Update keyboards/mechlovin/zed65/rgb/config.h

Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>

keyboards/mechlovin/zed65/rgb/config.h

@@ -18,13 +18,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #ifdef RGBLIGHT_ENABLE
-#define WS2812_PWM_DRIVER PWMD3  // default: PWMD2
-#define WS2812_PWM_CHANNEL 1  // default: 2
-#define WS2812_PWM_PAL_MODE 6  // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM3_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_PWM_DRIVER PWMD3  // default: PWMD2
+#    define WS2812_PWM_CHANNEL 1  // default: 2
+#    define WS2812_PWM_PAL_MODE 6  // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+//#    define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
+#    define WS2812_DMA_STREAM STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM3_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
 #endif
 
 #ifdef RGB_MATRIX_ENABLE