diff --git a/common_features.mk b/common_features.mk index 0778f8e0f51..b12b6ae518f 100644 --- a/common_features.mk +++ b/common_features.mk @@ -197,6 +197,12 @@ ifeq ($(strip $(USB_HID_ENABLE)), yes) include $(TMK_DIR)/protocol/usb_hid.mk endif + +ifeq ($(strip $(HD44780_ENABLE)), yes) + SRC += drivers/avr/hd44780.c + OPT_DEFS += -DHD44780_ENABLE +endif + QUANTUM_SRC:= \ $(QUANTUM_DIR)/quantum.c \ $(QUANTUM_DIR)/keymap_common.c \ diff --git a/docs/feature_hd44780.md b/docs/feature_hd44780.md new file mode 100644 index 00000000000..e9d9e8b7b87 --- /dev/null +++ b/docs/feature_hd44780.md @@ -0,0 +1,56 @@ +# HD44780 LCD Displays + +This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html) + +You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes. This will use about 400 KB of extra space. + +## Configuration + +You will need to configure the pins used by your display and its number of lines and collumn in your keyboards `config.h`. + +Uncomment the section labled HD44780 and change the parameters as needed. +```` +/* + * HD44780 LCD Display Configuration + */ + +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +```` + +Should you need to configure other properties you can copy them from `quantum/hd44780.h` and set them in your `config.h` + +## Usage + +To initialize your display call lcd_init() with one of these parameters: +```` +LCD_DISP_OFF : display off +LCD_DISP_ON : display on, cursor off +LCD_DISP_ON_CURSOR : display on, cursor on +LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing +```` +This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`. +It is advised to clear the display before use. +To do so call `lcd_clrsrc()`. + +To now print something to your Display you first call `lcd_gotoxy(column, line)`. To go to the start of the first line you would call `lcd_gotoxy(0, 0)` and then print a string with `lcd_puts("example string")`. + +There are more posible methods to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html) diff --git a/docs/features.md b/docs/features.md index 4dee486ef17..d8ca3780dfb 100644 --- a/docs/features.md +++ b/docs/features.md @@ -9,6 +9,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [Backlight](feature_backlight.md) - LED lighting support for your keyboard. * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys. * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself. +* [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard. * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state. * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout. * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior. diff --git a/drivers/avr/hd44780.c b/drivers/avr/hd44780.c new file mode 100644 index 00000000000..51414d8f914 --- /dev/null +++ b/drivers/avr/hd44780.c @@ -0,0 +1,592 @@ +/**************************************************************************** + Title: HD44780U LCD library + Author: Peter Fleury http://tinyurl.com/peterfleury + License: GNU General Public License Version 3 + File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $ + Software: AVR-GCC 3.3 + Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega + + DESCRIPTION + Basic routines for interfacing a HD44780U-based text lcd display + + Originally based on Volker Oth's lcd library, + changed lcd_init(), added additional constants for lcd_command(), + added 4-bit I/O mode, improved and optimized code. + + Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in + 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported. + + Memory mapped mode compatible with Kanda STK200, but supports also + generation of R/W signal through A8 address line. + + USAGE + See the C include lcd.h file for a description of each function + +*****************************************************************************/ +#include +#include +#include +#include +#include "hd44780.h" + +/* +** constants/macros +*/ +#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */ +#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) + /* on ATmega64/128 PINF is on port 0x00 and not 0x60 */ + #define PIN(x) ( &PORTF==&(x) ? _SFR_IO8(0x00) : (*(&x - 2)) ) +#else + #define PIN(x) (*(&x - 2)) /* address of input register of port x */ +#endif + + +#if LCD_IO_MODE +#define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE) +#define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN); +#define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN); +#define lcd_e_toggle() toggle_e() +#define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN) +#define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN) +#define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN) +#define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN) +#endif + +#if LCD_IO_MODE +#if LCD_LINES==1 +#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE +#else +#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES +#endif +#else +#if LCD_LINES==1 +#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE +#else +#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES +#endif +#endif + +#if LCD_CONTROLLER_KS0073 +#if LCD_LINES==4 + +#define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */ +#define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */ +#define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */ + +#endif +#endif + +/* +** function prototypes +*/ +#if LCD_IO_MODE +static void toggle_e(void); +#endif + +/* +** local functions +*/ + + +/************************************************************************* +delay for a minimum of microseconds +the number of loops is calculated at compile-time from MCU clock frequency +*************************************************************************/ +#define delay(us) _delay_us(us) + + +#if LCD_IO_MODE +/* toggle Enable Pin to initiate write */ +static void