +++ b/keyboards/boston_meetup/2019/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk index 6ebd15a1803..09c29f0e8f2 100644 --- a/keyboards/c39/keymaps/drashna/rules.mk +++ b/keyboards/c39/keymaps/drashna/rules.mk @@ -1,4 +1,5 @@ MCU = STM32F303 +BOARD = QMK_PROTON_C BOOTLOADER = BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) diff --git a/keyboards/ckeys/thedora/rules.mk b/keyboards/ckeys/thedora/rules.mk index 92665ffb6d6..8394b1a6cc9 100755 --- a/keyboards/ckeys/thedora/rules.mk +++ b/keyboards/ckeys/thedora/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/clueboard/60/rules.mk b/keyboards/clueboard/60/rules.mk index a9151b87d22..87f56692f6d 100644 --- a/keyboards/clueboard/60/rules.mk +++ b/keyboards/clueboard/60/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/clueboard/66/rev4/rules.mk b/keyboards/clueboard/66/rev4/rules.mk index f8e4c07a479..f6120c929ff 100644 --- a/keyboards/clueboard/66/rev4/rules.mk +++ b/keyboards/clueboard/66/rev4/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index 3667d63b76a..c508ecbb547 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # LED Configuration LED_MATRIX_ENABLE = yes diff --git a/keyboards/clueboard/california/rules.mk b/keyboards/clueboard/california/rules.mk index e96afd8135c..11719015e9a 100644 --- a/keyboards/clueboard/california/rules.mk +++ b/keyboards/clueboard/california/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C ## Features MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/dztech/dz60rgb/v1/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk index d71fb4c531b..88207bc3f51 100644 --- a/keyboards/dztech/dz60rgb/v1/rules.mk +++ b/keyboards/dztech/dz60rgb/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk index d71fb4c531b..88207bc3f51 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk index 9dfe170032a..426769e248f 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/dztech/dz65rgb/v1/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk index 4570dc3bd31..da88300da54 100644 --- a/keyboards/dztech/dz65rgb/v1/rules.mk +++ b/keyboards/dztech/dz65rgb/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk index 6c13bd2bc1f..e75b0c721a3 100644 --- a/keyboards/hadron/ver3/rules.mk +++ b/keyboards/hadron/ver3/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/handwired/co60/rev6/rules.mk b/keyboards/handwired/co60/rev6/rules.mk index b20c2efedc7..f4e7ae924d1 100644 --- a/keyboards/handwired/co60/rev6/rules.mk +++ b/keyboards/handwired/co60/rev6/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/handwired/co60/rev7/rules.mk b/keyboards/handwired/co60/rev7/rules.mk index 50e4bb8918c..3e15f073ff7 100644 --- a/keyboards/handwired/co60/rev7/rules.mk +++ b/keyboards/handwired/co60/rev7/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Use SPI for RGB underglow: WS2812_DRIVER = spi diff --git a/keyboards/handwired/d48/rules.mk b/keyboards/handwired/d48/rules.mk index 57c83694e1d..41a6cc5220b 100644 --- a/keyboards/handwired/d48/rules.mk +++ b/keyboards/handwired/d48/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk index 0604f117639..dfbb0959f94 100644 --- a/keyboards/handwired/ddg_56/rules.mk +++ b/keyboards/handwired/ddg_56/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk index 5a83cfcf964..88bc406a23d 100644 --- a/keyboards/handwired/floorboard/rules.mk +++ b/keyboards/handwired/floorboard/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/onekey/proton_c/rules.mk b/keyboards/handwired/onekey/proton_c/rules.mk index b17a3d0316b..4e157baeda1 100644 --- a/keyboards/handwired/onekey/proton_c/rules.mk +++ b/keyboards/handwired/onekey/proton_c/rules.mk @@ -1,2 +1,3 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C diff --git a/keyboards/handwired/onekey/pytest/rules.mk b/keyboards/handwired/onekey/pytest/rules.mk index b17a3d0316b..4e157baeda1 100644 --- a/keyboards/handwired/onekey/pytest/rules.mk +++ b/keyboards/handwired/onekey/pytest/rules.mk @@ -1,2 +1,3 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C diff --git a/keyboards/handwired/selene/rules.mk b/keyboards/handwired/selene/rules.mk index 9416bc5fd3e..bfb967f9a53 100644 --- a/keyboards/handwired/selene/rules.mk +++ b/keyboards/handwired/selene/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/sick_pad/rules.mk b/keyboards/handwired/sick_pad/rules.mk index bfe731ecce7..28578f08246 100644 --- a/keyboards/handwired/sick_pad/rules.mk +++ b/keyboards/handwired/sick_pad/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/steamvan/rev1/rules.mk b/keyboards/handwired/steamvan/rev1/rules.mk index 797d7b35da2..30c74d2ece1 100644 --- a/keyboards/handwired/steamvan/rev1/rules.mk +++ b/keyboards/handwired/steamvan/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Use SPI for RGB underglow: WS2812_DRIVER = spi diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index 25bb402698c..b23f2a5fe1c 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/hs60/v2/ansi/rules.mk b/keyboards/hs60/v2/ansi/rules.mk index 8efabcccbf9..74889decfb8 100644 --- a/keyboards/hs60/v2/ansi/rules.mk +++ b/keyboards/hs60/v2/ansi/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/hs60/v2/hhkb/rules.mk b/keyboards/hs60/v2/hhkb/rules.mk