* Initial melody96 keyboard definition. * Fixes for Melody96 keyboard definition.pull/3115/head
@ -0,0 +1,58 @@ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER YMDK | |||
#define PRODUCT Melody96 | |||
#define DESCRIPTION Melody96 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 12 | |||
#define MATRIX_COLS 9 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 } | |||
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_PIN B6 | |||
#ifdef BACKLIGHT_PIN | |||
#define BACKLIGHT_LEVELS 5 | |||
#endif | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* prevent stuck modifiers */ | |||
#define PREVENT_STUCK_MODIFIERS | |||
#define RGB_DI_PIN E2 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 18 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif | |||
#endif |
@ -0,0 +1,70 @@ | |||
#include QMK_KEYBOARD_H | |||
#define _______ KC_TRNS | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), | |||
LAYOUT( | |||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, | |||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), | |||
}; | |||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
return MACRO_NONE; | |||
} | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||
DDRC |= (1 << 6); PORTC &= ~(1 << 6); | |||
} else { | |||
DDRC &= ~(1 << 6); PORTC &= ~(1 << 6); | |||
} | |||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||
DDRC |= (1 << 7); PORTC &= ~(1 << 7); | |||
} else { | |||
DDRC &= ~(1 << 7); PORTC &= ~(1 << 7); | |||
} | |||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||
DDRB |= (1 << 5); PORTB &= ~(1 << 5); | |||
} else { | |||
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); | |||
} | |||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||
} else { | |||
} | |||
if (usb_led & (1 << USB_LED_KANA)) { | |||
} else { | |||
} | |||
} |
@ -0,0 +1 @@ | |||
#include "melody96.h" |
@ -0,0 +1,28 @@ | |||
#ifndef MELODY96_H | |||
#define MELODY96_H | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K050, K051, K052, K053, K054, K055, K056, K057, K058, K118, K117, K115, K114, K113, K116, K112, K111, K110, K063, \ | |||
K040, K041, K042, K043, K044, K045, K046, K047, K048, K108, K107, K105, K104, K103, K106, K102, K101, K100, K064, \ | |||
K030, K031, K032, K033, K034, K035, K036, K037, K038, K098, K097, K095, K094, K084, K096, K092, K091, K090, \ | |||
K020, K021, K022, K023, K024, K025, K026, K027, K028, K088, K087, K085, K093, K086, K082, K081, K080, \ | |||
K010, K011, K012, K013, K014, K015, K016, K017, K018, K078, K077, K075, K074, K073, K076, K072, K071, K070, \ | |||
K000, K001, K002, K006, K008, K007, K005, K004, K003, K066, K062, K061, K060 \ | |||
) { \ | |||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \ | |||
{ K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ | |||
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ | |||
{ K030, K031, K032, K033, K034, K035, K036, K037, K038 }, \ | |||
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \ | |||
{ K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \ | |||
{ K060, K061, K062, K063, K064, KC_NO, K066, KC_NO, KC_NO }, \ | |||
{ K070, K071, K072, K073, K074, K075, K076, K077, K078 }, \ | |||
{ K080, K081, K082, KC_NO, K084, K085, K086, K087, K088 }, \ | |||
{ K090, K091, K092, K093, K094, K095, K096, K097, K098 }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108 }, \ | |||
{ K110, K111, K112, K113, K114, K115, K116, K117, K118 } \ | |||
} | |||
#endif |
@ -0,0 +1,15 @@ | |||
# YMDK Melody96 | |||
![melody96](https://i.imgur.com/9o0a6XF.png) | |||
96-key Keyboard from YMDK | |||
Keyboard Maintainer: [superuser41](https://github.com/kaylanm) | |||
Hardware Supported: melody96 | |||
Hardware Availability: [YMDK, group buy closed](https://geekhack.org/index.php?topic=93614.0) | |||
Make example for this keyboard (after setting up your build environment): | |||
make melody96:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,57 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
AUDIO_ENABLE = no | |||
RGBLIGHT_ENABLE = yes |