* add rabbit_capture_plan * update keymap.c * Update keyboards/rabbit_capture_plan/paw3204.c Co-authored-by: Drashna Jaelre <drashna@live.com> * move bto_to keymap * remove paw3204 Co-authored-by: Drashna Jaelre <drashna@live.com>pull/10139/head
@ -0,0 +1,148 @@ | |||
/* | |||
Copyright 2020 kakunpc | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter | |||
VID & PID are lisenced from microchip sublisence program, Don't use other project! */ | |||
#define VENDOR_ID 0x04D8 | |||
#define PRODUCT_ID 0xEB59 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER kakunpc | |||
#define PRODUCT rabbit_capture_plan | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 | |||
//#define BACKLIGHT_PIN B7 | |||
//#define BACKLIGHT_LEVELS 3 | |||
//#define BACKLIGHT_BREATHING | |||
#define RGB_DI_PIN D3 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLED_SPLIT {32, 37} | |||
# define RGBLED_NUM 69 | |||
# define RGBLIGHT_HUE_STEP 8 | |||
# define RGBLIGHT_SAT_STEP 8 | |||
# define RGBLIGHT_VAL_STEP 8 | |||
# define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ | |||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
# define RGBLIGHT_ANIMATIONS | |||
/*== or choose animations ==*/ | |||
//# define RGBLIGHT_EFFECT_BREATHING | |||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
//# define RGBLIGHT_EFFECT_SNAKE | |||
//# define RGBLIGHT_EFFECT_KNIGHT | |||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,310 @@ | |||
{ | |||
"keyboard_name": "rabbit_capture_plan", | |||
"url": "https://kakunpc.booth.pm/", | |||
"maintainer": "kakunpc", | |||
"width": 20.25, | |||
"height": 5.25, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ | |||
"x": 0.66, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 1.6600000000000001, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 2.97, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 3.97, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 4.97, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 5.97, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 6.97, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 9.87, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 10.87, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 11.87, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 12.87, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 14.32, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 15.32, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 16.32, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 17.32, | |||
"y": 0 | |||
}, | |||
{ | |||
"x": 0.53, | |||
"y": 1, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"x": 2.03, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 3.47, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 4.47, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 5.47, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 6.47, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 7.47, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 9.37, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 10.37, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 11.37, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 12.37, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 13.97, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 14.97, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 15.97, | |||
"y": 1 | |||
}, | |||
{ | |||
"x": 16.97, | |||
"y": 1, | |||
"w": 1.5 | |||
}, | |||
{ | |||
"x": 0.39, | |||
"y": 2, | |||
"w": 1.75 | |||
}, | |||
{ | |||
"x": 2.14, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 3.72, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 4.72, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 5.72, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 6.72, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 7.72, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 9.62, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 10.62, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 11.62, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 12.62, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 14.34, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 15.34, | |||
"y": 2 | |||
}, | |||
{ | |||
"x": 16.34, | |||
"y": 2, | |||
"w": 2.25 | |||
}, | |||
{ | |||
"x": 0.25, | |||
"y": 3, | |||
"w": 2.25 | |||
}, | |||
{ | |||
"x": 2.5, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 4.22, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 5.22, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 6.22, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 7.22, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 9.12, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 10.12, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 11.12, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 12.12, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 13.97, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 14.97, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 15.97, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 16.97, | |||
"y": 3 | |||
}, | |||
{ | |||
"x": 18.25, | |||
"y": 3.25 | |||
}, | |||
{ | |||
"x": 0.5, | |||
"y": 4, | |||
"w": 1.25 | |||
}, | |||
{ | |||
"x": 1.75, | |||
"y": 4, | |||
"w": 1.25 | |||
}, | |||
{ | |||
"x": 4.72, | |||
"y": 4 | |||
}, | |||
{ | |||
"x": 5.72, | |||
"y": 4, | |||
"w": 2 | |||
}, | |||
{ | |||
"x": 7.72, | |||
"y": 4 | |||
}, | |||
{ | |||
"x": 9.6, | |||
"y": 4, | |||
"w": 2.75 | |||
}, | |||
{ | |||
"x": 12.35, | |||
"y": 4 | |||
}, | |||
{ | |||
"x": 17.25, | |||
"y": 4.25 | |||
}, | |||
{ | |||
"x": 18.25, | |||
"y": 4.25 | |||
}, | |||
{ | |||
"x": 19.25, | |||
"y": 4.25 | |||
} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,39 @@ | |||
/* Copyright 2020 kakunpc | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layers{ | |||
_BASE, | |||
_FN | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT_all( | |||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, | |||
KC_LCTRL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_RIGHT | |||
), | |||
[_FN] = LAYOUT_all( | |||
RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||
_______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,_______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for rabbit_capture_plan |
@ -0,0 +1,48 @@ | |||
/* Copyright 2020 kakunpc | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[0] = LAYOUT_all( | |||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, | |||
KC_LCTRL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_RIGHT | |||
), | |||
[1] = LAYOUT_all( | |||
RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||
_______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,_______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[2] = LAYOUT_all( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[3] = LAYOUT_all( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The via keymap for rabbit_capture_plan |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,17 @@ | |||
/* Copyright 2020 kakunpc | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rabbit_capture_plan.h" |
@ -0,0 +1,47 @@ | |||
/* Copyright 2020 kakunpc | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_all( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, R07, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, R17, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, R36, R37, R38, \ | |||
L40, L41, L42, L43, L44, R40, R41, R42, R43, R44 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06, KC_NO }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16, KC_NO }, \ | |||
{ L20, L21, L22, L23, L24, L25, KC_NO, KC_NO }, \ | |||
{ L30, L31, L32, L33, L34, L35, KC_NO, KC_NO }, \ | |||
{ L40, L41, L42, L43, L44, L26, KC_NO, KC_NO }, \ | |||
{ R00, R01, R02, R03, R04, R05, R06, R07 }, \ | |||
{ R10, R11, R12, R13, R14, R15, R16, R17 }, \ | |||
{ R20, R21, R22, R23, R24, R25, R26, KC_NO }, \ | |||
{ R30, R31, R32, R33, R34, R35, R36, R37 }, \ | |||
{ R38, R40, R41, R42, R43, R44, KC_NO, KC_NO } \ | |||
} |
@ -0,0 +1,19 @@ | |||
# rabbit_capture_plan | |||
![rabbit_capture_plan](https://i.gyazo.com/eb25048b17906f897253e8be18db001c.jpg) | |||
This is 70 keys split keyboard with trackball. | |||
* Keyboard Maintainer: [kakunpc](https://github.com/kakunpc) | |||
* Hardware Supported: rabbit capture plan pcb | |||
* Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/)) | |||
Make example for this keyboard (after setting up your build environment): | |||
make rabbit_capture_plan:default | |||
Flashing example for this keyboard: | |||
make rabbit_capture_plan:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,24 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes | |||
OLED_DRIVER_ENABLE = no |