This creates a v1 and v2 subproject. V1 retains all the same implementations of the bootmapper-ported Mechmnini 1 including #2196. V2 adds the Mechmini 2.0 kayboard support (I know it took me way to long to get it a pull request in). All readme's updated to reflect compiling the two seperate keyboards. Simply either `make mechmini/v1:default` or `make mechmini/v2:defualt`. Utilizing the rules.mk using `make mechmini:default` will automatically create the Mechmini 2 default keymap as this is the current version and has a much wider user base.pull/2218/head
@ -1,45 +1,28 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134 | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
*This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | */ | ||||
#include "config_common.h" | #include "config_common.h" | ||||
#ifndef CONFIG_H | #ifndef CONFIG_H | ||||
#define CONFIG_H | #define CONFIG_H | ||||
#define VENDOR_ID 0x20A0 | |||||
#define PRODUCT_ID 0x422D | |||||
// TODO: share these strings with usbconfig.h | |||||
// Edit usbconfig.h to change these. | |||||
#define MANUFACTURER winkeyless.kr | |||||
#define PRODUCT mechmini | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 15 | |||||
#define NO_UART 1 | |||||
/* RGB underglow */ | |||||
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. | |||||
// The same pin is used on the JJ40, at least. | |||||
#define RGBLED_NUM 16 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGB_DI_PIN E2 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0xCA40 | |||||
#define MANUFACTURER MECHKEYS | |||||
#define PRODUCT Mechmini | |||||
#define DESCRIPTION 40% modular keyboard | |||||
#endif | #endif |
@ -1,46 +1,17 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134 | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
*This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | */ | ||||
#include "mechmini.h" | #include "mechmini.h" | ||||
#include <avr/pgmspace.h> | |||||
#include "action_layer.h" | |||||
#include "i2c.h" | |||||
#include "quantum.h" | |||||
#include "rgblight.h" | |||||
// custom RGB driver | |||||
extern rgblight_config_t rgblight_config; | |||||
void rgblight_set(void) { | |||||
if (!rgblight_config.enable) { | |||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||||
led[i].r = 0; | |||||
led[i].g = 0; | |||||
led[i].b = 0; | |||||
} | |||||
} | |||||
i2c_init(); | |||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_user(void) { | |||||
rgblight_task(); | |||||
/* add other tasks to be done on each matrix scan */ | |||||
} |
@ -1,42 +1,30 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134 | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
*This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | */ | ||||
#ifndef MECHMINI_H | #ifndef MECHMINI_H | ||||
#define MECHMINI_H | #define MECHMINI_H | ||||
#include "keycode.h" | |||||
#include "action.h" | |||||
#include "quantum.h" | #include "quantum.h" | ||||
#define KEYMAP( \ | |||||
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \ | |||||
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \ | |||||
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \ | |||||
K00, K10, K20, K56, K57, KB0, KC0, K66 \ | |||||
) \ | |||||
{ \ | |||||
{ K00, K10, K20, K56, KC_NO, K57, KC_NO, KC_NO, KB0, KC0, K66, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ | |||||
} | |||||
#ifdef KEYBOARD_mechmini_v1 | |||||
#include "v1.h" | |||||
#endif | |||||
#ifdef KEYBOARD_mechmini_v2 | |||||
#include "v2.h" | |||||
#endif | |||||
#endif | #endif |
@ -1,50 +1 @@ | |||||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
# | |||||
# This program is free software: you can redistribute it and/or modify | |||||
# it under the terms of the GNU General Public License as published by | |||||
# the Free Software Foundation, either version 2 of the License, or | |||||
# (at your option) any later version. | |||||
# | |||||
# This program is distributed in the hope that it will be useful, | |||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
# GNU General Public License for more details. | |||||
# | |||||
# You should have received a copy of the GNU General Public License | |||||
# along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
# MCU name | |||||
MCU = atmega32a | |||||
PROTOCOL = VUSB | |||||
# unsupported features for now | |||||
NO_UART = yes | |||||
NO_SUSPEND_POWER_DOWN = yes | |||||
# processor frequency | |||||
F_CPU = 12000000 | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = atmel-dfu | |||||
# build options | |||||
BOOTMAGIC_ENABLE = yes | |||||
MOUSEKEY_ENABLE = yes | |||||
EXTRAKEY_ENABLE = yes | |||||
CONSOLE_ENABLE = yes | |||||
COMMAND_ENABLE = yes | |||||
BACKLIGHT_ENABLE = no | |||||
RGBLIGHT_ENABLE = yes | |||||
RGBLIGHT_CUSTOM_DRIVER = yes | |||||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||||
# custom matrix setup | |||||
CUSTOM_MATRIX = yes | |||||
SRC = matrix.c i2c.c | |||||
# programming options | |||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex | |||||
DEFAULT_FOLDER = mechmini/v2 |