index 14951cca70b..561a8cd06ab 100644 --- a/keyboards/hs60/v2/hhkb/rules.mk +++ b/keyboards/hs60/v2/hhkb/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/hs60/v2/iso/rules.mk b/keyboards/hs60/v2/iso/rules.mk index 96bfbce056b..62af70cc059 100644 --- a/keyboards/hs60/v2/iso/rules.mk +++ b/keyboards/hs60/v2/iso/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk index 4e9bcf21a7a..4e79819ff7b 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C BACKLIGHT_ENABLE = no BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration diff --git a/keyboards/kv/revt/rules.mk b/keyboards/kv/revt/rules.mk index d97369b1503..94db629541f 100644 --- a/keyboards/kv/revt/rules.mk +++ b/keyboards/kv/revt/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk index e1d36928fe3..5ea0bd12c1e 100644 --- a/keyboards/mechlovin/adelais/rules.mk +++ b/keyboards/mechlovin/adelais/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk index eb9b1528384..2fe4bb7aa53 100644 --- a/keyboards/mechlovin/hannah60rgb/rules.mk +++ b/keyboards/mechlovin/hannah60rgb/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/hannah65/rules.mk b/keyboards/mechlovin/hannah65/rules.mk index 74157ae7150..57ead17faa9 100644 --- a/keyboards/mechlovin/hannah65/rules.mk +++ b/keyboards/mechlovin/hannah65/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/infinity87/rules.mk b/keyboards/mechlovin/infinity87/rules.mk index 00676c2ecb4..a405eda0375 100644 --- a/keyboards/mechlovin/infinity87/rules.mk +++ b/keyboards/mechlovin/infinity87/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/infinity88/rules.mk b/keyboards/mechlovin/infinity88/rules.mk index 7897007c01c..40e4543e891 100644 --- a/keyboards/mechlovin/infinity88/rules.mk +++ b/keyboards/mechlovin/infinity88/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj61/rev1/rules.mk b/keyboards/melgeek/mj61/rev1/rules.mk index 12c66f05a58..6f196e88492 100644 --- a/keyboards/melgeek/mj61/rev1/rules.mk +++ b/keyboards/melgeek/mj61/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj63/rev1/rules.mk b/keyboards/melgeek/mj63/rev1/rules.mk index d5fc76b8e77..c55beb7d1f7 100644 --- a/keyboards/melgeek/mj63/rev1/rules.mk +++ b/keyboards/melgeek/mj63/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj64/rev1/rules.mk b/keyboards/melgeek/mj64/rev1/rules.mk index 01b8aca4143..f50aefd0498 100644 --- a/keyboards/melgeek/mj64/rev1/rules.mk +++ b/keyboards/melgeek/mj64/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj64/rev2/rules.mk b/keyboards/melgeek/mj64/rev2/rules.mk index 01b8aca4143..f50aefd0498 100644 --- a/keyboards/melgeek/mj64/rev2/rules.mk +++ b/keyboards/melgeek/mj64/rev2/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mojo75/rev1/rules.mk b/keyboards/melgeek/mojo75/rev1/rules.mk index 12c66f05a58..6f196e88492 100644 --- a/keyboards/melgeek/mojo75/rev1/rules.mk +++ b/keyboards/melgeek/mojo75/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/z70ultra/rev1/rules.mk b/keyboards/melgeek/z70ultra/rev1/rules.mk index dce0366f73f..48087186d60 100644 --- a/keyboards/melgeek/z70ultra/rev1/rules.mk +++ b/keyboards/melgeek/z70ultra/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/moonlander/rules.mk b/keyboards/moonlander/rules.mk index 124061072fb..561db849e74 100644 --- a/keyboards/moonlander/rules.mk +++ b/keyboards/moonlander/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/nebula68/rules.mk b/keyboards/nebula68/rules.mk index 399385b3e0e..40e17f1b4f1 100755 --- a/keyboards/nebula68/rules.mk +++ b/keyboards/nebula68/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/nk65/rules.mk b/keyboards/nk65/rules.mk index f7db412a243..af41e71cbc9 100755 --- a/keyboards/nk65/rules.mk +++ b/keyboards/nk65/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/nk87/rules.mk b/keyboards/nk87/rules.mk index cdf4668ec16..e10ec5bc03f 100755 --- a/keyboards/nk87/rules.mk +++ b/keyboards/nk87/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk index 18eada389f1..716e5feda7a 100644 --- a/keyboards/planck/ez/rules.mk +++ b/keyboards/planck/ez/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/planck/rev6/rules.mk b/keyboards/planck/rev6/rules.mk index 02d6b895356..fc43bef5713 100644 --- a/keyboards/planck/rev6/rules.mk +++ b/keyboards/planck/rev6/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk index a5fc16a2e57..e4d48e5b592 100644 --- a/keyboards/preonic/rev3/rules.mk +++ b/keyboards/preonic/rev3/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/rgbkb/pan/rev1/proton_c/rules.mk b/keyboards/rgbkb/pan/rev1/proton_c/rules.mk index b17a3d0316b..e7e9d992d2e 100644 --- a/keyboards/rgbkb/pan/rev1/proton_c/rules.mk +++ b/keyboards/rgbkb/pan/rev1/proton_c/rules.mk @@ -1,2 +1,3 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C \ No newline at end of file diff --git a/keyboards/yugo_m/model_m_101/rules.mk b/keyboards/yugo_m/model_m_101/rules.mk index 6d1c5312311..12a2e3dea67 100644 --- a/keyboards/yugo_m/model_m_101/rules.mk +++ b/keyboards/yugo_m/model_m_101/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h index ac2d9a1eed5..c6f5a8ac520 100644 --- a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -127,8 +127,8 @@ * DAC driver system settings. */ #define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE #define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 #define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 #define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 @@ -141,10 +141,10 @@ #define STM32_GPT_USE_TIM2 FALSE #define STM32_GPT_USE_TIM3 FALSE #define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 TRUE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM15 FALSE #define STM32_GPT_USE_TIM16 FALSE #define STM32_GPT_USE_TIM17 FALSE #define STM32_GPT_TIM1_IRQ_PRIORITY 7 @@ -158,7 +158,7 @@ /* * I2C driver system settings. */ -#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C1 FALSE #define STM32_I2C_USE_I2C2 FALSE #define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_I2C1_IRQ_PRIORITY 10 @@ -189,8 +189,8 @@ #define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM15 FALSE #define STM32_PWM_USE_TIM16 FALSE @@ -213,7 +213,7 @@ * SERIAL driver system settings. */ #define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE @@ -227,7 +227,7 @@ * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI2 FALSE #define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1 diff --git a/platforms/chibios/QMK_PROTON_C/board/board.mk b/platforms/chibios/QMK_PROTON_C/board/board.mk new file mode 100644 index 00000000000..f891e652476 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/QMK_PROTON_C/configs/board.h b/platforms/chibios/QMK_PROTON_C/configs/board.h new file mode 100644 index 00000000000..97159964d05 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/board.h @@ -0,0 +1,37 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS + +/* + * USB bus activation macro, required by the USB driver. + */ +#define usb_lld_connect_bus(usbp) \ + do { \ + palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)); \ + } while (0) + +/* + * USB bus de-activation macro, required by the USB driver. + */ +#define usb_lld_disconnect_bus(usbp) \ + do { \ + palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL); \ + palClearPad(GPIOA, GPIOA_USB_DP); \ + } while (0) diff --git a/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h b/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h new file mode 100644 index 00000000000..3b0e9d20a6a --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * /tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/platforms/chibios/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/QMK_PROTON_C/configs/chconf.h new file mode 100644 index 00000000000..aac33037058 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 100000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/platforms/chibios/QMK_PROTON_C/configs/config.h b/platforms/chibios/QMK_PROTON_C/configs/config.h new file mode 100644 index 00000000000..a73f0c0b475 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/config.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/QMK_PROTON_C/configs/halconf.h new file mode 100644 index 00000000000..a9f2cf77b49 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS TRUE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h new file mode 100644 index 00000000000..ac2d9a1eed5 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h @@ -0,0 +1,273 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF +#define STM32F303_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 15 +#define STM32_IRQ_EXTI20_PRIORITY 15 +#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_USE_TIM15 TRUE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk similarity index 64% rename from platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk rename to platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk index 23907c810a3..3fa73a96e03 100644 --- a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk +++ b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk @@ -1,9 +1,12 @@ # Proton C MCU settings for converting AVR projects -MCU = STM32F303 +TARGET := $(TARGET)_proton_c +MCU := STM32F303 +BOARD := QMK_PROTON_C +OPT_DEFS += -DCONVERT_TO_PROTON_C # These are defaults based on what has been implemented for ARM boards AUDIO_ENABLE = yes WS2812_DRIVER = bitbang # Force task driven PWM until ARM can provide automatic configuration -BACKLIGHT_DRIVER = software +BACKLIGHT_DRIVER = software \ No newline at end of file diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/common/configs/halconf.h index 6b48e289f90..a9f2cf77b49 100644 --- a/platforms/chibios/common/configs/halconf.h +++ b/platforms/chibios/common/configs/halconf.h @@ -31,7 +31,7 @@ #define _CHIBIOS_HAL_CONF_ #define _CHIBIOS_HAL_CONF_VER_7_0_ -#include "mcuconf.h" +#include /** * @brief Enables the PAL subsystem. diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index e53edccee21..ceed2a7b428 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -71,6 +71,9 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk)"," BOARD_PATH = $(TOP_DIR)/platforms/chibios/$(BOARD) BOARD_MK += $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk KEYBOARD_PATHS += $(BOARD_PATH)/configs + ifneq ("$(wildcard $(BOARD_PATH)/rules.mk)","") + include $(BOARD_PATH)/rules.mk + endif endif ifeq ("$(wildcard $(BOARD_MK))","")