@ -0,0 +1,34 @@ | |||
/* | |||
Copyright 2021 rookiebwoy | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0913 | |||
#define MANUFACTURER rookiebwoy | |||
#define PRODUCT neopad | |||
/* Column/Row IO definitions */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* Reduce tapdance required taps from 5 to 2 */ | |||
#define TAPPING_TOGGLE 2 |
@ -0,0 +1,25 @@ | |||
# Neopad | |||
Neopad is a little macropad with four switches and two rotary encoders, made by through hole components only. | |||
_Actually the number of switches is six, because even the encoder are allowed to click._ | |||
![Neopad](https://i.imgur.com/TgOkj2Fh.jpg "Neopad first proto") | |||
The Neopad in the photo above is the first prototype. See the project repository for revision 1 update and KiCad files. | |||
* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy) | |||
* Hardware supported: ProMicro, _Elite-C (not tested)_ | |||
* Project repository: [Neopad on github](https://github.com/rookiebwoy/neopad) | |||
Make example for this keyboard (after setting up your build environment): | |||
make neopad/rev1:default | |||
Flashing example for this keyboard: | |||
make neopad/rev1:default:flash | |||
When asked by the terminal, press the dedicated `RESET` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
@ -0,0 +1,41 @@ | |||
/* | |||
Copyright 2021 rookiebwoy | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define DEVICE_VER 0x0010 | |||
/* Column/Row IO definitions */ | |||
#define MATRIX_ROWS 2 | |||
#define MATRIX_COLS 3 | |||
#define MATRIX_ROW_PINS { F4, F5 } | |||
#define MATRIX_COL_PINS { B3, B2, B6 } | |||
#define UNUSED_PINS | |||
/* Dual rotary encoders */ | |||
#define ENCODERS_PAD_A { D1, D4 } | |||
#define ENCODERS_PAD_B { D0, C6 } | |||
/* Onboard LEDs */ | |||
#define LED_00 F6 | |||
#define LED_01 F7 | |||
/* Bootmagic - hold down rotary encoder pushbutton while plugging in to enter bootloader */ | |||
#define BOOTMAGIC_LITE_ROW 0 | |||
#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,16 @@ | |||
{ | |||
"keyboard_name": "neopad", | |||
"keyboard_folder": "neopad/rev1", | |||
"url": "https://github.com/rookiebwoy/neopad)", | |||
"maintainer": "rookiebwoy", | |||
"width": 3, | |||
"height": 2, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, | |||
{"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,153 @@ | |||
/* Copyright 2021 rookiebwoy | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* | |||
LAYER 0 - MUSIC | |||
/-----------------------------` | |||
| TO(1) | stop | mute | L ENC: prev/next song | |||
|---------|---------|---------| | |||
| prev | play | next | R ENC: vol up/down | |||
\-----------------------------' | |||
*/ | |||
[0] = LAYOUT( | |||
TO(1), KC_MSTP, KC_MUTE, | |||
KC_MPRV, KC_MPLY, KC_MNXT | |||
), | |||
/* | |||
LAYER 1 - MOVEMENT IN WINDOWS | |||
/---------------------------------------` | |||
| TO(2) | maximize | show desktop | L ENC: change desktop | |||
|-------------|----------|--------------| | |||
| move window | minimize | move window | R ENC: change browser tab + change explorer window | |||
\---------------------------------------' | |||
*/ | |||
[1] = LAYOUT( | |||
TO(2), LGUI(KC_UP), LGUI(KC_D), | |||
LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RIGHT) | |||
), | |||
/* | |||
LAYER 2 - SHORTCUT | |||
/------------------------------` | |||
| TO(3) | esc | task man | L ENC: redo/undo | |||
|---------|---------|----------| | |||
| cut | copy | paste | R ENC: mouse wheel up/down | |||
\------------------------------' | |||
*/ | |||
[2] = LAYOUT( | |||
TO(3), KC_ESC, LCTL(LSFT(KC_ESC)), | |||
LCTL(KC_X), LCTL(KC_C), LCTL(KC_V) | |||
), | |||
/* | |||
LAYER 3 - AUDACITY | |||
/-----------------------------` | |||
| TO(0) | REC | canc | L ENC: pan right/left | |||
