* Firmware initial commit, still has a few bugs - mainly rotary encoders do not work and needs cleaning up * Fixed the volume control issue and limited the RGB brightness (can be really bright), added the ability to switch LED mode with left encoder click, and added via support (untested) * Remove define that should go in config.h * Removed define that should be in config.h * Removed LTO_ENABLE as suggested - has issues on ARM Co-authored-by: Drashna Jaelre <drashna@live.com> * Added the correct define for OLED screen size * Applied suggested change to remove description Co-authored-by: Ryan <fauxpark@gmail.com> * Made suggested change to remove backslashes Co-authored-by: Ryan <fauxpark@gmail.com> * Suggested change made to rgblight Co-authored-by: Ryan <fauxpark@gmail.com> * Suggested change made to rgblight Co-authored-by: Ryan <fauxpark@gmail.com> * Suggested change made to remove backslashes Co-authored-by: Ryan <fauxpark@gmail.com> * Suggested change made to rgblight Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/rocketboard_16/rocketboard_16.c Co-authored-by: Ryan <fauxpark@gmail.com> * Added suggested comments Co-authored-by: Ryan <fauxpark@gmail.com> * Made suggested changes to rules file Co-authored-by: Ryan <fauxpark@gmail.com> * Added suggested change to rgblight Co-authored-by: Ryan <fauxpark@gmail.com> * Added info.json for QMK configurator * Update readme.md * This change makes the firmware work... through magic... seriously, no idea - but it works! * Updated dimming step, OLED functionality, and rules for formatting - Changed the dimming step size for smoother dimming with the reduced range - Added lots of OLED functionality - QMK logo and title at top, num/caps/scroll lock status, and backlight brightness level - Updated the rules.mk file to comply more closely with the formatting guidelines * Fixed tab issues Co-authored-by: Ryan <fauxpark@gmail.com> * Updated to use bootmagic lite with the key that usually turns rgb on/off Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/10826/head
@ -0,0 +1,714 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file rt/templates/chconf.h | |||
* @brief Configuration file template. | |||
* @details A copy of this file must be placed in each project directory, it | |||
* contains the application specific kernel settings. | |||
* | |||
* @addtogroup config | |||
* @details Kernel related settings and hooks. | |||
* @{ | |||
*/ | |||
#ifndef CHCONF_H | |||
#define CHCONF_H | |||
#define _CHIBIOS_RT_CONF_ | |||
#define _CHIBIOS_RT_CONF_VER_6_0_ | |||
/*===========================================================================*/ | |||
/** | |||
* @name System timers settings | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System time counter resolution. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#if !defined(CH_CFG_ST_RESOLUTION) | |||
#define CH_CFG_ST_RESOLUTION 32 | |||
#endif | |||
/** | |||
* @brief System tick frequency. | |||
* @details Frequency of the system timer that drives the system ticks. This | |||
* setting also defines the system tick time unit. | |||
*/ | |||
#if !defined(CH_CFG_ST_FREQUENCY) | |||
#define CH_CFG_ST_FREQUENCY 100000 | |||
#endif | |||
/** | |||
* @brief Time intervals data size. | |||
* @note Allowed values are 16, 32 or 64 bits. | |||
*/ | |||
#if !defined(CH_CFG_INTERVALS_SIZE) | |||
#define CH_CFG_INTERVALS_SIZE 32 | |||
#endif | |||
/** | |||
* @brief Time types data size. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#if !defined(CH_CFG_TIME_TYPES_SIZE) | |||
#define CH_CFG_TIME_TYPES_SIZE 32 | |||
#endif | |||
/** | |||
* @brief Time delta constant for the tick-less mode. | |||
* @note If this value is zero then the system uses the classic | |||
* periodic tick. This value represents the minimum number | |||
* of ticks that is safe to specify in a timeout directive. | |||
* The value one is not valid, timeouts are rounded up to | |||
* this value. | |||
*/ | |||
#if !defined(CH_CFG_ST_TIMEDELTA) | |||
#define CH_CFG_ST_TIMEDELTA 0 | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel parameters and options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Round robin interval. | |||
* @details This constant is the number of system ticks allowed for the | |||
* threads before preemption occurs. Setting this value to zero | |||
* disables the preemption for threads with equal priority and the | |||
* round robin becomes cooperative. Note that higher priority | |||
* threads can still preempt, the kernel is always preemptive. | |||
* @note Disabling the round robin preemption makes the kernel more compact | |||
* and generally faster. | |||
* @note The round robin preemption is not supported in tickless mode and | |||
* must be set to zero in that case. | |||
*/ | |||
