add Pinky (https://github.com/tamanishi/Pinky3) keyboardpull/4786/head
@ -0,0 +1 @@ | |||
#include "pinky.h" |
@ -0,0 +1,46 @@ | |||
#pragma once | |||
#include "../pinky.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
//void promicro_bootloader_jmp(bool program); | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, R30, R31, R32, R33 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||
{ KC_NO, KC_NO, KC_NO, L30, L31, L32, L33 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ KC_NO, KC_NO, KC_NO, R33, R32, R31, R30 } \ | |||
} | |||
#define LAYOUT_kc( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, R30, R31, R32, R33 \ | |||
) \ | |||
LAYOUT( \ | |||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ | |||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ | |||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ | |||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \ | |||
) |
@ -0,0 +1,246 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x3060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER tamanishi | |||
#define PRODUCT Pinky | |||
#define DESCRIPTION A split keyboard with 3 or 4 x7 vertically staggered keys and 4 thumb keys | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 7 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6 } | |||
// wiring of each half | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
// #define RGB_DI_PIN E2 | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLED_NUM 16 | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
// #define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
// #define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
// #define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* | |||
* HD44780 LCD Display Configuration | |||
*/ | |||
/* | |||
#define LCD_LINES 2 //< number of visible lines of the display | |||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||
#if LCD_IO_MODE | |||
#define LCD_PORT PORTB //< port for the LCD lines | |||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||
#define LCD_RS_PIN 3 //< pin for RS line | |||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||
#define LCD_RW_PIN 2 //< pin for RW line | |||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||
#define LCD_E_PIN 1 //< pin for Enable line | |||
#endif | |||
*/ | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,31 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS | |||
#define USE_SERIAL_PD2 | |||
#define TAPPING_FORCE_HOLD | |||
#define TAPPING_TERM 200 | |||
#define RETRO_TAPPPING |
@ -0,0 +1,134 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _QWERTY 0 | |||
#define _LOWER 3 | |||
#define _RAISE 4 | |||
#define _ADJUST 16 | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
LOWER, | |||
RAISE, | |||
ADJUST | |||
}; | |||
#define ________ KC_TRNS | |||
#define XXXXXXXX KC_NO | |||
#define KC_LOWER LOWER | |||
#define KC_RAISE RAISE | |||
#define KC_ADJ ADJUST | |||
#define KC_CTLTB CTL_T(KC_TAB) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT( | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LPRN, KC_RPRN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_CTLTB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LBRC, KC_RBRC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ADJ, KC_ADJ, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_LALT, KC_LOWER, KC_LGUI, KC_SPC, KC_SPC, KC_RGUI, KC_RAISE, KC_RALT \ | |||
//`---------------------------------------' `---------------------------------------' | |||
), | |||
[_LOWER] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, ________, ________, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, KC_MINS, KC_EQL, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________ \ | |||
//`---------------------------------------' `---------------------------------------' | |||
), | |||
[_RAISE] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, ________, ________, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, KC_MINS, KC_EQL, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________ \ | |||
//`---------------------------------------' `---------------------------------------' | |||
), | |||
[_ADJUST] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
________, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LCBR, KC_RCBR, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, KC_F11, KC_F12, ________, ________, ________, KC_LCBR, KC_RCBR, KC_HOME, KC_PGDN, KC_PGUP, KC_END, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________ \ | |||
//`---------------------------------------' `---------------------------------------' | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
if (record->event.pressed) { | |||
// set_timelog(); | |||
} | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
return false; | |||
break; | |||
case LOWER: | |||
if (record->event.pressed) { | |||
layer_on(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
break; | |||
case RAISE: | |||
if (record->event.pressed) { | |||
layer_on(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
return false; | |||
break; | |||
} | |||
return true; | |||
} | |||
@ -0,0 +1,18 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
SWAP_HANDS_ENABLE = no # Enable one-hand typing |
@ -0,0 +1 @@ | |||
# empty |
@ -0,0 +1 @@ | |||
#include "pinky.h" |
@ -0,0 +1,51 @@ | |||
#pragma once | |||
#include "../pinky.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
//void promicro_bootloader_jmp(bool program); | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ | |||
L40, L41, L42, L43, R40, R41, R42, R43 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||
{ KC_NO, KC_NO, KC_NO, L40, L41, L42, L43 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||
{ R36, R35, R34, R33, R32, R31, R30 }, \ | |||
{ KC_NO, KC_NO, KC_NO, R43, R42, R41, R40 } \ | |||
} | |||
#define LAYOUT_kc( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ | |||
L40, L41, L42, L43, R40, R41, R42, R43 \ | |||
) \ | |||
LAYOUT( \ | |||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ | |||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ | |||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ | |||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \ | |||
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##R40, KC_##R41, KC_##R42, KC_##R43 \ | |||
) |
@ -0,0 +1,246 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x3060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER tamanishi | |||
#define PRODUCT Pinky | |||
