Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/14861/head
@ -0,0 +1,90 @@ | |||
/* | |||
Copyright 2021 floookay | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xF100 | |||
#define PRODUCT_ID 0x91CE | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER floookay | |||
#define PRODUCT pluckey | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 7 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B4, F5, F6, B6, B5 } | |||
#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, F7 } | |||
#define UNUSED_PINS { F4, B1 } | |||
#define DIODE_DIRECTION COL2ROW | |||
/* encoder support */ | |||
#define ENCODERS_PAD_A { B3 } | |||
#define ENCODERS_PAD_B { B2 } | |||
#define ENCODER_RESOLUTION 2 | |||
#define ENCODERS_PAD_A_RIGHT { B2 } | |||
#define ENCODERS_PAD_B_RIGHT { B3 } | |||
#define ENCODER_RESOLUTION_RIGHT 2 | |||
/* communication between sides */ | |||
#define USE_SERIAL | |||
#define SOFT_SERIAL_PIN D2 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,149 @@ | |||
{ | |||
"keyboard_name": "pluckey", | |||
"url": "https://github.com/floookay/pluckey", | |||
"maintainer": "floookay", | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"x":3.5, "y":0}, | |||
{"x":15, "y":0}, | |||
{"x":2.5, "y":0.125}, | |||
{"x":4.5, "y":0.125}, | |||
{"x":14, "y":0.125}, | |||
{"x":16, "y":0.125}, | |||
{"x":5.5, "y":0.25}, | |||
{"x":6.5, "y":0.25}, | |||
{"x":12, "y":0.25}, | |||
{"x":13, "y":0.25}, | |||
{"x":0, "y":0.625, "w":1.5}, | |||
{"x":1.5, "y":0.625}, | |||
{"x":17, "y":0.625}, | |||
{"x":18, "y":0.625, "w":1.5}, | |||
{"x":3.5, "y":1.0}, | |||
{"x":15, "y":1.0}, | |||
{"x":2.5, "y":1.125}, | |||
{"x":4.5, "y":1.125}, | |||
{"x":14, "y":1.125}, | |||
{"x":16, "y":1.125}, | |||
{"x":5.5, "y":1.25}, | |||
{"x":6.5, "y":1.25}, | |||
{"x":12, "y":1.25}, | |||
{"x":13, "y":1.25}, | |||
{"x":0, "y":1.625, "w":1.5}, | |||
{"x":1.5, "y":1.625}, | |||
{"x":17, "y":1.625}, | |||
{"x":18, "y":1.625, "w":1.5}, | |||
{"x":3.5, "y":2}, | |||
{"x":15, "y":2}, | |||
{"x":2.5, "y":2.125}, | |||
{"x":4.5, "y":2.125}, | |||
{"x":14, "y":2.125}, | |||
{"x":16, "y":2.125}, | |||
{"x":5.5, "y":2.25}, | |||
{"x":6.5, "y":2.25}, | |||
{"x":12, "y":2.25}, | |||
{"x":13, "y":2.25}, | |||
{"x":0, "y":2.625, "w":1.5}, | |||
{"x":1.5, "y":2.625}, | |||
{"x":17, "y":2.625}, | |||
{"x":18, "y":2.625, "w":1.5}, | |||
{"x":6.5, "y":3.25}, | |||
{"x":12, "y":3.25}, | |||
{"x":3.5, "y":3}, | |||
{"x":15, "y":3}, | |||
{"x":2.5, "y":3.125}, | |||
{"x":4.5, "y":3.125}, | |||
{"x":14, "y":3.125}, | |||
{"x":16, "y":3.125}, | |||
{"x":5.5, "y":3.25}, | |||
{"x":13, "y":3.25}, | |||
{"x":0, "y":3.625, "w":1.5}, | |||
{"x":1.5, "y":3.625}, | |||
{"x":17, "y":3.625}, | |||
{"x":18, "y":3.625, "w":1.5}, | |||
{"x":7.5, "y":3.75}, | |||
{"x":11, "y":3.75}, | |||
{"x":3.5, "y":4}, | |||
{"x":15, "y":4}, | |||
{"x":2.5, "y":4.125}, | |||
{"x":4.5, "y":4.125}, | |||
{"x":14, "y":4.125}, | |||
{"x":16, "y":4.125}, | |||
{"x":5.75, "y":4.5, "w":1.5}, | |||
{"x":12.25, "y":4.5, "w":1.5}, | |||
{"x":7.25, "y":4.75}, | |||
{"x":11.25, "y":4.75} | |||
] | |||
}, | |||
"LAYOUT_ergo": { | |||
"layout": [ | |||
{"x":3.5, "y":0}, | |||
{"x":15, "y":0}, | |||
{"x":2.5, "y":0.125}, | |||
{"x":4.5, "y":0.125}, | |||
{"x":14, "y":0.125}, | |||
{"x":16, "y":0.125}, | |||