#if !defined(CH_CFG_TIME_QUANTUM) | |||
#define CH_CFG_TIME_QUANTUM 0 | |||
#endif | |||
/** | |||
* @brief Managed RAM size. | |||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||
* then the whole available RAM is used. The core memory is made | |||
* available to the heap allocator and/or can be used directly through | |||
* the simplified core memory allocator. | |||
* | |||
* @note In order to let the OS manage the whole RAM the linker script must | |||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||
*/ | |||
#if !defined(CH_CFG_MEMCORE_SIZE) | |||
#define CH_CFG_MEMCORE_SIZE 0 | |||
#endif | |||
/** | |||
* @brief Idle thread automatic spawn suppression. | |||
* @details When this option is activated the function @p chSysInit() | |||
* does not spawn the idle thread. The application @p main() | |||
* function becomes the idle thread and must implement an | |||
* infinite loop. | |||
*/ | |||
#if !defined(CH_CFG_NO_IDLE_THREAD) | |||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Performance options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief OS optimization. | |||
* @details If enabled then time efficient rather than space efficient code | |||
* is used when two possible implementations exist. | |||
* | |||
* @note This is not related to the compiler optimization options. | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_OPTIMIZE_SPEED) | |||
#define CH_CFG_OPTIMIZE_SPEED TRUE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Subsystem options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Time Measurement APIs. | |||
* @details If enabled then the time measurement APIs are included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_TM) | |||
#define CH_CFG_USE_TM FALSE | |||
#endif | |||
/** | |||
* @brief Threads registry APIs. | |||
* @details If enabled then the registry APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_REGISTRY) | |||
#define CH_CFG_USE_REGISTRY TRUE | |||
#endif | |||
/** | |||
* @brief Threads synchronization APIs. | |||
* @details If enabled then the @p chThdWait() function is included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_WAITEXIT) | |||
#define CH_CFG_USE_WAITEXIT TRUE | |||
#endif | |||
/** | |||
* @brief Semaphores APIs. | |||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_SEMAPHORES) | |||
#define CH_CFG_USE_SEMAPHORES TRUE | |||
#endif | |||
/** | |||
* @brief Semaphores queuing mode. | |||
* @details If enabled then the threads are enqueued on semaphores by | |||
* priority rather than in FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) | |||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
#endif | |||
/** | |||
* @brief Mutexes APIs. | |||
* @details If enabled then the mutexes APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MUTEXES) | |||
#define CH_CFG_USE_MUTEXES TRUE | |||
#endif | |||
/** | |||
* @brief Enables recursive behavior on mutexes. | |||
* @note Recursive mutexes are heavier and have an increased | |||
* memory footprint. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) | |||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
#endif | |||
/** | |||
* @brief Conditional Variables APIs. | |||
* @details If enabled then the conditional variables APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#if !defined(CH_CFG_USE_CONDVARS) | |||
#define CH_CFG_USE_CONDVARS TRUE | |||
#endif | |||
/** | |||
* @brief Conditional Variables APIs with timeout. | |||
* @details If enabled then the conditional variables APIs with timeout | |||
* specification are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||
*/ | |||
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) | |||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE | |||
#endif | |||
/** | |||
* @brief Events Flags APIs. | |||
* @details If enabled then the event flags APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_EVENTS) | |||
#define CH_CFG_USE_EVENTS TRUE | |||
#endif | |||
/** | |||
* @brief Events Flags APIs with timeout. | |||
* @details If enabled then the events APIs with timeout specification | |||
* are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_EVENTS. | |||
*/ | |||
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) | |||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
#endif | |||
/** | |||
* @brief Synchronous Messages APIs. | |||
* @details If enabled then the synchronous messages APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MESSAGES) | |||
#define CH_CFG_USE_MESSAGES TRUE | |||
#endif | |||
/** | |||
* @brief Synchronous Messages queuing mode. | |||
* @details If enabled then messages are served by priority rather than in | |||
* FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||
*/ | |||