@ -0,0 +1,83 @@ | |||||
Mechmini V1 | |||||
=========== | |||||
A 40% ortholinear/staggered keyboard, that was originally bootmapper and can be ported to QMK following this readme. This version is no longer in production [More info on MECHKEYS](https://mechkeys.ca). | |||||
Keyboard Maintainer: QMK Community | |||||
Hardware Supported: Mechmini 1 PCB | |||||
Hardware Availability: Version 1 (Bootmapper) no longer in production [MECHKEYS](https://mechkeys.ca) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make mechmini/v1:default | |||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||||
## Mechmini Notes | |||||
Note that this is a complete replacement for the firmware, so you won't be | |||||
using Bootmapper Client to change any keyboard settings, since not all the | |||||
USB report options are supported. | |||||
## Installing | |||||
First, install the requirements. These commands are for OSX, but all you | |||||
need is the AVR toolchain and `bootloadHID` for flashing: | |||||
``` | |||||
$ brew cask install crosspack-avr | |||||
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb | |||||
``` | |||||
In order to use the `./program` script, which can reboot the board into | |||||
the bootloader, you'll need Python 2 with PyUSB installed: | |||||
``` | |||||
$ pip install pyusb | |||||
``` | |||||
Then, with the keyboard plugged in, simply run this command from the | |||||
`qmk_firmware` directory: | |||||
``` | |||||
$ make mechmini:program | |||||
``` | |||||
If you prefer, you can just build it and flash the firmware directly with | |||||
`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it | |||||
in the bootloader: | |||||
``` | |||||
$ make mechmini | |||||
$ bootloadHID -r mechmini_default.hex | |||||
``` | |||||
## Troubleshooting | |||||
From my experience, it's really hard to brick these boards. But these | |||||
tricks have been useful when it got stuck in a weird scenario. | |||||
1. Try plugging the board in while pressing `L_Ctrl`. This will force it | |||||
to boot only the bootloader without loading the firmware. Once this is | |||||
done, just reflash the board with the original firmware. | |||||
2. Sometimes USB hubs can act weird, so try connecting the board directly | |||||
to your computer or plugging/unplugging the USB hub. | |||||
3. If errors happen with | |||||
`./tmk_core/common/avr/suspend.c` it is likely you implemented a RGB underglow sleep setting previously. Simply comment out the following code found under `void suspend_wakeup_init(void)`: | |||||
``` | |||||
ifdef RGBLIGHT_ANIMATIONS | |||||
rgblight_timer_enable(); | |||||
_delay_ms(50); | |||||
rgblight_set(); | |||||
#endif | |||||
``` | |||||
So that the resulting code should know reflect: | |||||
``` | |||||
/*#ifdef RGBLIGHT_ANIMATIONS | |||||
rgblight_timer_enable(); | |||||
_delay_ms(50); | |||||
rgblight_set(); | |||||
#endif*/ | |||||
``` | |||||
@ -0,0 +1,48 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef V1_CONFIG_H | |||||
#define V1_CONFIG_H | |||||
#include "config_common.h" | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0xCA40 | |||||
#define DEVICE_VER 0x0001 | |||||
// TODO: share these strings with usbconfig.h | |||||
// Edit usbconfig.h to change these. | |||||
#define MANUFACTURER MECHKEYS | |||||
#define PRODUCT Mechmini | |||||
#define DESCRIPTION 40% modular keyboard | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 15 | |||||
#define NO_UART 1 | |||||
/* RGB underglow */ | |||||
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. | |||||
// The same pin is used on the JJ40, at least. | |||||
#define RGBLED_NUM 16 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGB_DI_PIN E2 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||||
#endif |
@ -0,0 +1,50 @@ | |||||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
# | |||||
# This program is free software: you can redistribute it and/or modify | |||||
# it under the terms of the GNU General Public License as published by | |||||
# the Free Software Foundation, either version 2 of the License, or | |||||
# (at your option) any later version. | |||||
# | |||||
# This program is distributed in the hope that it will be useful, | |||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
# GNU General Public License for more details. | |||||
# | |||||
# You should have received a copy of the GNU General Public License | |||||
# along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
# MCU name | |||||
MCU = atmega32a | |||||
PROTOCOL = VUSB | |||||
# unsupported features for now | |||||
NO_UART = yes | |||||
NO_SUSPEND_POWER_DOWN = yes | |||||
# processor frequency | |||||
F_CPU = 12000000 | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = atmel-dfu | |||||
# build options | |||||
BOOTMAGIC_ENABLE = yes | |||||
MOUSEKEY_ENABLE = yes | |||||
EXTRAKEY_ENABLE = yes | |||||
CONSOLE_ENABLE = yes | |||||
COMMAND_ENABLE = yes | |||||
BACKLIGHT_ENABLE = no | |||||
RGBLIGHT_ENABLE = yes | |||||