{"x":5.5, "y":0.25}, | |||
{"x":6.5, "y":0.25}, | |||
{"x":12, "y":0.25}, | |||
{"x":13, "y":0.25}, | |||
{"x":0, "y":0.625, "w":1.5}, | |||
{"x":1.5, "y":0.625}, | |||
{"x":17, "y":0.625}, | |||
{"x":18, "y":0.625, "w":1.5}, | |||
{"x":3.5, "y":1.0}, | |||
{"x":15, "y":1.0}, | |||
{"x":2.5, "y":1.125}, | |||
{"x":4.5, "y":1.125}, | |||
{"x":14, "y":1.125}, | |||
{"x":16, "y":1.125}, | |||
{"x":5.5, "y":1.25}, | |||
{"x":6.5, "y":1.25, "h":1.5}, | |||
{"x":12, "y":1.25, "h":1.5}, | |||
{"x":13, "y":1.25}, | |||
{"x":0, "y":1.625, "w":1.5}, | |||
{"x":1.5, "y":1.625}, | |||
{"x":17, "y":1.625}, | |||
{"x":18, "y":1.625, "w":1.5}, | |||
{"x":3.5, "y":2}, | |||
{"x":15, "y":2}, | |||
{"x":2.5, "y":2.125}, | |||
{"x":4.5, "y":2.125}, | |||
{"x":14, "y":2.125}, | |||
{"x":16, "y":2.125}, | |||
{"x":5.5, "y":2.25}, | |||
{"x":13, "y":2.25}, | |||
{"x":0, "y":2.625, "w":1.5}, | |||
{"x":1.5, "y":2.625}, | |||
{"x":17, "y":2.625}, | |||
{"x":18, "y":2.625, "w":1.5}, | |||
{"x":6.5, "y":2.75, "h":1.5}, | |||
{"x":12, "y":2.75, "h":1.5}, | |||
{"x":3.5, "y":3}, | |||
{"x":15, "y":3}, | |||
{"x":2.5, "y":3.125}, | |||
{"x":4.5, "y":3.125}, | |||
{"x":14, "y":3.125}, | |||
{"x":16, "y":3.125}, | |||
{"x":5.5, "y":3.25}, | |||
{"x":13, "y":3.25}, | |||
{"x":0, "y":3.625, "w":1.5}, | |||
{"x":1.5, "y":3.625}, | |||
{"x":17, "y":3.625}, | |||
{"x":18, "y":3.625, "w":1.5}, | |||
{"x":7.5, "y":3.75}, | |||
{"x":11, "y":3.75}, | |||
{"x":3.5, "y":4}, | |||
{"x":15, "y":4}, | |||
{"x":2.5, "y":4.125}, | |||
{"x":4.5, "y":4.125}, | |||
{"x":14, "y":4.125}, | |||
{"x":16, "y":4.125}, | |||
{"x":5.75, "y":4.5, "w":1.5}, | |||
{"x":12.25, "y":4.5, "w":1.5}, | |||
{"x":7.25, "y":4.75}, | |||
{"x":11.25, "y":4.75} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,77 @@ | |||
/* Copyright 2021 floookay | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST | |||
}; | |||
// Defines the keycodes used by our macros in process_record_user | |||
enum custom_keycodes { | |||
M_ARROW | |||
}; | |||
#define MO_LOW MO(_LOWER) | |||
#define MO_RAIS MO(_RAISE) | |||
#define MO_ADJU MO(_ADJUST) | |||
#define MO_CURR _______ | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LPRN, KC_RPRN, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_HOME, KC_END, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||
KC_LGUI, KC_LALT, MO_LOW, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, MO_RAIS, KC_RALT, KC_MEH | |||
), | |||
[_LOWER] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PSCR, | |||
_______, _______, _______, _______, KC_PIPE, KC_UNDS, KC_LPRN, KC_RPRN, KC_PLUS, KC_PIPE, _______, _______, _______, _______, | |||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_LPRN, KC_RPRN, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, | |||
_______, _______, _______, _______, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, MO_CURR, _______, KC_DEL, _______, _______, MO_ADJU, _______, _______ | |||
), | |||
[_RAISE] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, | |||
_______, _______, _______, KC_VOLU, _______, _______, KC_LPRN, KC_RPRN, _______, KC_BTN4, KC_UP, KC_BTN5, _______, _______, | |||
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_LPRN, KC_RPRN, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, | |||