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) | |||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||
#endif | |||
/** | |||
* @brief Mailboxes APIs. | |||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
* included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#if !defined(CH_CFG_USE_MAILBOXES) | |||
#define CH_CFG_USE_MAILBOXES TRUE | |||
#endif | |||
/** | |||
* @brief Core Memory Manager APIs. | |||
* @details If enabled then the core memory manager APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MEMCORE) | |||
#define CH_CFG_USE_MEMCORE TRUE | |||
#endif | |||
/** | |||
* @brief Heap Allocator APIs. | |||
* @details If enabled then the memory heap allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
* @p CH_CFG_USE_SEMAPHORES. | |||
* @note Mutexes are recommended. | |||
*/ | |||
#if !defined(CH_CFG_USE_HEAP) | |||
#define CH_CFG_USE_HEAP TRUE | |||
#endif | |||
/** | |||
* @brief Memory Pools Allocator APIs. | |||
* @details If enabled then the memory pools allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MEMPOOLS) | |||
#define CH_CFG_USE_MEMPOOLS FALSE | |||
#endif | |||
/** | |||
* @brief Objects FIFOs APIs. | |||
* @details If enabled then the objects FIFOs APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_OBJ_FIFOS) | |||
#define CH_CFG_USE_OBJ_FIFOS FALSE | |||
#endif | |||
/** | |||
* @brief Pipes APIs. | |||
* @details If enabled then the pipes APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_PIPES) | |||
#define CH_CFG_USE_PIPES FALSE | |||
#endif | |||
/** | |||
* @brief Dynamic Threads APIs. | |||
* @details If enabled then the dynamic threads creation APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
*/ | |||
#if !defined(CH_CFG_USE_DYNAMIC) | |||
#define CH_CFG_USE_DYNAMIC FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Objects factory options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Objects Factory APIs. | |||
* @details If enabled then the objects factory APIs are included in the | |||
* kernel. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_CFG_USE_FACTORY) | |||
#define CH_CFG_USE_FACTORY FALSE | |||
#endif | |||
/** | |||
* @brief Maximum length for object names. | |||
* @details If the specified length is zero then the name is stored by | |||
* pointer but this could have unintended side effects. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) | |||
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 | |||
#endif | |||
/** | |||
* @brief Enables the registry of generic objects. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) | |||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for generic buffers. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) | |||
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for semaphores. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_SEMAPHORES) | |||
#define CH_CFG_FACTORY_SEMAPHORES FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for mailboxes. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_MAILBOXES) | |||
#define CH_CFG_FACTORY_MAILBOXES FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for objects FIFOs. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) | |||
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for Pipes. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) | |||
#define CH_CFG_FACTORY_PIPES FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Debug options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Debug option, kernel statistics. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_STATISTICS) | |||
#define CH_DBG_STATISTICS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, system state check. | |||
* @details If enabled the correct call protocol for system APIs is checked | |||
* at runtime. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) | |||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, parameters checks. | |||
* @details If enabled then the checks on the API functions input | |||
* parameters are activated. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_ENABLE_CHECKS) | |||
#define CH_DBG_ENABLE_CHECKS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, consistency checks. | |||
* @details If enabled then all the assertions in the kernel code are | |||
* activated. This includes consistency checks inside the kernel, | |||
* runtime anomalies and port-defined checks. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_ENABLE_ASSERTS) | |||
#define CH_DBG_ENABLE_ASSERTS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, trace buffer. | |||
* @details If enabled then the trace buffer is activated. | |||
* | |||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#if !defined(CH_DBG_TRACE_MASK) | |||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
#endif | |||
/** | |||
