* intial commit * fix up some of the cookie cutter code * define pins used and size of switch matrix * enable lighting settings and bootmagic lite * create the appropriate LAYOUT macro * remove a comma for compilation errors * provide a suitable keymap * disable console and command due to firmware being too large * add Caps Lock LED support * Add QMK Configurator support * fix markdown rendering * fix mechmerlin to mechkeyspull/5342/head
@ -0,0 +1,245 @@ | |||||
/* | |||||
Copyright 2019 MechMerlin | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x0000 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Mechkeys | |||||
#define PRODUCT mechkeys mk60 | |||||
#define DESCRIPTION A custom 60% keyboard | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 15 | |||||
/* | |||||
* Keyboard Matrix Assignments | |||||
* | |||||
* Change this to how you wired your keyboard | |||||
* COLS: AVR pins used for columns, left to right | |||||
* ROWS: AVR pins used for rows, top to bottom | |||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||||
* | |||||
*/ | |||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } | |||||
#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW, ROW2COL*/ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* | |||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||||
*/ | |||||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||||
#define BACKLIGHT_PIN B6 | |||||
#define BACKLIGHT_BREATHING | |||||
#define BACKLIGHT_LEVELS 6 | |||||
#define RGB_DI_PIN E6 | |||||
#ifdef RGB_DI_PIN | |||||
#define RGBLED_NUM 12 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||||
/*== all animations enable ==*/ | |||||
#define RGBLIGHT_ANIMATIONS | |||||
/*== or choose animations ==*/ | |||||
// #define RGBLIGHT_EFFECT_BREATHING | |||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||||
// #define RGBLIGHT_EFFECT_SNAKE | |||||
// #define RGBLIGHT_EFFECT_KNIGHT | |||||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||||
#endif | |||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* number of backlight levels */ | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||||
*/ | |||||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||||
/* | |||||
* Force NKRO | |||||
* | |||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||||
* makefile for this to work.) | |||||
* | |||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||||
* until the next keyboard reset. | |||||
* | |||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||||
* fully operational during normal computer usage. | |||||
* | |||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||||
* power-up. | |||||
* | |||||
*/ | |||||
//#define FORCE_NKRO | |||||
/* | |||||
* Magic Key Options | |||||
* | |||||
* Magic keys are hotkey commands that allow control over firmware functions of | |||||
* the keyboard. They are best used in combination with the HID Listen program, | |||||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||||
* | |||||
* The options below allow the magic key functionality to be changed. This is | |||||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||||
* | |||||
*/ | |||||
/* key combination for magic key command */ | |||||
/* defined by default; to change, uncomment and set to the combination you want */ | |||||
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||||
/* control how magic key switches layers */ | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||||
/* override magic key keymap */ | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||||
//#define MAGIC_KEY_HELP H | |||||
//#define MAGIC_KEY_HELP_ALT SLASH | |||||
//#define MAGIC_KEY_DEBUG D | |||||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||||
//#define MAGIC_KEY_DEBUG_KBD K | |||||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||||
//#define MAGIC_KEY_VERSION V | |||||
//#define MAGIC_KEY_STATUS S | |||||
//#define MAGIC_KEY_CONSOLE C | |||||
//#define MAGIC_KEY_LAYER0 0 | |||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE | |||||
//#define MAGIC_KEY_LAYER1 1 | |||||
//#define MAGIC_KEY_LAYER2 2 | |||||
//#define MAGIC_KEY_LAYER3 3 | |||||
//#define MAGIC_KEY_LAYER4 4 | |||||
//#define MAGIC_KEY_LAYER5 5 | |||||
//#define MAGIC_KEY_LAYER6 6 | |||||
//#define MAGIC_KEY_LAYER7 7 | |||||
//#define MAGIC_KEY_LAYER8 8 | |||||
//#define MAGIC_KEY_LAYER9 9 | |||||
//#define MAGIC_KEY_BOOTLOADER B | |||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC | |||||
//#define MAGIC_KEY_LOCK CAPS | |||||
//#define MAGIC_KEY_EEPROM E | |||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE | |||||
//#define MAGIC_KEY_NKRO N | |||||