#define DESCRIPTION A split keyboard with 3 or 4 x7 vertically staggered keys and 4 thumb keys | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 7 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
// wiring of each half | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
// #define RGB_DI_PIN E2 | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLED_NUM 16 | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
// #define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
// #define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
// #define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* | |||
* HD44780 LCD Display Configuration | |||
*/ | |||
/* | |||
#define LCD_LINES 2 //< number of visible lines of the display | |||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||
#if LCD_IO_MODE | |||
#define LCD_PORT PORTB //< port for the LCD lines | |||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||
#define LCD_RS_PIN 3 //< pin for RS line | |||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||
#define LCD_RW_PIN 2 //< pin for RW line | |||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||
#define LCD_E_PIN 1 //< pin for Enable line | |||
#endif | |||
*/ | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,31 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
//#define USE_MATRIX_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS | |||
#define USE_SERIAL_PD2 | |||
#define TAPPING_FORCE_HOLD | |||
#define TAPPING_TERM 200 | |||
#define RETRO_TAPPPING |
@ -0,0 +1,154 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _QWERTY 0 | |||
#define _LOWER 3 | |||
#define _RAISE 4 | |||
#define _ADJUST 16 | |||
// Defines the keycodes used by our macros in process_record_user | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
LOWER, | |||
RAISE, | |||
ADJUST | |||
}; | |||
#define ________ KC_TRNS | |||
#define XXXXXXXX KC_NO | |||
#define KC_LOWER LOWER | |||
#define KC_RAISE RAISE | |||
#define KC_ADJ ADJUST | |||
#define KC_CTLTB CTL_T(KC_TAB) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LPRN, KC_RPRN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_CTLTB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LCBR, KC_RCBR, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ADJ, KC_ADJ, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
KC_LALT, KC_LOWER, KC_LGUI, KC_SPC, KC_SPC, KC_RGUI, KC_RAISE, KC_RALT \ | |||
//`---------------------------------------' `---------------------------------------' | |||
), | |||
[_LOWER] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
KC_GRV, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, KC_MINS, KC_EQL, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________ \ | |||
//`---------------------------------------' `---------------------------------------' | |||
), | |||
[_RAISE] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
KC_GRV, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, KC_MINS, KC_EQL, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________ \ | |||
//`---------------------------------------' `---------------------------------------' | |||
), | |||
[_ADJUST] = LAYOUT( \ | |||
//,---------------------------------------------------------------------. ,---------------------------------------------------------------------. | |||
________, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, ________, ________, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, KC_F11, KC_F12, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, KC_HOME, KC_PGDN, KC_PGUP, KC_END, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________, ________,\ | |||
//|---------+---------+---------+---------+---------+---------+---------| |---------+---------+---------+---------+---------+---------+---------| | |||
________, ________, ________, ________, ________, ________, ________, ________ \ | |||
//`---------------------------------------' `---------------------------------------' | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
if (record->event.pressed) { | |||
// set_timelog(); | |||
} | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
return false; | |||
break; | |||
case LOWER: | |||
if (record->event.pressed) { | |||
layer_on(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
break; | |||
case RAISE: | |||
if (record->event.pressed) { | |||
layer_on(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
return false; | |||
break; | |||
} | |||
return true; | |||
} | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
} |
@ -0,0 +1,18 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
SWAP_HANDS_ENABLE = no # Enable one-hand typing |
@ -0,0 +1 @@ | |||
# empty |
@ -0,0 +1,20 @@ | |||
/* | |||
Copyright 2018 'Masayuki Sunahara' | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" |
@ -0,0 +1,43 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "pinky.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} |
@ -0,0 +1,29 @@ | |||
/* Copyright 2018 'Masayuki Sunahara' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef PINKY_H | |||
#define PINKY_H | |||
#include "quantum.h" | |||
#ifdef KEYBOARD_pinky_3 | |||
#include "3.h" | |||
#endif | |||
#ifdef KEYBOARD_pinky_4 | |||
#include "4.h" | |||
#endif | |||
#endif |
@ -0,0 +1,25 @@ | |||
Pinky | |||
=== | |||
A split keyboard with 3 or 4 x7 vertically staggered keys and 4 thumb keys. | |||
An idea is inspired from [crkbd](https://github.com/foostan/crkbd), [Lily58](https://github.com/kata0510/Lily58), [Ergo42](https://github.com/Biacco42/Ergo42) and [Helix](https://github.com/MakotoKurauchi/helix). | |||
Keyboard Maintainer: [Masayuki Sunahara](https://github.com/tamanishi/) [@tamanishi](https://twitter.com/tamanishi) | |||
Hardware Supported: Pinky3(3rows) or Pinky4(4rows) PCB, Pro Micro | |||
Hardware Availability: [Pinky3 PCB & Case Data](https://github.com/tamanishi/Pinky3), [Pinky4 PCB & Case Data](https://github.com/tamanishi/Pinky4) | |||
Make example for pinky(3rows) keyboard (after setting up your build environment): | |||
make pinky:default | |||
or | |||
make pinky/3:default | |||
Make example for pinky(4rows) keyboard (after setting up your build environment): | |||
make pinky/4:default | |||
Install example for pinky(3rows) keyboard: | |||
make pinky:default:avrdude | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,85 @@ | |||
# MCU name | |||
#MCU = at90usb1286 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = caterina | |||
# If you don't know the bootloader type, then you can specify the | |||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||
SPLIT_KEYBOARD = yes | |||
DEFAULT_FOLDER = pinky/3 |