* @brief Trace buffer entries. | |||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#if !defined(CH_DBG_TRACE_BUFFER_SIZE) | |||
#define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
#endif | |||
/** | |||
* @brief Debug option, stack checks. | |||
* @details If enabled then a runtime stack check is performed. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note The stack check is performed in a architecture/port dependent way. | |||
* It may not be implemented or some ports. | |||
* @note The default failure mode is to halt the system with the global | |||
* @p panic_msg variable set to @p NULL. | |||
*/ | |||
#if !defined(CH_DBG_ENABLE_STACK_CHECK) | |||
#define CH_DBG_ENABLE_STACK_CHECK FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, stacks initialization. | |||
* @details If enabled then the threads working area is filled with a byte | |||
* value when a thread is created. This can be useful for the | |||
* runtime measurement of the used stack. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_FILL_THREADS) | |||
#define CH_DBG_FILL_THREADS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, threads profiling. | |||
* @details If enabled then a field is added to the @p thread_t structure that | |||
* counts the system ticks occurred while executing the thread. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note This debug option is not currently compatible with the | |||
* tickless mode. | |||
*/ | |||
#if !defined(CH_DBG_THREADS_PROFILING) | |||
#define CH_DBG_THREADS_PROFILING FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel hooks | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System structure extension. | |||
* @details User fields added to the end of the @p ch_system_t structure. | |||
*/ | |||
#define CH_CFG_SYSTEM_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief System initialization hook. | |||
* @details User initialization code added to the @p chSysInit() function | |||
* just before interrupts are enabled globally. | |||
*/ | |||
#define CH_CFG_SYSTEM_INIT_HOOK() { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads descriptor structure extension. | |||
* @details User fields added to the end of the @p thread_t structure. | |||
*/ | |||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief Threads initialization hook. | |||
* @details User initialization code added to the @p _thread_init() function. | |||
* | |||
* @note It is invoked from within @p _thread_init() and implicitly from all | |||
* the threads creation APIs. | |||
*/ | |||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads finalization hook. | |||
* @details User finalization code added to the @p chThdExit() API. | |||
*/ | |||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||
/* Add threads finalization code here.*/ \ | |||
} | |||
/** | |||
* @brief Context switch hook. | |||
* @details This hook is invoked just before switching between threads. | |||
*/ | |||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||
/* Context switch code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR enter hook. | |||
*/ | |||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||
/* IRQ prologue code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR exit hook. | |||
*/ | |||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||
/* IRQ epilogue code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread enter hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to activate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||
/* Idle-enter code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread leave hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to deactivate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||
/* Idle-leave code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle Loop hook. | |||
* @details This hook is continuously invoked by the idle thread loop. | |||
*/ | |||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||
/* Idle loop code here.*/ \ | |||
} | |||
/** | |||
* @brief System tick event hook. | |||
* @details This hook is invoked in the system tick handler immediately | |||
* after processing the virtual timers queue. | |||
*/ | |||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||
/* System tick event code here.*/ \ | |||
} | |||
/** | |||
* @brief System halt hook. | |||
* @details This hook is invoked in case to a system halting error before | |||
* the system is halted. | |||
*/ | |||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||
/* System halt code here.*/ \ | |||
} | |||
/** | |||
* @brief Trace hook. | |||
* @details This hook is invoked each time a new record is written in the | |||
* trace buffer. | |||
*/ | |||
#define CH_CFG_TRACE_HOOK(tep) { \ | |||
/* Trace code here.*/ \ | |||
} | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
/*===========================================================================*/ | |||
#endif /* CHCONF_H */ | |||
/** @} */ |
@ -0,0 +1,83 @@ | |||
/* | |||
Copyright 2020 Seth Bonner <fl3tching101@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xB034 | |||
#define PRODUCT_ID 0xFF16 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Rocketboard | |||
#define PRODUCT Rocketboard-16 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 4 | |||
#define MATRIX_ROW_PINS { A9, B13, B14, B15, B3 } | |||
#define MATRIX_COL_PINS { B8, B9, B10, B11 } | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Bootmagic key - row 4, col 1 */ | |||
#define BOOTMAGIC_LITE_ROW 4 | |||
#define BOOTMAGIC_LITE_COLUMN 1 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGB_DI_PIN A4 | |||
#define RGBLED_NUM 16 | |||
#define RGBLIGHT_LIMIT_VAL 128 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_SLEEP | |||
// OLED stuff | |||
#define OLED_DISPLAY_128X64 | |||
// Allows for rotary encoder volume control | |||
#define TAP_CODE_DELAY 20 | |||
/* Encoder stuff */ | |||
#define ENCODERS_PAD_A \ | |||
{ A0, A2 } | |||
#define ENCODERS_PAD_B \ | |||
{ A1, A3 } | |||
#define LOCKING_SUPPORT_ENABLE | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION |
@ -0,0 +1,525 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef HALCONF_H | |||
#define HALCONF_H | |||
#define _CHIBIOS_HAL_CONF_ | |||
#define _CHIBIOS_HAL_CONF_VER_7_0_ | |||
#include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_PAL TRUE | |||
#endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
#define HAL_USE_ADC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
#define HAL_USE_CAN FALSE | |||
#endif | |||
/** | |||
* @brief Enables the cryptographic subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) | |||
#define HAL_USE_CRY FALSE | |||
#endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_DAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
#define HAL_USE_GPT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2C TRUE | |||
#endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2S FALSE | |||
#endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
#define HAL_USE_ICU FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_MAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_MMC_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
#define HAL_USE_PWM TRUE | |||
#endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
#define HAL_USE_RTC TRUE | |||
#endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
#define HAL_USE_SDC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL_USB FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SIO subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) | |||
#define HAL_USE_SIO FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_SPI TRUE | |||
#endif | |||
/** | |||
* @brief Enables the TRNG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) | |||
#define HAL_USE_TRNG FALSE | |||
#endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
#define HAL_USE_UART FALSE | |||
#endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_USB TRUE | |||
#endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
#define HAL_USE_WDG FALSE | |||
#endif | |||
/** | |||
* @brief Enables the WSPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_WSPI FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* PAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
#define PAL_USE_CALLBACKS FALSE | |||
#endif | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) | |||
#define PAL_USE_WAIT FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define ADC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
#define CAN_USE_SLEEP_MODE TRUE | |||
#endif | |||
/** | |||
* @brief Enforces the driver to use direct callbacks rather than OSAL events. | |||
*/ | |||
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
#define CAN_ENFORCE_USE_CALLBACKS FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CRY driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the SW fall-back of the cryptographic driver. | |||
* @details When enabled, this option, activates a fall-back software | |||
* implementation for algorithms not supported by the underlying | |||
* hardware. | |||
* @note Fall-back implementations may not be present for all algorithms. | |||
*/ | |||
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) | |||
#define HAL_CRY_USE_FALLBACK FALSE | |||
#endif | |||
/** | |||
* @brief Makes the driver forcibly use the fall-back implementations. | |||
*/ | |||
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) | |||
