* New keyboard added Zen is a split ortholinear currently in group buy. * remove bad keymap Keymap was throwing errors * remove other bad keymap I should have checked these before haha * small fix to update folder name * renamed temp * renamed to zen * update folder name * Slim down matrix code Suggested by drashna * move KC_NO * Update keymap * change from rev2 to rev1pull/2356/head
@ -0,0 +1,29 @@ | |||
/* | |||
Copyright 2017 Danny Nguyen <danny@hexwire.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
#endif // CONFIG_H | |||
#undef RGBLED_NUM | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 16 | |||
#define TAPPING_TERM 100 |
@ -0,0 +1,41 @@ | |||
/* | |||
Copyright 2017 Danny Nguyen <danny@hexwire.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_USER_H | |||
#define CONFIG_USER_H | |||
#include "config_common.h" | |||
/* Use I2C or Serial, not both */ | |||
#define USE_SERIAL | |||
// #define USE_I2C | |||
/* Select hand configuration */ | |||
#define MASTER_LEFT | |||
// #define MASTER_RIGHT | |||
// #define EE_HANDS | |||
#undef RGBLED_NUM | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 16 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif |
@ -0,0 +1,103 @@ | |||
#include "zen.h" | |||
#include "action_layer.h" | |||
#include "eeconfig.h" | |||
extern keymap_config_t keymap_config; | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _QWERTY 0 | |||
#define _NAV 2 | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
NAV, | |||
}; | |||
// Fillers to make layering more clear | |||
#define _______ KC_TRNS | |||
#define XXXXXXX KC_NO | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Qwerty | |||
* ,-----------------------------------------. .-----------------------------------------. | |||
* | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | | |||
* |------+------+------+------+------+------+------..-----+------+------+------+------+------+------| | |||
* | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter|Space | NAV | - | = | PGUP | PGDN | | |||
* `------------------------------------------------''-----------------------------------------------' | |||
*/ | |||
[_QWERTY] = KEYMAP( \ | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ | |||
LT(_NAV, KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ | |||
KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, MO(_NAV), KC_SPC, KC_DEL, KC_ENT, KC_SPACE, MO(_NAV), KC_MINS, KC_EQL, KC_PGUP, KC_PGDN \ | |||
), | |||
/* NAV | |||
* ,-----------------------------------------. .-----------------------------------------. | |||
* | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | |RGBSAI|RGBVAI|RGBSAD| RESET| [ | | ] | Pgup | Up | Pgdn |Insert| Home | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* | |RGBHUD|RGBVAD|RGBHUI| | | | | Left | Down | Right|Delete| End | | |||
* |------+------+------+------+------+------| |------+------+------+------+------+------| | |||
* |Shift | | | | | | | NKRO | | | Pause| Back | Next | | |||
* |------+------+------+------+------+------+------..-----+------+------+------+------+------+------| | |||
* | Ctrl | GUI | Alt |RGBMOD| | | || | | | | Mute | VOLUP| VOLDN| | |||
* `------------------------------------------------''-----------------------------------------------' | |||
*/ | |||
[_NAV] = KEYMAP( \ | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 , \ | |||
KC_TRNS, RGB_SAI, RGB_VAI, RGB_SAD, RESET, KC_LBRC, KC_RBRC, KC_PGUP, KC_UP, KC_PGDN, KC_INS, KC_HOME , \ | |||
KC_TRNS, RGB_HUD, RGB_VAD, RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_END , \ | |||
KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MAGIC_TOGGLE_NKRO, KC_TRNS, KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT , \ | |||
KC_LCTL, KC_LGUI, KC_LALT, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLU, KC_VOLD \ | |||
), | |||
}; | |||
#ifdef AUDIO_ENABLE | |||
float tone_qwerty[][2] = SONG(QWERTY_SOUND); | |||
float tone_colemak[][2] = SONG(COLEMAK_SOUND); | |||
#endif | |||
void persistant_default_layer_set(uint16_t default_layer) { | |||
eeconfig_update_default_layer(default_layer); | |||
default_layer_set(default_layer); | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
#ifdef AUDIO_ENABLE | |||