RGBLIGHT_CUSTOM_DRIVER = yes | |||||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||||
# custom matrix setup | |||||
CUSTOM_MATRIX = yes | |||||
SRC = matrix.c i2c.c | |||||
# programming options | |||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex |
@ -0,0 +1,44 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "v1.h" | |||||
#include <avr/pgmspace.h> | |||||
#include "action_layer.h" | |||||
#include "i2c.h" | |||||
#include "quantum.h" | |||||
#include "rgblight.h" | |||||
// custom RGB driver | |||||
extern rgblight_config_t rgblight_config; | |||||
void rgblight_set(void) { | |||||
if (!rgblight_config.enable) { | |||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||||
led[i].r = 0; | |||||
led[i].g = 0; | |||||
led[i].b = 0; | |||||
} | |||||
} | |||||
i2c_init(); | |||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_user(void) { | |||||
rgblight_task(); | |||||
/* add other tasks to be done on each matrix scan */ | |||||
} |
@ -0,0 +1,43 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef V1_H | |||||
#define V2_H | |||||
#include "../mechmini.h" | |||||
#include "keycode.h" | |||||
#include "action.h" | |||||
#include "quantum.h" | |||||
#define KEYMAP( \ | |||||
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \ | |||||
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \ | |||||
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \ | |||||
K00, K10, K20, K56, K57, KB0, KC0, K66 \ | |||||
) \ | |||||
{ \ | |||||
{ K00, K10, K20, K56, KC_NO, K57, KC_NO, KC_NO, KB0, KC0, K66, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ | |||||
} | |||||
#endif |
@ -0,0 +1,20 @@ | |||||
Mechmini 2.0 | |||||
============ | |||||
A 40% compact ortholinear/staggered keyboard. | |||||
Version 2 (Mechmini 2.0) was shipped powered by QMK [More info on MECHKEYS](https://mechkeys.ca). | |||||
Keyboard Maintainer: [TurboMech](https://github.com/TurboMech) | |||||
Hardware Supported: Mechmini 2.0 keyboard | |||||
Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0 | |||||
Make example for this keyboard (after setting up your build environment), this will make the Mechmini 2.0 default keymap (split space): | |||||
make mechmini/v2:default | |||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||||
## Mechmini Notes | |||||
There are 2 versions of the Mechmini keyboard. Please read the readme for the version you have for make instructions. |
@ -0,0 +1,77 @@ | |||||
/* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134 | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
*This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef V2_CONFIG_H | |||||
#define V2_CONFIG_H | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0xCA40 | |||||
#define DEVICE_VER 0x0002 | |||||
#define MANUFACTURER MECHKEYS | |||||
#undef PRODUCT | |||||
#define PRODUCT Mechmini 2 | |||||
#undef DESCRIPTION | |||||
#define DESCRIPTION 40% modular keyboard | |||||
/* key matrix size */ | |||||
#undef MATRIX_COLS | |||||
#undef MATRIX_ROWS | |||||
#define MATRIX_ROWS 4 | |||||
#define MATRIX_COLS 12 | |||||
/* key matrix pins */ | |||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3 } | |||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B3, B1, B0, D5, B7, C7 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* number of backlight levels */ | |||||
#define BACKLIGHT_PIN B6 | |||||
#ifdef BACKLIGHT_PIN | |||||
#define BACKLIGHT_LEVELS 3 | |||||
#endif | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* prevent stuck modifiers */ | |||||
#define PREVENT_STUCK_MODIFIERS | |||||
#define RGB_DI_PIN E2 | |||||
#ifdef RGB_DI_PIN | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 14 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#endif | |||||
#endif |
@ -0,0 +1,124 @@ | |||||
#include "mechmini.h" | |||||
#define _BL 0 | |||||
#define _FN1 1 | |||||
#define _FN2 2 | |||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_BL] = KEYMAP_2U_SPACE_ORTHO( | |||||
F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, | |||||
KC_CAPS, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), | |||||
[_FN1] = KEYMAP_2U_SPACE_ORTHO( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, M(1), M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY), | |||||
[_FN2] = KEYMAP_2U_SPACE_ORTHO( | |||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, | |||||
KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_HOME, KC_END, KC_TRNS, | |||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_PGDN, KC_PGUP, KC_MPLY), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
switch (id) { | |||||
case 1: | |||||
if (record->event.pressed) { | |||||
return MACRO( D(LCTL), T(C), U(LCTL), END ); | |||||
} | |||||
break; | |||||
case 2: | |||||
if (record->event.pressed) { | |||||
return MACRO( D(LCTL), T(V), U(LCTL), END ); | |||||
} | |||||
break; | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} | |||||
enum function_id { | |||||
SHIFT_ESC, | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||||
}; | |||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