#define HAL_CRY_ENFORCE_FALLBACK FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* DAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define DAC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define DAC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the zero-copy API. | |||
*/ | |||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
#define MAC_USE_ZERO_COPY FALSE | |||
#endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
#define MAC_USE_EVENTS TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define MMC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
#define SDC_INIT_RETRY 100 | |||
#endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
#define SDC_MMC_SUPPORT FALSE | |||
#endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define SDC_NICE_WAITING TRUE | |||
#endif | |||
/** | |||
* @brief OCR initialization constant for V20 cards. | |||
*/ | |||
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) | |||
#define SDC_INIT_OCR_V20 0x50FF8000U | |||
#endif | |||
/** | |||
* @brief OCR initialization constant for non-V20 cards. | |||
*/ | |||
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) | |||
#define SDC_INIT_OCR 0x80100000U | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
#define SERIAL_DEFAULT_BITRATE 38400 | |||
#endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 16 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_BUFFERS_SIZE 16 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 256 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_SIZE 1 | |||
#endif | |||
/** | |||
* @brief Serial over USB number of buffers. | |||
* @note The default is 2 buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_NUMBER 2 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define SPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables circular transfers APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) | |||
#define SPI_USE_CIRCULAR FALSE | |||
#endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/** | |||
* @brief Handling method for SPI CS line. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) | |||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
#endif | |||
/*===========================================================================*/ | |||
/* UART driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||
#define UART_USE_WAIT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define UART_USE_MUTUAL_EXCLUSION FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
#define USB_USE_WAIT TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* WSPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define WSPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define WSPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
#endif /* HALCONF_H */ | |||
/** @} */ |
@ -0,0 +1,35 @@ | |||
{ | |||
"keyboard_name": "Rocketboard-16", | |||
"url": "", | |||
"maintainer": "fl3tching101", | |||
"width": 4, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"x": 0, "y": 0}, | |||
{"x": 3, "y": 0}, | |||
{"x": 0, "y": 1}, | |||
{"x": 1, "y": 1}, | |||
{"x": 2, "y": 1}, | |||
{"x": 3, "y": 1}, | |||
{"x": 0, "y": 2}, | |||
{"x": 1, "y": 2}, | |||
{"x": 2, "y": 2}, | |||
{"x": 3, "y": 2}, | |||
{"x": 0, "y": 3}, | |||
{"x": 1, "y": 3}, | |||
{"x": 2, "y": 3}, | |||
{"x": 3, "y": 3}, | |||
{"x": 0, "y": 4}, | |||
{"x": 1, "y": 4}, | |||
{"x": 2, "y": 4}, | |||
{"x": 3, "y": 4} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,89 @@ | |||
/* | |||
Copyright 2020 Seth Bonner <fl3tching101@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BASE 0 | |||
// Use the following format to create custom key codes to make macros out of and such | |||
/* | |||
enum custom_keycodes { | |||
FOO = SAFE_RANGE, | |||
}; | |||
*/ | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT_default( | |||
RGB_MODE_FORWARD, KC_NUMLOCK, | |||
KC_KP_7, KC_KP_8, KC_KP_9, KC_DELETE, | |||
KC_KP_4, KC_KP_5, KC_KP_6, KC_END, | |||
KC_KP_1, KC_KP_2, KC_KP_3, KC_AUDIO_VOL_UP, | |||
KC_KP_0, RGB_TOG, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN | |||
) | |||
}; | |||
void encoder_update_user(uint8_t index, bool clockwise){ | |||
if(index == 0) { // first encoder | |||
if(clockwise){ | |||
tap_code(KC_AUDIO_VOL_UP); | |||
}else{ | |||
tap_code(KC_AUDIO_VOL_DOWN); | |||
} | |||
}else if(index == 1){ // second encoder | |||
if(clockwise){ | |||
rgblight_increase_val(); | |||
}else{ | |||
rgblight_decrease_val(); | |||
} | |||
} | |||
} | |||
#ifdef OLED_DRIVER_ENABLE | |||
static void render_logo(void) { | |||
static const char PROGMEM qmk_logo[] = { | |||
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, | |||
0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, | |||
0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 | |||
}; | |||
oled_write(qmk_logo, false); | |||
} | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } | |||
void oled_task_user(void) { | |||