PLAY_NOTE_ARRAY(tone_qwerty, false, 0); | |||
#endif | |||
persistant_default_layer_set(1UL<<_QWERTY); | |||
} | |||
return false; | |||
break; | |||
//case COLEMAK: | |||
//if (record->event.pressed) { | |||
//#ifdef AUDIO_ENABLE | |||
//PLAY_NOTE_ARRAY(tone_colemak, false, 0); | |||
//#endif | |||
//persistant_default_layer_set(1UL<<_COLEMAK); | |||
//} | |||
//return false; | |||
//break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1,6 @@ | |||
RGBLIGHT_ENABLE = yes | |||
BACKLIGHT_ENABLE = yes | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif |
@ -0,0 +1,466 @@ | |||
/* | |||
Copyright 2017 Danny Nguyen <danny@keeb.io> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
/* | |||
* scan matrix | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/io.h> | |||
#include "wait.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "matrix.h" | |||
#include "split_util.h" | |||
#include "pro_micro.h" | |||
#include "config.h" | |||
#include "timer.h" | |||
#include "backlight.h" | |||
#ifdef USE_I2C | |||
# include "i2c.h" | |||
#else // USE_SERIAL | |||
# include "serial.h" | |||
#endif | |||
#ifndef DEBOUNCING_DELAY | |||
# define DEBOUNCING_DELAY 5 | |||
#endif | |||
#if (DEBOUNCING_DELAY > 0) | |||
static uint16_t debouncing_time; | |||
static bool debouncing = false; | |||
#endif | |||
#if (MATRIX_COLS <= 8) | |||
# define print_matrix_header() print("\nr/c 01234567\n") | |||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop(matrix[i]) | |||
# define ROW_SHIFTER ((uint8_t)1) | |||
#else | |||
# error "Currently only supports 8 COLS" | |||
#endif | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
#define ERROR_DISCONNECT_COUNT 5 | |||
#define SERIAL_LED_ADDR 0x00 | |||
#define ROWS_PER_HAND (MATRIX_ROWS/2) | |||
static uint8_t error_count = 0; | |||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; | |||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; | |||
/* matrix state(1:on, 0:off) */ | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
#if (DIODE_DIRECTION == COL2ROW) | |||
static void init_cols(void); | |||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); | |||
static void unselect_rows(void); | |||
static void select_row(uint8_t row); | |||
static void unselect_row(uint8_t row); | |||
#elif (DIODE_DIRECTION == ROW2COL) | |||
static void init_rows(void); | |||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); | |||
static void unselect_cols(void); | |||
static void unselect_col(uint8_t col); | |||
static void select_col(uint8_t col); | |||
#endif | |||
__attribute__ ((weak)) | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_kb(void) { | |||
matrix_scan_user(); | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_init_user(void) { | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_user(void) { | |||
} | |||
inline | |||
uint8_t matrix_rows(void) | |||
{ | |||
return MATRIX_ROWS; | |||
} | |||
inline | |||
uint8_t matrix_cols(void) | |||
{ | |||
return MATRIX_COLS; | |||
} | |||
void matrix_init(void) | |||
{ | |||
debug_enable = true; | |||
debug_matrix = true; | |||
debug_mouse = true; | |||
// initialize row and col | |||
unselect_rows(); | |||
init_cols(); | |||
TX_RX_LED_INIT; | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = 0; | |||
matrix_debouncing[i] = 0; | |||
} | |||
} | |||
uint8_t _matrix_scan(void) | |||
{ | |||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND); | |||
#if (DIODE_DIRECTION == COL2ROW) | |||
// Set row, read cols | |||
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { | |||
# if (DEBOUNCING_DELAY > 0) | |||
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); | |||
if (matrix_changed) { | |||
debouncing = true; | |||
debouncing_time = timer_read(); | |||
PORTD ^= (1 << 2); | |||
} | |||
# else | |||
read_cols_on_row(matrix+offset, current_row); | |||
# endif | |||
} | |||
#elif (DIODE_DIRECTION == ROW2COL) | |||
// Set col, read rows | |||
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { | |||
# if (DEBOUNCING_DELAY > 0) | |||
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); | |||
if (matrix_changed) { | |||
debouncing = true; | |||
debouncing_time = timer_read(); | |||
} | |||
# else | |||
read_rows_on_col(matrix+offset, current_col); | |||