static uint8_t shift_esc_shift_mask; | |||||
switch (id) { | |||||
case SHIFT_ESC: | |||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||||
if (record->event.pressed) { | |||||
if (shift_esc_shift_mask) { | |||||
add_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
add_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} else { | |||||
if (shift_esc_shift_mask) { | |||||
del_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
del_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} | |||||
break; | |||||
} | |||||
} |
@ -0,0 +1,116 @@ | |||||
#include "mechmini.h" | |||||
#define _BL 0 | |||||
#define _FN1 1 | |||||
#define _FN2 2 | |||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_BL] = KEYMAP_625_SPACE( | |||||
F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_LSFT, KC_DOT, | |||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, MO(1), MO(2)), | |||||
[_FN1] = KEYMAP_625_SPACE( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, | |||||
KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS, | |||||
KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS, KC_HOME, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||||
[_FN2] = KEYMAP_625_SPACE( | |||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET, | |||||
KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
switch (id) { | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} | |||||
enum function_id { | |||||
SHIFT_ESC, | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||||
}; | |||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
static uint8_t shift_esc_shift_mask; | |||||
switch (id) { | |||||
case SHIFT_ESC: | |||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||||
if (record->event.pressed) { | |||||
if (shift_esc_shift_mask) { | |||||
add_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
add_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} else { | |||||
if (shift_esc_shift_mask) { | |||||
del_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
del_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} | |||||
break; | |||||
} | |||||
} |
@ -0,0 +1,115 @@ | |||||
#include "mechmini.h" | |||||
#define _BL 0 | |||||
#define _FN1 1 | |||||
#define _FN2 2 | |||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_BL] = KEYMAP_SPLIT_SPACE( | |||||
F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_DOT, | |||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RCTL, MO(1), MO(2)), | |||||
[_FN1] = KEYMAP_SPLIT_SPACE( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, | |||||
KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS, | |||||
KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_COMM, KC_TRNS, KC_HOME, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||||
[_FN2] = KEYMAP_SPLIT_SPACE( | |||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET, | |||||
KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
switch (id) { | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} | |||||
enum function_id { | |||||
SHIFT_ESC, | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||||
}; | |||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
static uint8_t shift_esc_shift_mask; | |||||
switch (id) { | |||||
case SHIFT_ESC: | |||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||||
if (record->event.pressed) { | |||||
if (shift_esc_shift_mask) { | |||||
add_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
add_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} else { | |||||
if (shift_esc_shift_mask) { | |||||
del_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
del_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} | |||||
break; | |||||
} | |||||
} |
@ -0,0 +1,2 @@ | |||||
# The Default Mechmini 2.0 Layout - the same as split_space keymap | |||||
@ -0,0 +1,124 @@ | |||||
#include "mechmini.h" | |||||
#define _BL 0 | |||||
#define _FN1 1 | |||||
#define _FN2 2 | |||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_BL] = KEYMAP_ORTHO( | |||||
F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, | |||||
KC_CAPS, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), | |||||
[_FN1] = KEYMAP_ORTHO( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, M(1), M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY), | |||||
[_FN2] = KEYMAP_ORTHO( | |||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, | |||||
KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_HOME, KC_END, KC_TRNS, | |||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_PGDN, KC_PGUP, KC_MPLY), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
switch (id) { | |||||
case 1: | |||||
if (record->event.pressed) { | |||||
return MACRO( D(LCTL), T(C), U(LCTL), END ); | |||||
} | |||||
break; | |||||
case 2: | |||||
if (record->event.pressed) { | |||||
return MACRO( D(LCTL), T(V), U(LCTL), END ); | |||||
} | |||||
break; | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} | |||||
enum function_id { | |||||
SHIFT_ESC, | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||||
