diff --git a/Makefile b/Makefile
index 5642aa2839a..f9b865b9f8f 100644
--- a/Makefile
+++ b/Makefile
@@ -65,22 +65,24 @@ endif
 
 KEYBOARD_PATH = $(TOP_DIR)/keyboards/$(KEYBOARD)
 
+ifdef sub
+	SUBPROJECT=$(sub)
+endif
+ifdef subproject
+	SUBPROJECT=$(subproject)
+endif
+
 ifneq ("$(wildcard $(KEYBOARD_PATH)/$(KEYBOARD).c)","")
 	KEYBOARD_FILE = keyboards/$(KEYBOARD)/$(KEYBOARD).c
 	ifndef ARCH
-		include $(KEYBOARD_PATH)/Makefile
+		ifneq ("$(wildcard $(KEYBOARD_PATH)/Makefile)","")
+			include $(KEYBOARD_PATH)/Makefile
+		endif
 	endif
 else 
 $(error "$(KEYBOARD_PATH)/$(KEYBOARD).c" does not exist)
 endif
 
-ifdef sub
-	SUBPROJECT=$(sub)
-endif
-ifdef subproject
-	SUBPROJECT=$(subproject)
-endif
-
 ifdef SUBPROJECT_DEFAULT
 	SUBPROJECT?=$(SUBPROJECT_DEFAULT)
 endif
@@ -110,7 +112,13 @@ ifneq ("$(wildcard $(KEYMAP_PATH)/keymap.c)","")
 	KEYMAP_FILE = keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/keymap.c
 	-include $(KEYMAP_PATH)/Makefile
 else 
+	ifeq ("$(wildcard $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)/keymap.c)","")
 $(error "$(KEYMAP_PATH)/keymap.c" does not exist)
+	else
+		KEYMAP_PATH = $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
+		KEYMAP_FILE = keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/$(KEYMAP)/keymap.c
+		-include $(KEYMAP_PATH)/Makefile
+	endif
 endif
 
 ifdef SUBPROJECT
diff --git a/keyboards/handwired/handwired.c b/keyboards/handwired/handwired.c
new file mode 100644
index 00000000000..feef8a919e3
--- /dev/null
+++ b/keyboards/handwired/handwired.c
@@ -0,0 +1 @@
+#include "handwired.h"
\ No newline at end of file
diff --git a/keyboards/handwired/handwired.h b/keyboards/handwired/handwired.h
new file mode 100644
index 00000000000..7a4a4835e61
--- /dev/null
+++ b/keyboards/handwired/handwired.h
@@ -0,0 +1 @@
+#include "quantum.h"
\ No newline at end of file
diff --git a/keyboards/handwired/onekey/Makefile b/keyboards/handwired/onekey/Makefile
new file mode 100644
index 00000000000..c6d10856a18
--- /dev/null
+++ b/keyboards/handwired/onekey/Makefile
@@ -0,0 +1,65 @@
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/onekey/config.h b/keyboards/handwired/onekey/config.h
new file mode 100644
index 00000000000..c0a6b583921
--- /dev/null
+++ b/keyboards/handwired/onekey/config.h
@@ -0,0 +1,75 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    none
+#define PRODUCT         onekey
+#define DESCRIPTION     test board for qmk
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+#define MATRIX_COL_PINS {  B0 }
+#define MATRIX_ROW_PINS {  D0 }
+#define UNUSED_PINS
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/onekey/keymaps/default/keymap.c b/keyboards/handwired/onekey/keymaps/default/keymap.c
new file mode 100644
index 00000000000..756c4f51edf
--- /dev/null
+++ b/keyboards/handwired/onekey/keymaps/default/keymap.c
@@ -0,0 +1,5 @@
+#include "onekey.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    { KC_A }
+};
diff --git a/keyboards/handwired/onekey/onekey.c b/keyboards/handwired/onekey/onekey.c
new file mode 100644
index 00000000000..c79e0120ebe
--- /dev/null
+++ b/keyboards/handwired/onekey/onekey.c
@@ -0,0 +1 @@
+#include "onekey.h"
\ No newline at end of file
diff --git a/keyboards/handwired/onekey/onekey.h b/keyboards/handwired/onekey/onekey.h
new file mode 100644
index 00000000000..7a4a4835e61
--- /dev/null
+++ b/keyboards/handwired/onekey/onekey.h
@@ -0,0 +1 @@
+#include "quantum.h"
\ No newline at end of file