//#define MAGIC_KEY_SLEEP_LED Z | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
/* | |||||
* MIDI options | |||||
*/ | |||||
/* Prevent use of disabled MIDI features in the keymap */ | |||||
//#define MIDI_ENABLE_STRICT 1 | |||||
/* enable basic MIDI features: | |||||
- MIDI notes can be sent when in Music mode is on | |||||
*/ | |||||
//#define MIDI_BASIC | |||||
/* enable advanced MIDI features: | |||||
- MIDI notes can be added to the keymap | |||||
- Octave shift and transpose | |||||
- Virtual sustain, portamento, and modulation wheel | |||||
- etc. | |||||
*/ | |||||
//#define MIDI_ADVANCED | |||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||||
/* | |||||
* HD44780 LCD Display Configuration | |||||
*/ | |||||
/* | |||||
#define LCD_LINES 2 //< number of visible lines of the display | |||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||||
#if LCD_IO_MODE | |||||
#define LCD_PORT PORTB //< port for the LCD lines | |||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||||
#define LCD_RS_PIN 3 //< pin for RS line | |||||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||||
#define LCD_RW_PIN 2 //< pin for RW line | |||||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||||
#define LCD_E_PIN 1 //< pin for Enable line | |||||
#endif | |||||
*/ | |||||
/* Bootmagic Lite key configuration */ | |||||
// #define BOOTMAGIC_LITE_ROW 0 | |||||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,83 @@ | |||||
{ | |||||
"keyboard_name": "MK60", | |||||
"url": "", | |||||
"maintainer": "qmk", | |||||
"width": 15, | |||||
"height": 5, | |||||
"layouts": { | |||||
"LAYOUT": { | |||||
"key_count": 68, | |||||
"layout": [ | |||||
{"label":"K00", "x":0, "y":0}, | |||||
{"label":"K01", "x":1, "y":0}, | |||||
{"label":"K02", "x":2, "y":0}, | |||||
{"label":"K03", "x":3, "y":0}, | |||||
{"label":"K04", "x":4, "y":0}, | |||||
{"label":"K05", "x":5, "y":0}, | |||||
{"label":"K06", "x":6, "y":0}, | |||||
{"label":"K07", "x":7, "y":0}, | |||||
{"label":"K08", "x":8, "y":0}, | |||||
{"label":"K09", "x":9, "y":0}, | |||||
{"label":"K0A", "x":10, "y":0}, | |||||
{"label":"K0B", "x":11, "y":0}, | |||||
{"label":"K0C", "x":12, "y":0}, | |||||
{"label":"K0D", "x":13, "y":0}, | |||||
{"label":"K0E", "x":14, "y":0}, | |||||
{"label":"K10", "x":0, "y":1, "w":1.5}, | |||||
{"label":"K12", "x":1.5, "y":1}, | |||||
{"label":"K13", "x":2.5, "y":1}, | |||||
{"label":"K14", "x":3.5, "y":1}, | |||||
{"label":"K15", "x":4.5, "y":1}, | |||||
{"label":"K16", "x":5.5, "y":1}, | |||||
{"label":"K17", "x":6.5, "y":1}, | |||||
{"label":"K18", "x":7.5, "y":1}, | |||||
{"label":"K19", "x":8.5, "y":1}, | |||||
{"label":"K1A", "x":9.5, "y":1}, | |||||
{"label":"K1B", "x":10.5, "y":1}, | |||||
{"label":"K1C", "x":11.5, "y":1}, | |||||
{"label":"K1D", "x":12.5, "y":1}, | |||||
{"label":"K1E", "x":13.5, "y":1, "w":1.5}, | |||||
{"label":"K20", "x":0, "y":2, "w":1.75}, | |||||
{"label":"K22", "x":1.75, "y":2}, | |||||
{"label":"K23", "x":2.75, "y":2}, | |||||
{"label":"K24", "x":3.75, "y":2}, | |||||
{"label":"K25", "x":4.75, "y":2}, | |||||
{"label":"K26", "x":5.75, "y":2}, | |||||
{"label":"K27", "x":6.75, "y":2}, | |||||
{"label":"K28", "x":7.75, "y":2}, | |||||
{"label":"K29", "x":8.75, "y":2}, | |||||
{"label":"K2A", "x":9.75, "y":2}, | |||||
{"label":"K2B", "x":10.75, "y":2}, | |||||
{"label":"K2C", "x":11.75, "y":2}, | |||||
{"label":"K2D", "x":12.75, "y":2, "w":2.25}, | |||||
{"label":"K30", "x":0, "y":3}, | |||||
{"label":"K31", "x":1, "y":3}, | |||||
{"label":"K32", "x":2, "y":3}, | |||||
{"label":"K33", "x":3, "y":3}, | |||||
{"label":"K34", "x":4, "y":3}, | |||||
{"label":"K35", "x":5, "y":3}, | |||||
{"label":"K36", "x":6, "y":3}, | |||||
{"label":"K37", "x":7, "y":3}, | |||||
{"label":"K38", "x":8, "y":3}, | |||||
{"label":"K39", "x":9, "y":3}, | |||||
{"label":"K3A", "x":10, "y":3}, | |||||
{"label":"K3B", "x":11, "y":3}, | |||||
{"label":"K3C", "x":12, "y":3}, | |||||
{"label":"K3D", "x":13, "y":3}, | |||||
{"label":"K3E", "x":14, "y":3}, | |||||
{"label":"K40", "x":0, "y":4, "w":1.75}, | |||||
{"label":"K42", "x":1.75, "y":4, "w":1.25}, | |||||
{"label":"K43", "x":3, "y":4, "w":1.25}, | |||||
{"label":"K44", "x":4.25, "y":4, "w":1.25}, | |||||
{"label":"K47", "x":5.5, "y":4, "w":3}, | |||||
{"label":"K49", "x":8.5, "y":4, "w":1.5}, | |||||
{"label":"K4A", "x":10, "y":4}, | |||||
{"label":"K4B", "x":11, "y":4}, | |||||
{"label":"K4C", "x":12, "y":4}, | |||||
{"label":"K4D", "x":13, "y":4}, | |||||
{"label":"K4E", "x":14, "y":4} | |||||
] | |||||
} | |||||
} | |||||
} | |||||
@ -0,0 +1,19 @@ | |||||
/* Copyright 2019 MechMerlin | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