# endif | |||
} | |||
#endif | |||
# if (DEBOUNCING_DELAY > 0) | |||
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { | |||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { | |||
matrix[i+offset] = matrix_debouncing[i+offset]; | |||
} | |||
debouncing = false; | |||
} | |||
# endif | |||
return 1; | |||
} | |||
#ifdef USE_I2C | |||
// Get rows from other half over i2c | |||
int i2c_transaction(void) { | |||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); | |||
if (err) goto i2c_error; | |||
// start of matrix stored at 0x00 | |||
err = i2c_master_write(0x00); | |||
if (err) goto i2c_error; | |||
// Start read | |||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); | |||
if (err) goto i2c_error; | |||
if (!err) { | |||
int i; | |||
for (i = 0; i < ROWS_PER_HAND-1; ++i) { | |||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); | |||
} | |||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); | |||
i2c_master_stop(); | |||
} else { | |||
i2c_error: // the cable is disconnceted, or something else went wrong | |||
i2c_reset_state(); | |||
return err; | |||
} | |||
return 0; | |||
} | |||
#else // USE_SERIAL | |||
int serial_transaction(void) { | |||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||
if (serial_update_buffers()) { | |||
return 1; | |||
} | |||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||
matrix[slaveOffset+i] = serial_slave_buffer[i]; | |||
} | |||
#ifdef BACKLIGHT_ENABLE | |||
// Write backlight level for slave to read | |||
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level(); | |||
#endif | |||
return 0; | |||
} | |||
#endif | |||
uint8_t matrix_scan(void) | |||
{ | |||
uint8_t ret = _matrix_scan(); | |||
#ifdef USE_I2C | |||
if( i2c_transaction() ) { | |||
#else // USE_SERIAL | |||
if( serial_transaction() ) { | |||
#endif | |||
// turn on the indicator led when halves are disconnected | |||
TXLED1; | |||
error_count++; | |||
if (error_count > ERROR_DISCONNECT_COUNT) { | |||
// reset other half if disconnected | |||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||
matrix[slaveOffset+i] = 0; | |||
} | |||
} | |||
} else { | |||
// turn off the indicator led on no error | |||
TXLED0; | |||
error_count = 0; | |||
} | |||
return ret; | |||
} | |||
void matrix_slave_scan(void) { | |||
_matrix_scan(); | |||
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; | |||
#ifdef USE_I2C | |||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||
i2c_slave_buffer[i] = matrix[offset+i]; | |||
} | |||
#else // USE_SERIAL | |||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||
serial_slave_buffer[i] = matrix[offset+i]; | |||
} | |||
#ifdef BACKLIGHT_ENABLE | |||
// Read backlight level sent from master and update level on slave | |||
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); | |||
#endif | |||
#endif | |||
} | |||
bool matrix_is_modified(void) | |||
{ | |||
if (debouncing) return false; | |||
return true; | |||
} | |||
inline | |||
bool matrix_is_on(uint8_t row, uint8_t col) | |||
{ | |||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||
} | |||
inline | |||
matrix_row_t matrix_get_row(uint8_t row) | |||
{ | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) | |||
{ | |||
print("\nr/c 0123456789ABCDEF\n"); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
phex(row); print(": "); | |||
pbin_reverse16(matrix_get_row(row)); | |||
print("\n"); | |||
} | |||
} | |||
uint8_t matrix_key_count(void) | |||
{ | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += bitpop16(matrix[i]); | |||
} | |||
return count; | |||
} | |||
#if (DIODE_DIRECTION == COL2ROW) | |||
static void init_cols(void) | |||
{ | |||
for(uint8_t x = 0; x < MATRIX_COLS; x++) { | |||
uint8_t pin = col_pins[x]; | |||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||
} | |||
} | |||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) | |||
{ | |||
// Store last value of row prior to reading | |||
matrix_row_t last_row_value = current_matrix[current_row]; | |||
// Clear data in matrix row | |||
current_matrix[current_row] = 0; | |||
// Select row and wait for row selecton to stabilize | |||
select_row(current_row); | |||
wait_us(30); | |||
// For each col... | |||