uint8_t light_level = rgblight_get_val(); | |||
light_level = (uint8_t)(100.0 * ((float)light_level/(float)RGBLIGHT_LIMIT_VAL)); // Convert to % | |||
char c_light_level[3]; | |||
itoa(light_level, c_light_level, 10); | |||
render_logo(); // Render the QMK logo | |||
oled_write_ln(PSTR(""), false); // Add a newline | |||
// Host Keyboard LED Status | |||
led_t led_state = host_keyboard_led_state(); | |||
oled_write(led_state.num_lock ? PSTR(" |NUM|") : PSTR(" | |"), false); | |||
oled_write(led_state.caps_lock ? PSTR("|CAP|") : PSTR("| |"), false); | |||
oled_write(led_state.scroll_lock ? PSTR("|SCR| ") : PSTR("| | "), false); | |||
oled_write_ln(PSTR(""), false); // Add a newline | |||
oled_write(PSTR(" BKLT: "), false); | |||
oled_write(c_light_level, false); | |||
oled_write_ln(PSTR("% "), false); | |||
} | |||
#endif |
@ -0,0 +1,89 @@ | |||
/* | |||
Copyright 2020 Seth Bonner <fl3tching101@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BASE 0 | |||
// Use the following format to create custom key codes to make macros out of and such | |||
/* | |||
enum custom_keycodes { | |||
FOO = SAFE_RANGE, | |||
}; | |||
*/ | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT_default( | |||
RGB_MODE_FORWARD, KC_NUMLOCK, | |||
KC_KP_7, KC_KP_8, KC_KP_9, KC_DELETE, | |||
KC_KP_4, KC_KP_5, KC_KP_6, KC_END, | |||
KC_KP_1, KC_KP_2, KC_KP_3, KC_AUDIO_VOL_UP, | |||
KC_KP_0, RGB_TOG, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN | |||
) | |||
}; | |||
void encoder_update_user(uint8_t index, bool clockwise){ | |||
if(index == 0) { // first encoder | |||
if(clockwise){ | |||
tap_code(KC_AUDIO_VOL_UP); | |||
}else{ | |||
tap_code(KC_AUDIO_VOL_DOWN); | |||
} | |||
}else if(index == 1){ // second encoder | |||
if(clockwise){ | |||
rgblight_increase_val(); | |||
}else{ | |||
rgblight_decrease_val(); | |||
} | |||
} | |||
} | |||
#ifdef OLED_DRIVER_ENABLE | |||
static void render_logo(void) { | |||
static const char PROGMEM qmk_logo[] = { | |||
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, | |||
0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, | |||
0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 | |||
}; | |||
oled_write(qmk_logo, false); | |||
} | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } | |||
void oled_task_user(void) { | |||
uint8_t light_level = rgblight_get_val(); | |||
light_level = (uint8_t)(100.0 * ((float)light_level/(float)RGBLIGHT_LIMIT_VAL)); // Convert to % | |||
char c_light_level[3]; | |||
itoa(light_level, c_light_level, 10); | |||
render_logo(); // Render the QMK logo | |||
oled_write_ln(PSTR(""), false); // Add a newline | |||
// Host Keyboard LED Status | |||
led_t led_state = host_keyboard_led_state(); | |||
oled_write(led_state.num_lock ? PSTR(" |NUM|") : PSTR(" | |"), false); | |||
oled_write(led_state.caps_lock ? PSTR("|CAP|") : PSTR("| |"), false); | |||
oled_write(led_state.scroll_lock ? PSTR("|SCR| ") : PSTR("| | "), false); | |||
oled_write_ln(PSTR(""), false); // Add a newline | |||
oled_write(PSTR(" BKLT: "), false); | |||
oled_write(c_light_level, false); | |||
oled_write_ln(PSTR("% "), false); | |||
} | |||
#endif |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,209 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef _MCUCONF_H_ | |||
#define _MCUCONF_H_ | |||
#define STM32F103_MCUCONF | |||
/* | |||
* STM32F103 drivers configuration. | |||
* The following settings override the default settings present in | |||
* the various device driver implementation headers. | |||
* Note that the settings for each driver only have effect if the whole | |||
* driver is enabled in halconf.h. | |||
* | |||
* IRQ priorities: | |||
* 15...0 Lowest...Highest. | |||
* | |||
* DMA priorities: | |||
* 0...3 Lowest...Highest. | |||
*/ | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
#define STM32_NO_INIT FALSE | |||
#define STM32_HSI_ENABLED TRUE | |||
#define STM32_LSI_ENABLED TRUE | |||
#define STM32_HSE_ENABLED TRUE | |||
#define STM32_LSE_ENABLED TRUE | |||
#define STM32_SW STM32_SW_PLL | |||
#define STM32_PLLSRC STM32_PLLSRC_HSE | |||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 | |||
#define STM32_PLLMUL_VALUE 9 | |||
#define STM32_HPRE STM32_HPRE_DIV1 | |||
#define STM32_PPRE1 STM32_PPRE1_DIV2 | |||
#define STM32_PPRE2 STM32_PPRE2_DIV2 | |||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 | |||
#define STM32_USB_CLOCK_REQUIRED TRUE | |||
#define STM32_USBPRE STM32_USBPRE_DIV1P5 | |||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | |||
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV | |||
#define STM32_PVD_ENABLE FALSE | |||
#define STM32_PLS STM32_PLS_LEV0 | |||
/* | |||
* ADC driver system settings. | |||
*/ | |||
#define STM32_ADC_USE_ADC1 FALSE | |||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