toggle_e(void) +{ + lcd_e_high(); + lcd_e_delay(); + lcd_e_low(); +} +#endif + + +/************************************************************************* +Low-level function to write byte to LCD controller +Input: data byte to write to LCD + rs 1: write data + 0: write instruction +Returns: none +*************************************************************************/ +#if LCD_IO_MODE +static void lcd_write(uint8_t data,uint8_t rs) +{ + unsigned char dataBits ; + + + if (rs) { /* write data (RS=1, RW=0) */ + lcd_rs_high(); + } else { /* write instruction (RS=0, RW=0) */ + lcd_rs_low(); + } + lcd_rw_low(); /* RW=0 write mode */ + + if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT ) + && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) ) + { + /* configure data pins as output */ + DDR(LCD_DATA0_PORT) |= 0x0F; + + /* output high nibble first */ + dataBits = LCD_DATA0_PORT & 0xF0; + LCD_DATA0_PORT = dataBits |((data>>4)&0x0F); + lcd_e_toggle(); + + /* output low nibble */ + LCD_DATA0_PORT = dataBits | (data&0x0F); + lcd_e_toggle(); + + /* all data pins high (inactive) */ + LCD_DATA0_PORT = dataBits | 0x0F; + } + else + { + /* configure data pins as output */ + DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); + DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); + DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); + DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); + + /* output high nibble first */ + LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); + LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); + LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); + if(data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + if(data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + if(data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + if(data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + lcd_e_toggle(); + + /* output low nibble */ + LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); + LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); + LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); + if(data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + if(data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + if(data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + if(data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + lcd_e_toggle(); + + /* all data pins high (inactive) */ + LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); + LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); + LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); + LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); + } +} +#else +#define lcd_write(d,rs) if (rs) *(volatile uint8_t*)(LCD_IO_DATA) = d; else *(volatile uint8_t*)(LCD_IO_FUNCTION) = d; +/* rs==0 -> write instruction to LCD_IO_FUNCTION */ +/* rs==1 -> write data to LCD_IO_DATA */ +#endif + + +/************************************************************************* +Low-level function to read byte from LCD controller +Input: rs 1: read data + 0: read busy flag / address counter +Returns: byte read from LCD controller +*************************************************************************/ +#if LCD_IO_MODE +static uint8_t lcd_read(uint8_t rs) +{ + uint8_t data; + + + if (rs) + lcd_rs_high(); /* RS=1: read data */ + else + lcd_rs_low(); /* RS=0: read busy flag */ + lcd_rw_high(); /* RW=1 read mode */ + + if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT ) + && ( LCD_DATA0_PIN == 0 )&& (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) ) + { + DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */ + + lcd_e_high(); + lcd_e_delay(); + data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */ + lcd_e_low(); + + lcd_e_delay(); /* Enable 500ns low */ + + lcd_e_high(); + lcd_e_delay(); + data |= PIN(LCD_DATA0_PORT)&0x0F; /* read low nibble */ + lcd_e_low(); + } + else + { + /* configure data pins as input */ + DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN); + DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN); + DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN); + DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN); + + /* read high nibble first */ + lcd_e_high(); + lcd_e_delay(); + data = 0; + if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x10; + if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x20; + if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x40; + if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x80; + lcd_e_low(); + + lcd_e_delay(); /* Enable 500ns low */ + + /* read low nibble */ + lcd_e_high(); + lcd_e_delay(); + if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x01; + if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x02; + if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x04; + if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x08; + lcd_e_low(); + } + return data; +} +#else +#define lcd_read(rs) (rs) ? *(volatile uint8_t*)(LCD_IO_DATA+LCD_IO_READ) : *(volatile uint8_t*)(LCD_IO_FUNCTION+LCD_IO_READ) +/* rs==0 -> read instruction from LCD_IO_FUNCTION */ +/* rs==1 -> read data from LCD_IO_DATA */ +#endif + + +/************************************************************************* +loops while lcd is busy, returns address counter +*************************************************************************/ +static uint8_t lcd_waitbusy(void) + +{ + register uint8_t c; + + /* wait until busy flag is cleared */ + while ( (c=lcd_read(0)) & (1<= LCD_START_LINE2) && (pos < LCD_START_LINE3) ) + addressCounter = LCD_START_LINE3; + else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4) ) + addressCounter = LCD_START_LINE4; + else + addressCounter = LCD_START_LINE1; +#else + if ( pos < LCD_START_LINE3 ) + addressCounter = LCD_START_LINE2; + else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4) ) + addressCounter = LCD_START_LINE3; + else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2) ) + addressCounter = LCD_START_LINE4; + else + addressCounter = LCD_START_LINE1; +#endif +#endif + lcd_command((1<>4; + LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4; + lcd_e_toggle(); + delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */ + + /* repeat last command */ + lcd_e_toggle(); + delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ + + /* repeat last command a third time */ + lcd_e_toggle(); + delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ + + /* now configure for 4bit mode */ + LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4 + lcd_e_toggle(); + delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */ + + /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */ +#else + /* + * Initialize LCD to 8 bit memory mapped mode + */ + + /* enable external SRAM (memory mapped lcd) and one wait state */ + MCUCR = _BV(SRE) | _BV(SRW); + + /* reset LCD */ + delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */ + lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT); /* wait 5ms */ + lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT_REP); /* wait 64us */ + lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */ + delay(LCD_DELAY_INIT_REP); /* wait 64us */ +#endif + +#if KS0073_4LINES_MODE + /* Display with KS0073 controller requires special commands for enabling 4 line mode */ + lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON); + lcd_command(KS0073_4LINES_MODE); + lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF); +#else + lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */ +#endif + lcd_command(LCD_DISP_OFF); /* display off */ + lcd_clrscr(); /* display clear */ + lcd_command(LCD_MODE_DEFAULT); /* set entry mode */ + lcd_command(dispAttr); /* display/cursor control */ + +}/* lcd_init */ + diff --git a/drivers/avr/hd44780.h b/drivers/avr/hd44780.h new file mode 100644 index 00000000000..7421c8131f8 --- /dev/null +++ b/drivers/avr/hd44780.h @@ -0,0 +1,371 @@ +#ifndef LCD_H +#define LCD_H +/************************************************************************* + Title : C include file for the HD44780U LCD library (lcd.c) + Author: Peter Fleury http://tinyurl.com/peterfleury + License: GNU General Public License Version 3 + File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $ + Software: AVR-GCC 4.x + Hardware: any AVR device, memory mapped mode only for AVR with + memory mapped interface (AT90S8515/ATmega8515/ATmega128) +***************************************************************************/ + +/** + @mainpage + Collection of libraries for AVR-GCC + @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 + + @file + @defgroup pfleury_lcd LCD library + @code #include @endcode + + @brief Basic routines for interfacing a HD44780U-based character LCD display + + LCD character displays can be found in many devices, like espresso machines, laser printers. + The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. + + This library allows easy interfacing with a HD44780 compatible display and can be + operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in + 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported. + + Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports + generation of R/W signal through A8 address line. + + @see The chapter Interfacing a HD44780 Based LCD to an AVR + on my home page, which shows example circuits how to connect an LCD to an AVR controller. + + @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury + + @version 2.0 + + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 + +*/ + +#include +#include + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405 +#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" +#endif + + +/**@{*/ + +/* + * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file + * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + */ +#ifdef _LCD_DEFINITIONS_FILE +#include "lcd_definitions.h" +#endif + + +/** + * @name Definition for LCD controller type + * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller. + */ +#ifndef LCD_CONTROLLER_KS0073 +#define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ +#endif + +/** + * @name Definitions for Display Size + * Change these definitions to adapt setting to your display + * + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + * + */ +#ifndef LCD_LINES +#define LCD_LINES 2 /**< number of visible lines of the display */ +#endif +#ifndef LCD_DISP_LENGTH +#define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ +#endif +#ifndef LCD_LINE_LENGTH +#define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ +#endif +#ifndef LCD_START_LINE1 +#define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ +#endif +#ifndef LCD_START_LINE2 +#define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ +#endif +#ifndef LCD_START_LINE3 +#define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ +#endif +#ifndef LCD_START_LINE4 +#define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ +#endif +#ifndef LCD_WRAP_LINES +#define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ +#endif + + +/** + * @name Definitions for 4-bit IO mode + * + * The four LCD data lines and the three control lines RS, RW, E can be on the + * same port or on different ports. + * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on + * different ports. + * + * Normally the four data lines should be mapped to bit 0..3 on one port, but it + * is possible to connect these data lines in different order or even on different + * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions. + * + * Adjust these definitions to your target.