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { | |||
// Select the col pin to read (active low) | |||
uint8_t pin = col_pins[col_index]; | |||
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); | |||
// Populate the matrix row with the state of the col pin | |||
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); | |||
} | |||
// Unselect row | |||
unselect_row(current_row); | |||
return (last_row_value != current_matrix[current_row]); | |||
} | |||
static void select_row(uint8_t row) | |||
{ | |||
uint8_t pin = row_pins[row]; | |||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT | |||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW | |||
} | |||
static void unselect_row(uint8_t row) | |||
{ | |||
uint8_t pin = row_pins[row]; | |||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||
} | |||
static void unselect_rows(void) | |||
{ | |||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { | |||
uint8_t pin = row_pins[x]; | |||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||
} | |||
} | |||
#elif (DIODE_DIRECTION == ROW2COL) | |||
static void init_rows(void) | |||
{ | |||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { | |||
uint8_t pin = row_pins[x]; | |||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||
} | |||
} | |||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) | |||
{ | |||
bool matrix_changed = false; | |||
// Select col and wait for col selecton to stabilize | |||
select_col(current_col); | |||
wait_us(30); | |||
// For each row... | |||
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) | |||
{ | |||
// Store last value of row prior to reading | |||
matrix_row_t last_row_value = current_matrix[row_index]; | |||
// Check row pin state | |||
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) | |||
{ | |||
// Pin LO, set col bit | |||
current_matrix[row_index] |= (ROW_SHIFTER << current_col); | |||
} | |||
else | |||
{ | |||
// Pin HI, clear col bit | |||
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); | |||
} | |||
// Determine if the matrix changed state | |||
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) | |||
{ | |||
matrix_changed = true; | |||
} | |||
} | |||
// Unselect col | |||
unselect_col(current_col); | |||
return matrix_changed; | |||
} | |||
static void select_col(uint8_t col) | |||
{ | |||
uint8_t pin = col_pins[col]; | |||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT | |||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW | |||
} | |||
static void unselect_col(uint8_t col) | |||
{ | |||
uint8_t pin = col_pins[col]; | |||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||
} | |||
static void unselect_cols(void) | |||
{ | |||
for(uint8_t x = 0; x < MATRIX_COLS; x++) { | |||
uint8_t pin = col_pins[x]; | |||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||
} | |||
} | |||
#endif |
@ -0,0 +1,12 @@ | |||
Zen Keyboard | |||
==== | |||
A split ergo keyboard with a few goals in mind: | |||
- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick. | |||
- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholiniear, Atreus62, and Ergodox, this is the best layout for gaming and typing. | |||
- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder. | |||
- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume. | |||
A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/) | |||
Maintained by u/legonut3 |
@ -0,0 +1,91 @@ | |||
/* | |||
Copyright 2017 Danny Nguyen <danny@hexwire.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef REV1_CONFIG_H | |||
#define REV1_CONFIG_H | |||
#include QMK_KEYBOARD_CONFIG_H | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xCEEB | |||
#define PRODUCT_ID 0x1256 | |||
#define DEVICE_VER 0x0200 | |||
#define MANUFACTURER Legonut | |||
#define PRODUCT Project Zen | |||
#define DESCRIPTION Split gaming keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 7 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } | |||
#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, D4, B6 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
#define BACKLIGHT_PIN F4 | |||
#define BACKLIGHT_LEVELS 5 | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D1 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 16 // Number of LEDs | |||