_______, _______, _______, KC_VOLD, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, KC_PGDN, _______, _______, _______, | |||
_______, _______, MO_ADJU, _______, KC_DEL, _______, _______, MO_CURR, _______, _______ | |||
), | |||
[_ADJUST] = LAYOUT( | |||
KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_U, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_R, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, KC_CLR, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case M_ARROW: | |||
if (record->event.pressed) { | |||
SEND_STRING("->"); | |||
} | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1,4 @@ | |||
# Default keymap | |||
![keymap](https://gist.githubusercontent.com/floookay/ea7313862e407c9b5aaea3d6ed3ce233/raw/0a37fe682f76bbaa55cbc56527e4666bedbf5761/layout.png) | |||
[Keyboard-Layout-Editor](http://www.keyboard-layout-editor.com/#/gists/13c9d00bd0c0c9e3fe3b3d8d98672ef9) [(raw)](https://gist.github.com/floookay/13c9d00bd0c0c9e3fe3b3d8d98672ef9) |
@ -0,0 +1,38 @@ | |||
/* Copyright 2021 floookay | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "pluckey.h" | |||
#ifdef ENCODER_ENABLE | |||
bool encoder_update_kb(uint8_t index, bool clockwise) { | |||
if (!encoder_update_user(index, clockwise)) { return false; } | |||
if (index == 0) { | |||
if (clockwise) { | |||
tap_code_delay(KC_VOLU, 10); | |||
} else { | |||
tap_code_delay(KC_VOLD, 10); | |||
} | |||
} | |||
else if (index == 1) { | |||
if (clockwise) { | |||
tap_code(KC_WH_U); | |||
} else { | |||
tap_code(KC_WH_D); | |||
} | |||
} | |||
return true; | |||
} | |||
#endif |
@ -0,0 +1,46 @@ | |||
/* Copyright 2021 floookay | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
l00, l01, l02, l03, l04, l05, l06, r00, r01, r02, r03, r04, r05, r06, \ | |||
l10, l11, l12, l13, l14, l15, l16, r10, r11, r12, r13, r14, r15, r16, \ | |||
l20, l21, l22, l23, l24, l25, l26, r20, r21, r22, r23, r24, r25, r26, \ | |||
l30, l31, l32, l33, l34, l35, l36, l41, r45, r30, r31, r32, r33, r34, r35, r36, \ | |||
l42, l43, l44, l45, l46, r40, r41, r42, r43, r44 \ | |||
){ \ | |||
{ l00, l01, l02, l03, l04, l05, l06 }, \ | |||
{ l10, l11, l12, l13, l14, l15, l16 }, \ | |||
{ l20, l21, l22, l23, l24, l25, l26 }, \ | |||
{ l30, l31, l32, l33, l34, l35, l36 }, \ | |||
{ KC_NO, l41, l42, l43, l44, l45, l46 }, \ | |||
{ r06, r05, r04, r03, r02, r01, r00 }, \ | |||
{ r16, r15, r14, r13, r12, r11, r10 }, \ | |||
{ r26, r25, r24, r23, r22, r21, r20 }, \ | |||
{ r36, r35, r34, r33, r32, r31, r30 }, \ | |||
{ KC_NO, r45, r44, r43, r42, r41, r40 } \ | |||
} |
@ -0,0 +1,19 @@ | |||
# Pluckey | |||
![pluckey](https://gist.githubusercontent.com/floookay/ea7313862e407c9b5aaea3d6ed3ce233/raw/1757078b1adf7ac4d51d74f445107bdb46e013a3/sandwich%2520angle.jpg) | |||
The pluckey is an ergodox like split keyboard with moderate columnal stagger and a horizontal space key. | |||
* Keyboard Maintainer: [floookay](https://github.com/floookay) | |||
* Hardware Supported: pluckey pcbs with pro micro controllers | |||
* Hardware Availability: [pcb & case files](https://github.com/floookay/pluckey) | |||
Make example for this keyboard (after setting up your build environment): | |||
make pluckey:default | |||
Flashing example for this keyboard: | |||
make pluckey:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes | |||
SPLIT_KEYBOARD = yes |