// place overrides here |
@ -0,0 +1,74 @@ | |||||
/* Copyright 2019 MechMerlin | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
// Defines the keycodes used by our macros in process_record_user | |||||
enum custom_keycodes { | |||||
QMKBEST = SAFE_RANGE, | |||||
QMKURL | |||||
}; | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT( \ | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \ | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, \ | |||||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_NO, KC_Z, \ | |||||
KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_DEL, KC_LCTL, KC_LGUI, KC_LALT, \ | |||||
MO(1), KC_SPC, KC_RALT, KC_PGUP, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT \ | |||||
), | |||||
[1] = LAYOUT( \ | |||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, \ | |||||
BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, \ | |||||
RGB_MOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ | |||||
), | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QMKBEST: | |||||
if (record->event.pressed) { | |||||
// when keycode QMKBEST is pressed | |||||
SEND_STRING("QMK is the best thing ever!"); | |||||
} else { | |||||
// when keycode QMKBEST is released | |||||
} | |||||
break; | |||||
case QMKURL: | |||||
if (record->event.pressed) { | |||||
// when keycode QMKURL is pressed | |||||
SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); | |||||
} else { | |||||
// when keycode QMKURL is released | |||||
} | |||||
break; | |||||
} | |||||
return true; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
} |
@ -0,0 +1 @@ | |||||
# The default keymap for mk60 |
@ -0,0 +1,50 @@ | |||||
/* Copyright 2019 MechMerlin | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "mk60.h" | |||||
void matrix_init_kb(void) { | |||||
// put your keyboard start-up code here | |||||
// runs once when the firmware starts up | |||||
setPinOutput(B7); | |||||
matrix_init_user(); | |||||
} | |||||
void matrix_scan_kb(void) { | |||||
// put your looping keyboard code here | |||||
// runs every cycle (a lot) | |||||
matrix_scan_user(); | |||||
} | |||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||||
// put your per-action keyboard code here | |||||
// runs for every action, just before processing by the firmware | |||||
return process_record_user(keycode, record); | |||||
} | |||||
void led_set_kb(uint8_t usb_led) { | |||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||||
if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){ | |||||
writePinLow(B7); | |||||
}else { | |||||
writePinHigh(B7); | |||||
} | |||||
led_set_user(usb_led); | |||||
} |
@ -0,0 +1,41 @@ | |||||
/* Copyright 2019 MechMerlin | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
/* This a shortcut to help you visually see your layout. | |||||
* | |||||
* The first section contains all of the arguments representing the physical | |||||
* layout of the board and position of the keys. | |||||
* | |||||
* The second converts the arguments into a two-dimensional array which | |||||
* represents the switch matrix. | |||||
*/ | |||||
#define LAYOUT( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||||
k10, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||||
k20, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||||
k40, k42, k43, k44, k47, k49, k4A, k4B, k4C, k4D, k4E \ | |||||
) \ | |||||
{ \ | |||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E}, \ | |||||
{ k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E}, \ | |||||
{ k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, KC_NO}, \ | |||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E}, \ | |||||
{ k40, KC_NO, k42, k43, k44, KC_NO, KC_NO, k47, KC_NO, k49, k4A, k4B, k4C, k4D, k4E}, \ | |||||
} |
@ -0,0 +1,13 @@ | |||||
# mechkeys mk60 | |||||
60% keyboard with RGB underglow and backlights | |||||
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) | |||||
Hardware Supported: MK60 | |||||
Hardware Availability: The MK60 was discontinued by [mechkeys.ca](https://mechkeys.ca/) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make mk60:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,81 @@ | |||||
# MCU name | |||||
#MCU = at90usb1286 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Bootloader selection | |||||
# Teensy halfkay | |||||
# Pro Micro caterina | |||||
# Atmel DFU atmel-dfu | |||||
# LUFA DFU lufa-dfu | |||||
# QMK DFU qmk-dfu | |||||
# atmega32a bootloadHID | |||||
BOOTLOADER = atmel-dfu | |||||
# If you don't know the bootloader type, then you can specify the | |||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) |