}; | |||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
static uint8_t shift_esc_shift_mask; | |||||
switch (id) { | |||||
case SHIFT_ESC: | |||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||||
if (record->event.pressed) { | |||||
if (shift_esc_shift_mask) { | |||||
add_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
add_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} else { | |||||
if (shift_esc_shift_mask) { | |||||
del_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
del_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} | |||||
break; | |||||
} | |||||
} |
@ -0,0 +1,115 @@ | |||||
#include "mechmini.h" | |||||
#define _BL 0 | |||||
#define _FN1 1 | |||||
#define _FN2 2 | |||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_BL] = KEYMAP_SPLIT_SPACE( | |||||
F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_DOT, | |||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RCTL, MO(1), MO(2)), | |||||
[_FN1] = KEYMAP_SPLIT_SPACE( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, | |||||
KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS, | |||||
KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_COMM, KC_TRNS, KC_HOME, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||||
[_FN2] = KEYMAP_SPLIT_SPACE( | |||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET, | |||||
KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
switch (id) { | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} | |||||
enum function_id { | |||||
SHIFT_ESC, | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||||
}; | |||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
static uint8_t shift_esc_shift_mask; | |||||
switch (id) { | |||||
case SHIFT_ESC: | |||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||||
if (record->event.pressed) { | |||||
if (shift_esc_shift_mask) { | |||||
add_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
add_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} else { | |||||
if (shift_esc_shift_mask) { | |||||
del_key(KC_GRV); | |||||
send_keyboard_report(); | |||||
} else { | |||||
del_key(KC_ESC); | |||||
send_keyboard_report(); | |||||
} | |||||
} | |||||
break; | |||||
} | |||||
} |
@ -0,0 +1,2 @@ | |||||
# The Default Mechmini 2.0 Layout | |||||
@ -0,0 +1,63 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = atmel-dfu | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
AUDIO_ENABLE = no | |||||
RGBLIGHT_ENABLE = yes |
@ -0,0 +1 @@ | |||||
#include "v2.h" |
@ -0,0 +1,69 @@ | |||||
/* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134 | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
*This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef V2_H | |||||
#define V2_H | |||||
#include "../mechmini.h" | |||||
#define KEYMAP_ORTHO( \ | |||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ | |||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ | |||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ | |||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ | |||||
) { \ | |||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ | |||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ | |||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ | |||||
{ K300, K301, K302, K303, K304, K305, K305, K307, K308, K309, K310, K311 } \ | |||||
} | |||||
#define KEYMAP_625_SPACE( \ | |||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ | |||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K111, \ | |||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ | |||||
K300, K301, K302, K306, K310, K311 \ | |||||
) { \ | |||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ | |||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO, K111 }, \ | |||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ | |||||
{ K300, K301, K302, KC_NO, KC_NO, KC_NO, K306, KC_NO, KC_NO, KC_NO, K310, K311 } \ | |||||
} | |||||
#define KEYMAP_SPLIT_SPACE( \ | |||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ | |||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K111, \ | |||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ | |||||
K300, K301, K302, K304, K307, K309, K310, K311 \ | |||||
) { \ | |||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ | |||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO, K111 }, \ | |||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ | |||||
{ K300, K301, K302, KC_NO, K304, KC_NO, KC_NO, K307, KC_NO, K309, K310, K311 } \ | |||||
} | |||||
#define KEYMAP_2U_SPACE_ORTHO( \ | |||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ | |||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ | |||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ | |||||
K300, K301, K302, K303, K304, K305, K307, K308, K309, K310, K311 \ | |||||
) { \ | |||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ | |||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ | |||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ | |||||
{ K300, K301, K302, K303, K304, K305, K305, K307, K308, K309, K310, K311 } \ | |||||
} | |||||
#endif |