#define ws2812_PORTREG PORTD | |||
#define ws2812_DDRREG DDRD | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,22 @@ | |||
#include "rev1.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
@ -0,0 +1,40 @@ | |||
#ifndef REV1_H | |||
#define REV1_H | |||
#include "zen.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
//void promicro_bootloader_jmp(bool program); | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ | |||
k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ | |||
k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ | |||
k30, k31, k32, k33, k34, k35, k85, k84, k83, k82, k81, k80, \ | |||
k40, k41, k42, k43, k44, k45, k46, k96, k95, k94, k93, k92, k91, k90 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, KC_NO }, \ | |||
{ k10, k11, k12, k13, k14, k15, KC_NO }, \ | |||
{ k20, k21, k22, k23, k24, k25, KC_NO }, \ | |||
{ k30, k31, k32, k33, k34, k35, KC_NO }, \ | |||
{ k40, k41, k42, k43, k44, k45, k46 }, \ | |||
{ k50, k51, k52, k53, k54, k55, KC_NO }, \ | |||
{ k60, k61, k62, k63, k64, k65, KC_NO }, \ | |||
{ k70, k71, k72, k73, k74, k75, KC_NO }, \ | |||
{ k80, k81, k82, k83, k84, k85, KC_NO }, \ | |||
{ k90, k91, k92, k93, k94, k95, k96 } \ | |||
} | |||
#endif |
@ -0,0 +1,2 @@ | |||
RGBLIGHT_ENABLE = yes | |||
BACKLIGHT_ENABLE = yes |
@ -0,0 +1,73 @@ | |||
SRC += matrix.c \ | |||
split_util.c \ | |||
serial.c | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Bootloader | |||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||
# different sizes, comment this out, and the correct address will be loaded | |||
# automatically (+60). See bootloader.mk for all options. | |||
BOOTLOADER = caterina | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
SUBPROJECT_rev1 = yes | |||
USE_I2C = no | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
CUSTOM_MATRIX = yes | |||
DEFAULT_FOLDER = zen/rev1 |
@ -0,0 +1,228 @@ | |||
/* | |||
* WARNING: be careful changing this code, it is very timing dependent | |||
*/ | |||
#ifndef F_CPU | |||
#define F_CPU 16000000 | |||
#endif | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#include <util/delay.h> | |||
#include <stdbool.h> | |||
#include "serial.h" | |||
#ifndef USE_I2C | |||
// Serial pulse period in microseconds. Its probably a bad idea to lower this | |||
// value. | |||
#define SERIAL_DELAY 24 | |||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; | |||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; | |||
#define SLAVE_DATA_CORRUPT (1<<0) | |||
volatile uint8_t status = 0; | |||
inline static | |||
void serial_delay(void) { | |||
_delay_us(SERIAL_DELAY); | |||
} | |||
inline static | |||
void serial_output(void) { | |||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK; | |||
} | |||
// make the serial pin an input with pull-up resistor | |||
inline static | |||
void serial_input(void) { | |||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; | |||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; | |||
} | |||
inline static | |||
uint8_t serial_read_pin(void) { | |||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); | |||
} | |||
inline static | |||
void serial_low(void) { | |||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; | |||
} | |||
inline static | |||
void serial_high(void) { | |||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; | |||
} | |||
void serial_master_init(void) { | |||
serial_output(); | |||
serial_high(); | |||
} | |||
void serial_slave_init(void) { | |||
serial_input(); | |||
// Enable INT0 | |||
EIMSK |= _BV(INT0); | |||
// Trigger on falling edge of INT0 | |||
EICRA &= ~(_BV(ISC00) | _BV(ISC01)); | |||
} | |||
// Used by the master to synchronize timing with the slave. | |||
static | |||
void sync_recv(void) { | |||
serial_input(); | |||
// This shouldn't hang if the slave disconnects because the | |||
// serial line will float to high if the slave does disconnect. | |||
while (!serial_read_pin()); | |||
serial_delay(); | |||
} | |||
// Used by the slave to send a synchronization signal to the master. | |||
static | |||
void sync_send(void) { | |||
serial_output(); | |||
serial_low(); | |||
serial_delay(); | |||
serial_high(); | |||
} | |||
// Reads a byte from the serial line | |||