#define STM32_ADC_ADC1_IRQ_PRIORITY 6 | |||
/* | |||
* CAN driver system settings. | |||
*/ | |||
#define STM32_CAN_USE_CAN1 FALSE | |||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11 | |||
/* | |||
* EXT driver system settings. | |||
*/ | |||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 | |||
/* | |||
* GPT driver system settings. | |||
*/ | |||
#define STM32_GPT_USE_TIM1 FALSE | |||
#define STM32_GPT_USE_TIM2 FALSE | |||
#define STM32_GPT_USE_TIM3 FALSE | |||
#define STM32_GPT_USE_TIM4 FALSE | |||
#define STM32_GPT_USE_TIM5 FALSE | |||
#define STM32_GPT_USE_TIM8 FALSE | |||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* I2C driver system settings. | |||
*/ | |||
#define STM32_I2C_USE_I2C1 TRUE | |||
#define STM32_I2C_USE_I2C2 FALSE | |||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 | |||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 | |||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
/* | |||
* ICU driver system settings. | |||
*/ | |||
#define STM32_ICU_USE_TIM1 FALSE | |||
#define STM32_ICU_USE_TIM2 FALSE | |||
#define STM32_ICU_USE_TIM3 FALSE | |||
#define STM32_ICU_USE_TIM4 FALSE | |||
#define STM32_ICU_USE_TIM5 FALSE | |||
#define STM32_ICU_USE_TIM8 FALSE | |||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* PWM driver system settings. | |||
*/ | |||
#define STM32_PWM_USE_ADVANCED FALSE | |||
#define STM32_PWM_USE_TIM1 FALSE | |||
#define STM32_PWM_USE_TIM2 TRUE | |||
#define STM32_PWM_USE_TIM3 FALSE | |||
#define STM32_PWM_USE_TIM4 FALSE | |||
#define STM32_PWM_USE_TIM5 FALSE | |||
#define STM32_PWM_USE_TIM8 FALSE | |||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* RTC driver system settings. | |||
*/ | |||
#define STM32_RTC_IRQ_PRIORITY 15 | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define STM32_SERIAL_USE_USART1 FALSE | |||
#define STM32_SERIAL_USE_USART2 FALSE | |||
#define STM32_SERIAL_USE_USART3 FALSE | |||
#define STM32_SERIAL_USE_UART4 FALSE | |||
#define STM32_SERIAL_USE_UART5 FALSE | |||
#define STM32_SERIAL_USART1_PRIORITY 12 | |||
#define STM32_SERIAL_USART2_PRIORITY 12 | |||
#define STM32_SERIAL_USART3_PRIORITY 12 | |||
#define STM32_SERIAL_UART4_PRIORITY 12 | |||
#define STM32_SERIAL_UART5_PRIORITY 12 | |||
/* | |||
* SPI driver system settings. | |||
*/ | |||
#define STM32_SPI_USE_SPI1 TRUE | |||
#define STM32_SPI_USE_SPI2 FALSE | |||
#define STM32_SPI_USE_SPI3 FALSE | |||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
/* | |||
* ST driver system settings. | |||
*/ | |||
#define STM32_ST_IRQ_PRIORITY 8 | |||
#define STM32_ST_USE_TIMER 2 | |||
/* | |||
* UART driver system settings. | |||
*/ | |||
#define STM32_UART_USE_USART1 FALSE | |||
#define STM32_UART_USE_USART2 FALSE | |||
#define STM32_UART_USE_USART3 FALSE | |||
#define STM32_UART_USART1_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART2_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART3_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||
#define STM32_UART_USART3_DMA_PRIORITY 0 | |||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
/* | |||
* USB driver system settings. | |||
*/ | |||
#define STM32_USB_USE_USB1 TRUE | |||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE | |||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 | |||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 | |||
#endif /* _MCUCONF_H_ */ |
@ -0,0 +1,13 @@ | |||
# Rocketboard 16 | |||
A STM32F103 based macropad/numpad with RGB individual key underglow, dual rotary encoders, and a 128x64 OLED display. [More info on qmk.fm](http://qmk.fm/) | |||
* Keyboard Maintainer: [fl3tching101](https://github.com/fl3tching101) | |||
* Hardware Supported: Rocketboard 16 PCB rev1.1 | |||
* Hardware Availability: Group buy on r/mechmarket | |||
Make example for this keyboard (after setting up your build environment): | |||
make rocketboard_16:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1 @@ | |||
#include "rocketboard_16.h" |
@ -0,0 +1,19 @@ | |||
#pragma once | |||
#include "quantum.h" | |||
#define KNO KC_NO | |||
#define LAYOUT_default( \ | |||
K00, K01, \ | |||
K02, K03, K04, K05, \ | |||
K06, K07, K08, K09, \ | |||
K0A, K0B, K0C, K0D, \ | |||
K0E, K0F, K10, K11 \ | |||
) { \ | |||
{ K00, KC_NO, KC_NO, K01 }, \ | |||
{ K02, K03, K04, K05 }, \ | |||
{ K06, K07, K08, K09 }, \ | |||
{ K0A, K0B, K0C, K0D }, \ | |||
{ K0E, K0F, K10, K11 } \ | |||
} |
@ -0,0 +1,27 @@ | |||
# MCU name | |||
MCU = STM32F103 | |||
# Bootloader selection | |||
BOOTLOADER = stm32duino | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB backlit keys | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
OLED_DRIVER_ENABLE = yes | |||
ENCODER_ENABLE = yes | |||
# Enter lower-power sleep mode when on the ChibiOS idle thread | |||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |