@ -0,0 +1,63 @@ | |||
/* | |||
Copyright 2020 KemoNine | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x5156 | |||
#define PRODUCT_ID 0x4C50 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER QVEX | |||
#define PRODUCT Lynepad | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 3 | |||
#define MATRIX_COLS 4 | |||
/* Basic matrix config */ | |||
#define MATRIX_ROW_PINS { C7, F7, F6} | |||
#define MATRIX_COL_PINS { F0, F1, F4, F5 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Encoders */ | |||
#define ENCODERS_PAD_A { D0, B5 } | |||
#define ENCODERS_PAD_B { D1, D6 } | |||
/* LEDs */ | |||
#define RGB_DI_PIN D3 | |||
#ifdef RGB_DI_PIN | |||
#undef RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 4 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_LIMIT_VAL 240 | |||
#endif | |||
/* Definitions for encoder tilt/press support */ | |||
#define ENC_TILT_THRESHOLD 1 | |||
#define PIN_TW_SW D2 // Center | |||
#define PIN_RJ_SW C6 // Center | |||
#define PIN_RJ_DIR_A D4 // Up | |||
#define PIN_RJ_DIR_B D7 // Left | |||
#define PIN_RJ_DIR_C B6 // Down | |||
#define PIN_RJ_DIR_D B4 // Right |
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "QVEX Lynepad", | |||
"url": "https://www.tindie.com/products/qvex_tech/qvex-lynepad-macro-keypad/", | |||
"maintainer": "KemoNine", | |||
"width": 4, | |||
"height": 3, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}] | |||
} | |||
} | |||
} |
@ -0,0 +1,117 @@ | |||
/* Copyright 2020 KemoNine | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap (Base Layer) Default Layer | |||
* |----------------------------| | |||
* | 1 | 2 | 3 | 4 | | | |||
* | 5 | 6 | 7 | 8 | | | |||
* | 9 | 10 | 11 | | | |||
* |----------------------------| | |||
*/ | |||
[0] = LAYOUT( | |||
KC_MS_BTN4, KC_MS_BTN2, KC_MS_UP, KC_MS_BTN1, | |||
KC_MS_BTN5, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, | |||
KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2 | |||
) | |||
}; | |||
// Standard encoder functionality | |||
void encoder_update_user(uint8_t index, bool clockwise) { | |||
// Process encoder rotational movements | |||
if (index == 0) { /* First encoder */ | |||
if (clockwise) { | |||
tap_code(KC_AUDIO_VOL_DOWN); | |||
} else { | |||
tap_code(KC_AUDIO_VOL_UP); | |||
} | |||
} else if (index == 1) { /* Second encoder */ | |||
if (clockwise) { | |||
tap_code(KC_MS_WH_UP); | |||
} else { | |||
tap_code(KC_MS_WH_DOWN); | |||
} | |||
} | |||
} | |||
// Encoder press / tilt event handling | |||
// the core lynepad implementation will update the below variables on each matrix scan | |||
// Update the various codes below for customizing the tilt / push config | |||
extern int16_t enc1Center; | |||
extern int16_t enc1CenterPrev; | |||
extern int16_t enc2Center; | |||
extern int16_t enc2CenterPrev; | |||
extern int16_t enc2Up; | |||
extern int16_t enc2UpPrev; | |||
extern int16_t enc2Down; | |||
extern int16_t enc2DownPrev; | |||
extern int16_t enc2Left; | |||
extern int16_t enc2LeftPrev; | |||
extern int16_t enc2Right; | |||
extern int16_t enc2RightPrev; | |||
void matrix_scan_user(void) { | |||
if (enc1Center != enc1CenterPrev) { | |||
if (enc1Center < ENC_TILT_THRESHOLD) { | |||
} | |||
else { | |||
reset_keyboard(); | |||
} | |||
} | |||
if (enc2Center != enc2CenterPrev) { | |||
if (enc2Center < ENC_TILT_THRESHOLD) { | |||
register_code16(KC_MS_BTN3); | |||
} | |||
else { | |||
unregister_code16(KC_MS_BTN3); | |||
} | |||
/* | |||
* Encoder sets ALL values when center is pressed so bail out at this point\ | |||
* to avoid the rest of the encoder buttons registering events | |||
*/ | |||
return; | |||
} | |||
if (enc2Up != enc2UpPrev) { | |||
if (enc2Up < ENC_TILT_THRESHOLD) { | |||
} | |||
else { | |||
rgblight_increase_val_noeeprom(); | |||
} | |||
} | |||
if (enc2Down != enc2DownPrev) { | |||
if (enc2Down < ENC_TILT_THRESHOLD) { | |||
} | |||
else { | |||
rgblight_decrease_val_noeeprom(); | |||
} | |||
} | |||
if (enc2Left != enc2LeftPrev) { | |||
if (enc2Left < ENC_TILT_THRESHOLD) { | |||
} | |||
else { | |||
rgblight_toggle_noeeprom(); | |||
} | |||
} | |||
if (enc2Right != enc2RightPrev) { | |||
if (enc2Right < ENC_TILT_THRESHOLD) { | |||
} | |||
else { | |||
rgblight_step_noeeprom(); | |||
} | |||
} | |||
} |
@ -0,0 +1 @@ | |||
# The default keymap for lynepad |
@ -0,0 +1,58 @@ | |||
/* | |||
Copyright 2020 KemoNine | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "lynepad.h" | |||
void keyboard_pre_init_kb(void) { | |||
// Encoder pins | |||
setPinInput(PIN_TW_SW); | |||
setPinInput(PIN_RJ_SW); | |||
setPinInput(PIN_RJ_DIR_A); | |||
setPinInput(PIN_RJ_DIR_C); | |||
setPinInput(PIN_RJ_DIR_B); | |||
setPinInput(PIN_RJ_DIR_D); | |||
keyboard_pre_init_user(); | |||
} | |||
int16_t enc1Center = 1; | |||
int16_t enc1CenterPrev = 1; | |||
int16_t enc2Center = 1; | |||
int16_t enc2CenterPrev = 1; | |||
int16_t enc2Up = 1; | |||
int16_t enc2UpPrev = 1; | |||
int16_t enc2Down = 1; | |||
int16_t enc2DownPrev = 1; | |||
int16_t enc2Left = 1; | |||
int16_t enc2LeftPrev = 1; | |||
int16_t enc2Right = 1; | |||
int16_t enc2RightPrev = 1; | |||
void matrix_scan_kb(void) { | |||
enc1CenterPrev = enc1Center; | |||
enc1Center = readPin(PIN_TW_SW); | |||
enc2CenterPrev = enc2Center; | |||
enc2Center = readPin(PIN_RJ_SW); | |||
enc2UpPrev = enc2Up; | |||
enc2Up = readPin(PIN_RJ_DIR_A); | |||
enc2DownPrev = enc2Down; | |||
enc2Down = readPin(PIN_RJ_DIR_C); | |||
enc2LeftPrev = enc2Left; | |||
enc2Left = readPin(PIN_RJ_DIR_B); | |||
enc2RightPrev = enc2Right; | |||
enc2Right = readPin(PIN_RJ_DIR_D); | |||
// Ensure any user customizations are called (for some reason this wasn't happening by default) | |||
matrix_scan_user(); | |||
} |
@ -0,0 +1,37 @@ | |||
/* Copyright 2020 KemoNine | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k20, k21, k22 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03 }, \ | |||
{ k10, k11, k12, k13 }, \ | |||
{ k20, k21, k22, KC_NO } \ | |||
} |
@ -0,0 +1,13 @@ | |||
# QVEX Lynepad | |||
Macro pad with 11 keys and 2 rotary encoders. | |||
* Keyboard Maintainer: [KemoNine](https://git.kemonine.info/kemonine/keyboard) | |||
* Hardware Supported: QVEX Lynepad: macro keypad | |||
* Hardware Availability: Tindie [Keyboard Kit](https://www.tindie.com/products/qvex_tech/qvex-lynepad-macro-keypad/) | |||
Make example for this macro pad (after setting up your build environment): | |||
make qvex/lynepad:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,21 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
ENCODER_ENABLE = yes # Enable the encoders |
@ -0,0 +1,7 @@ | |||
# QVEX | |||
QVEX is a keyboard vendor based in Czechia | |||
## Online Stores | |||
**Website:** https://www.tindie.com/products/qvex_tech/qvex-lynepad-macro-keypad/ |