Browse Source

Change USB PID

pull/6/head
Jun Wako 9 years ago
parent
commit
9de992ba0b
3 changed files with 14 additions and 5 deletions
  1. +1
    -1
      converter/usb_usb/Makefile
  2. +12
    -3
      converter/usb_usb/README
  3. +1
    -1
      converter/usb_usb/config.h

+ 1
- 1
converter/usb_usb/Makefile View File

@ -120,7 +120,7 @@ VPATH += $(TOP_DIR)
# program Leonardo
PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -b57600 -Uflash:w:$(TARGET).hex -P$(DEV)


+ 12
- 3
converter/usb_usb/README View File

@ -19,13 +19,22 @@ Build firmware
$ cd converter/usb_usb
$ make
You will get usb_usb.hex if you are lucky.
Program your Leonardo with avrdude(or easy-going Arduino IDE):
Program converter. Push reset button on Leonardo before run this command. Serial port name(COM17) depends your system. On Linux I got /dev/ttyACM0.
$ DEV=COM17 make program
or
$ avrdude -patmega32u4 -cavr109 -b57600 -Uflash:w:usb_usb.hex -PCOM17
$ avrdude -patmega32u4 -cavr109 -PCOM17 -b57600 -Uflash:w:usb_usb.hex
Limitation
----------
Only supports 'HID Boot protocol'.
Not support keyboard LED yet.
Resource
--------
http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841.html
https://github.com/felis/USB_Host_Shield_2.0
https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}

+ 1
- 1
converter/usb_usb/config.h View File

@ -20,7 +20,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xCAFE
#define PRODUCT_ID 0x005B
#define DEVICE_VER 0x0814
#define MANUFACTURER t.m.k.
#define PRODUCT USB to USB keyboard converter


Loading…
Cancel
Save