|---------|---------|---------| | |||
| ctrl | play | pause | R ENC: mouse wheel up/down | |||
\-----------------------------' | |||
*/ | |||
[3] = LAYOUT( | |||
TO(0), LSFT(KC_R), KC_DEL, | |||
KC_LCTL, KC_SPC, KC_P | |||
), | |||
}; | |||
void encoder_update_user(uint8_t index, bool clockwise) { | |||
if (index == 0) { /* LEFT ENCODER */ | |||
switch (get_highest_layer(layer_state)) { | |||
case 0: | |||
// layer 0 - next song (CW) and previous (CCW) | |||
if (clockwise) { | |||
tap_code(KC_MNXT); | |||
} else { | |||
tap_code(KC_MPRV); | |||
} | |||
break; | |||
case 1: | |||
// layer 1 - change desktop right (CW) and left (CCW) | |||
if (clockwise) { | |||
tap_code16(LCTL(LGUI(KC_RIGHT))); | |||
} else { | |||
tap_code16(LCTL(LGUI(KC_LEFT))); | |||
} | |||
break; | |||
case 2: | |||
// layer 2 - redo (CW) and undo (CCW) | |||
if (clockwise) { | |||
tap_code16(LCTL(KC_Y)); | |||
} else { | |||
tap_code16(LCTL(KC_Z)); | |||
} | |||
break; | |||
case 3: | |||
// layer 3 - pan right (CW) and left (CCW) | |||
if (clockwise) { | |||
tap_code(KC_WH_R); | |||
} else { | |||
tap_code(KC_WH_L); | |||
} | |||
break; | |||
} | |||
} else if (index == 1) { /* RIGHT ENCODER */ | |||
switch (get_highest_layer(layer_state)) { | |||
case 0: | |||
// layer 0 - volume up (CW) and down (CCW) | |||
if (clockwise) { | |||
tap_code(KC_VOLU); | |||
} else { | |||
tap_code(KC_VOLD); | |||
} | |||
break; | |||
case 1: | |||
// layer 1 - change browser tab (CW) and change explorer window (CCW) | |||
if (clockwise) { | |||
tap_code16(LCTL(KC_TAB)); | |||
} else { | |||
tap_code16(LALT(LSFT(KC_TAB))); | |||
} | |||
break; | |||
case 2: | |||
// layer 2 - wheel up (CW) and down (CCW) | |||
if (clockwise) { | |||
tap_code(KC_WH_U); | |||
} else { | |||
tap_code(KC_WH_D); | |||
} | |||
break; | |||
case 3: | |||
// layer 3 - wheel up (CW) and down (CCW) | |||
if (clockwise) { | |||
tap_code(KC_WH_U); | |||
} else { | |||
tap_code(KC_WH_D); | |||
} | |||
break; | |||
} | |||
} | |||
} |
@ -0,0 +1,5 @@ | |||
# Neopad rev1 | |||
Final revision of the Neopad macropad. For in depth look please go to [project repository](https://github.com/rookiebwoy/neopad). | |||
@ -0,0 +1,61 @@ | |||
/* Copyright 2021 rookiebwoy | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rev1.h" | |||
void keyboard_pre_init_kb(void) { | |||
// Set LED IO as outputs | |||
setPinOutput(LED_00); | |||
setPinOutput(LED_01); | |||
keyboard_pre_init_user(); | |||
} | |||
void shutdown_user() { | |||
// Shutdown LEDs | |||
writePinLow(LED_00); | |||
writePinLow(LED_01); | |||
} | |||
layer_state_t layer_state_set_kb(layer_state_t state) { | |||
state = layer_state_set_user(state); | |||
// Layer LEDs act as binary indication of current layer | |||
uint8_t layer = get_highest_layer(state); | |||
writePin(LED_00, layer & 0b1); | |||
writePin(LED_01, (layer >> 1) & 0b1); | |||
return state; | |||
} | |||
// Optional override functions below. | |||
// You can leave any or all of these undefined. | |||
// These are only required if you want to perform custom actions. | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
uint8_t led_delay_ms = 80; | |||
for (int i = 0; i < 2; i++) { | |||
writePinHigh(LED_00); | |||
writePinHigh(LED_01); | |||
wait_ms(led_delay_ms); | |||
writePinLow(LED_00); | |||
writePinLow(LED_01); | |||
if (i < 1) { | |||
wait_ms(led_delay_ms); | |||
} | |||
} | |||
matrix_init_user(); | |||
} |
@ -0,0 +1,26 @@ | |||
/* Copyright 2021 rookiebwoy | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
k00, k01, k02, \ | |||
k10, k11, k12 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02 }, \ | |||
{ k10, k11, k12 } \ | |||
} |
@ -0,0 +1,25 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes | |||
KEY_LOCK_ENABLE = yes |
@ -0,0 +1 @@ | |||
DEFAULT_FOLDER = neopad/rev1 |