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + * + */ +#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ + +#if LCD_IO_MODE + +#ifndef LCD_PORT +#define LCD_PORT PORTA /**< port for the LCD lines */ +#endif +#ifndef LCD_DATA0_PORT +#define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ +#endif +#ifndef LCD_DATA1_PORT +#define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ +#endif +#ifndef LCD_DATA2_PORT +#define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ +#endif +#ifndef LCD_DATA3_PORT +#define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ +#endif +#ifndef LCD_DATA0_PIN +#define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ +#endif +#ifndef LCD_DATA1_PIN +#define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ +#endif +#ifndef LCD_DATA2_PIN +#define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ +#endif +#ifndef LCD_DATA3_PIN +#define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ +#endif +#ifndef LCD_RS_PORT +#define LCD_RS_PORT LCD_PORT /**< port for RS line */ +#endif +#ifndef LCD_RS_PIN +#define LCD_RS_PIN 3 /**< pin for RS line */ +#endif +#ifndef LCD_RW_PORT +#define LCD_RW_PORT LCD_PORT /**< port for RW line */ +#endif +#ifndef LCD_RW_PIN +#define LCD_RW_PIN 2 /**< pin for RW line */ +#endif +#ifndef LCD_E_PORT +#define LCD_E_PORT LCD_PORT /**< port for Enable line */ +#endif +#ifndef LCD_E_PIN +#define LCD_E_PIN 1 /**< pin for Enable line */ +#endif + +#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \ + defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \ + defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) +/* + * memory mapped mode is only supported when the device has an external data memory interface + */ +#define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ +#define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ +#define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ + +#else +#error "external data memory interface not available for this device, use 4-bit IO port mode" + +#endif + + +/** + * @name Definitions of delays + * Used to calculate delay timers. + * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target + * + * These delay times can be adjusted, if some displays require different delays.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + */ +#ifndef LCD_DELAY_BOOTUP +#define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ +#endif +#ifndef LCD_DELAY_INIT +#define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ +#endif +#ifndef LCD_DELAY_INIT_REP +#define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ +#endif +#ifndef LCD_DELAY_INIT_4BIT +#define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ +#endif +#ifndef LCD_DELAY_BUSY_FLAG +#define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ +#endif +#ifndef LCD_DELAY_ENABLE_PULSE +#define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ +#endif + + +/** + * @name Definitions for LCD command instructions + * The constants define the various LCD controller instructions which can be passed to the + * function lcd_command(), see HD44780 data sheet for a complete description. + */ + +/* instruction register bit positions, see HD44780U data sheet */ +#define LCD_CLR 0 /* DB0: clear display */ +#define LCD_HOME 1 /* DB1: return to home position */ +#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ +#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ +#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ +#define LCD_ON 3 /* DB3: turn lcd/cursor on */ +#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ +#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ +#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ +#define LCD_MOVE 4 /* DB4: move cursor/display */ +#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ +#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ +#define LCD_FUNCTION 5 /* DB5: function set */ +#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ +#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ +#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ +#define LCD_CGRAM 6 /* DB6: set CG RAM address */ +#define LCD_DDRAM 7 /* DB7: set DD RAM address */ +#define LCD_BUSY 7 /* DB7: LCD is busy */ + +/* set entry mode: display shift on/off, dec/inc cursor move direction */ +#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ +#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ +#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ +#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ + +/* display on/off, cursor on/off, blinking char at cursor position */ +#define LCD_DISP_OFF 0x08 /* display off */ +#define LCD_DISP_ON 0x0C /* display on, cursor off */ +#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ +#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ +#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ + +/* move cursor/shift display */ +#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ +#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ +#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ +#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ + +/* function set: set interface data length and number of display lines */ +#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ + + +#define LCD_MODE_DEFAULT ((1<. /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + #endif diff --git a/quantum/template/avr/rules.mk b/quantum/template/avr/rules.mk index 45eb6ee3766..d567544c724 100644 --- a/quantum/template/avr/rules.mk +++ b/quantum/template/avr/rules.mk @@ -66,3 +66,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index d3fbe2d8790..13b3cb4c0c1 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -69,6 +69,9 @@ along with this program. If not, see . #ifdef MIDI_ENABLE # include "process_midi.h" #endif +#ifdef HD44780_ENABLE +# include "hd44780.h" +#endif #ifdef MATRIX_HAS_GHOST extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];