static | |||
uint8_t serial_read_byte(void) { | |||
uint8_t byte = 0; | |||
serial_input(); | |||
for ( uint8_t i = 0; i < 8; ++i) { | |||
byte = (byte << 1) | serial_read_pin(); | |||
serial_delay(); | |||
_delay_us(1); | |||
} | |||
return byte; | |||
} | |||
// Sends a byte with MSB ordering | |||
static | |||
void serial_write_byte(uint8_t data) { | |||
uint8_t b = 8; | |||
serial_output(); | |||
while( b-- ) { | |||
if(data & (1 << b)) { | |||
serial_high(); | |||
} else { | |||
serial_low(); | |||
} | |||
serial_delay(); | |||
} | |||
} | |||
// interrupt handle to be used by the slave device | |||
ISR(SERIAL_PIN_INTERRUPT) { | |||
sync_send(); | |||
uint8_t checksum = 0; | |||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { | |||
serial_write_byte(serial_slave_buffer[i]); | |||
sync_send(); | |||
checksum += serial_slave_buffer[i]; | |||
} | |||
serial_write_byte(checksum); | |||
sync_send(); | |||
// wait for the sync to finish sending | |||
serial_delay(); | |||
// read the middle of pulses | |||
_delay_us(SERIAL_DELAY/2); | |||
uint8_t checksum_computed = 0; | |||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { | |||
serial_master_buffer[i] = serial_read_byte(); | |||
sync_send(); | |||
checksum_computed += serial_master_buffer[i]; | |||
} | |||
uint8_t checksum_received = serial_read_byte(); | |||
sync_send(); | |||
serial_input(); // end transaction | |||
if ( checksum_computed != checksum_received ) { | |||
status |= SLAVE_DATA_CORRUPT; | |||
} else { | |||
status &= ~SLAVE_DATA_CORRUPT; | |||
} | |||
} | |||
inline | |||
bool serial_slave_DATA_CORRUPT(void) { | |||
return status & SLAVE_DATA_CORRUPT; | |||
} | |||
// Copies the serial_slave_buffer to the master and sends the | |||
// serial_master_buffer to the slave. | |||
// | |||
// Returns: | |||
// 0 => no error | |||
// 1 => slave did not respond | |||
int serial_update_buffers(void) { | |||
// this code is very time dependent, so we need to disable interrupts | |||
cli(); | |||
// signal to the slave that we want to start a transaction | |||
serial_output(); | |||
serial_low(); | |||
_delay_us(1); | |||
// wait for the slaves response | |||
serial_input(); | |||
serial_high(); | |||
_delay_us(SERIAL_DELAY); | |||
// check if the slave is present | |||
if (serial_read_pin()) { | |||
// slave failed to pull the line low, assume not present | |||
sei(); | |||
return 1; | |||
} | |||
// if the slave is present syncronize with it | |||
sync_recv(); | |||
uint8_t checksum_computed = 0; | |||
// receive data from the slave | |||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { | |||
serial_slave_buffer[i] = serial_read_byte(); | |||
sync_recv(); | |||
checksum_computed += serial_slave_buffer[i]; | |||
} | |||
uint8_t checksum_received = serial_read_byte(); | |||
sync_recv(); | |||
if (checksum_computed != checksum_received) { | |||
sei(); | |||
return 1; | |||
} | |||
uint8_t checksum = 0; | |||
// send data to the slave | |||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { | |||
serial_write_byte(serial_master_buffer[i]); | |||
sync_recv(); | |||
checksum += serial_master_buffer[i]; | |||
} | |||
serial_write_byte(checksum); | |||
sync_recv(); | |||
// always, release the line when not in use | |||
serial_output(); | |||
serial_high(); | |||
sei(); | |||
return 0; | |||
} | |||
#endif |
@ -0,0 +1,26 @@ | |||
#ifndef MY_SERIAL_H | |||
#define MY_SERIAL_H | |||
#include "config.h" | |||
#include <stdbool.h> | |||
/* TODO: some defines for interrupt setup */ | |||
#define SERIAL_PIN_DDR DDRD | |||
#define SERIAL_PIN_PORT PORTD | |||
#define SERIAL_PIN_INPUT PIND | |||
#define SERIAL_PIN_MASK _BV(PD0) | |||
#define SERIAL_PIN_INTERRUPT INT0_vect | |||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 | |||
#define SERIAL_MASTER_BUFFER_LENGTH 1 | |||
// Buffers for master - slave communication | |||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; | |||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; | |||
void serial_master_init(void); | |||
void serial_slave_init(void); | |||
int serial_update_buffers(void); | |||
bool serial_slave_data_corrupt(void); | |||
#endif |
@ -0,0 +1,41 @@ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include "split_util.h" | |||
#include "progmem.h" | |||
#include "print.h" | |||
#include "rgblight.h" | |||
#ifdef USE_I2C | |||
# include "i2c.h" | |||
#else // USE_SERIAL | |||
# include "serial.h" | |||
#endif | |||
rgblight_config_t rgblight_config; | |||
void rgblight_slave_update(void) { | |||
//rgblight_effect_christmas(); | |||
} | |||
void rgblight_set(void) { | |||
if (rgblight_config.enable) { | |||
#ifdef RGBW | |||
ws2812_setleds_rgbw(led, RGBLED_NUM); | |||
#else | |||
ws2812_setleds(led, RGBLED_NUM); | |||
#endif | |||
} else { | |||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||
led[i].r = 0; | |||
led[i].g = 0; | |||
led[i].b = 0; | |||
} | |||
#ifdef RGBW | |||
ws2812_setleds_rgbw(led, RGBLED_NUM); | |||
#else | |||
ws2812_setleds(led, RGBLED_NUM); | |||
#endif | |||
} | |||
} |
@ -0,0 +1,6 @@ | |||
#ifndef SPLIT_RGB_H | |||
#define SPLIT_RGB_H | |||
void rgblight_slave_update(void); | |||
#endif |
@ -0,0 +1,86 @@ | |||
#include <avr/io.h> | |||
#include <avr/wdt.h> | |||
#include <avr/power.h> | |||
#include <avr/interrupt.h> | |||
#include <util/delay.h> | |||
#include <avr/eeprom.h> | |||
#include "split_util.h" | |||
#include "matrix.h" | |||
#include "keyboard.h" | |||
#include "config.h" | |||
#include "timer.h" | |||
#ifdef USE_I2C | |||
# include "i2c.h" | |||
#else | |||
# include "serial.h" | |||
#endif | |||
volatile bool isLeftHand = true; | |||
static void setup_handedness(void) { | |||
#ifdef EE_HANDS | |||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); | |||
#else | |||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c | |||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) | |||
isLeftHand = !has_usb(); | |||
#else | |||
isLeftHand = has_usb(); | |||
#endif | |||
#endif | |||
} | |||
static void keyboard_master_setup(void) { | |||
#ifdef USE_I2C | |||
i2c_master_init(); | |||
#ifdef SSD1306OLED | |||
matrix_master_OLED_init (); | |||
#endif | |||
#else | |||
serial_master_init(); | |||
#endif | |||
} | |||
static void keyboard_slave_setup(void) { | |||
timer_init(); | |||
#ifdef USE_I2C | |||
i2c_slave_init(SLAVE_I2C_ADDRESS); | |||
#else | |||
serial_slave_init(); | |||
#endif | |||
} | |||
bool has_usb(void) { | |||
USBCON |= (1 << OTGPADE); //enables VBUS pad | |||
_delay_us(5); | |||
return (USBSTA & (1<<VBUS)); //checks state of VBUS | |||
} | |||
void split_keyboard_setup(void) { | |||
setup_handedness(); | |||
if (has_usb()) { | |||
keyboard_master_setup(); | |||
} else { | |||
keyboard_slave_setup(); | |||
} | |||
sei(); | |||
} | |||
void keyboard_slave_loop(void) { | |||
matrix_init(); | |||
while (1) { | |||
matrix_slave_scan(); | |||
} | |||
} | |||
// this code runs before the usb and keyboard is initialized | |||
void matrix_setup(void) { | |||
split_keyboard_setup(); | |||
if (!has_usb()) { | |||
keyboard_slave_loop(); | |||
} | |||
} |
@ -0,0 +1,20 @@ | |||
#ifndef SPLIT_KEYBOARD_UTIL_H | |||
#define SPLIT_KEYBOARD_UTIL_H | |||
#include <stdbool.h> | |||
#include "eeconfig.h" | |||
#define SLAVE_I2C_ADDRESS 0x32 | |||
extern volatile bool isLeftHand; | |||
// slave version of matix scan, defined in matrix.c | |||
void matrix_slave_scan(void); | |||
void split_keyboard_setup(void); | |||
bool has_usb(void); | |||
void keyboard_slave_loop(void); | |||
void matrix_master_OLED_init (void); | |||
#endif |
@ -0,0 +1 @@ | |||
#include "zen.h" |
@ -0,0 +1,23 @@ | |||
#ifndef ZEN_H | |||
#define ZEN_H | |||
#include "rev1.h" | |||
#include "quantum.h" | |||
// Used to create a keymap using only KC_ prefixed keys | |||
#define KC_KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, R06,\ | |||
L10, L11, L12, L13, L14, L15, R11, R12, R13, R14, R15, R16,\ | |||
L20, L21, L22, L23, L24, L25, R21, R22, R23, R24, R25, R26,\ | |||
L30, L31, L32, L33, L34, L35, R31, R32, R33, R34, R35, R36,\ | |||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ | |||
) \ | |||
KEYMAP( \ | |||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ | |||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ | |||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ | |||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \ | |||
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, KC_##R46, \ | |||
) | |||
#endif |