@ -0,0 +1,38 @@ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6060 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Jotix | |||||
#define PRODUCT Jot50 | |||||
#define DESCRIPTION A 5x12 compact ortholinear keyboard | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 12 | |||||
/* pro_micro pin-out */ | |||||
#define MATRIX_ROW_PINS { D7, E6, B4, B6, B2 } | |||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D3, D2, D1, D0, D4, C6 } | |||||
#define UNUSED_PINS | |||||
/* leds */ | |||||
#define BACKLIGHT_LEVELS 3 | |||||
#define BACKLIGHT_PIN B5 | |||||
#define BACKLIGHT_BREATHING | |||||
#define BREATHING_PERIOD 5 | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE |
@ -0,0 +1,6 @@ | |||||
#include "jot50.h" | |||||
void matrix_init_kb(void) { | |||||
matrix_init_user(); | |||||
} |
@ -0,0 +1,19 @@ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#define LAYOUT_ortho_5x12( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ | |||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \ | |||||
) \ | |||||
{ \ | |||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ | |||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ | |||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ | |||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \ | |||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b } \ | |||||
} |
@ -0,0 +1,88 @@ | |||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||||
// this is the style you want to emulate. | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||||
// entirely and just use numbers. | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define _ADJUST 3 | |||||
enum planck_keycodes { | |||||
BACKLIT = SAFE_RANGE | |||||
}; | |||||
#define LOWER MO(_LOWER) | |||||
#define RAISE MO(_RAISE) | |||||
/* Funct | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | caps | F11 | F12 | | | | | - | = | [ | ] | | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | | vol- | mute | vol+ | | | | | | | | \ | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | | prev | play | next | | | | | | | | | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | | | | | | | | | home | pgdn | pgup | end | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
*/ | |||||
#define _FUNCT LAYOUT_ortho_5x12 (\ | |||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,\ | |||||
KC_CAPS, KC_F11, KC_F12, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,\ | |||||
_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, KC_BSLS,\ | |||||
_______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,\ | |||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END\ | |||||
) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Qwerty | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | bspc | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | ` | Q | W | E | R | T | Y | U | I | O | P | del | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | tab | A | S | D | F | G | H | J | K | L | ; | ' | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | lshift | Z | X | C | V | B | N | M | , | . | / | enter | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
* | lctrl | lgui | lalt | ralt | lower | space | space | raise | left | down | up | right | | |||||
* +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ | |||||
*/ | |||||
[_QWERTY] = LAYOUT_ortho_5x12 ( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||||
KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT | |||||
), | |||||
[_LOWER] = _FUNCT, | |||||
[_RAISE] = _FUNCT, | |||||
[_ADJUST] = LAYOUT_ortho_5x12 ( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RESET, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, BL_STEP, BL_BRTG, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
}; | |||||
uint32_t layer_state_set_user(uint32_t state) { | |||||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
@ -0,0 +1,37 @@ | |||||
# Jotanck | |||||
![Jotanck] | |||||
A compact 50% (12x5) ortholinear keyboard kit inspired in the Preonic made by jotix. | |||||
Keyboard Maintainer: [jotix](https://github.com/jotix) | |||||
Hardware Supported: Arduino Pro Micro | |||||
### Arduino Pro Micro Pinout | |||||
| Rows | 0 | 1 | 2 | 3 | 4 | | |||||
|-------------|----|----|----|----|----| | |||||
| Arduino pin | 6 | 7 | 8 | 10 | 16 | | |||||
| QMK pin | D7 | E6 | B4 | B6 | B2 | | |||||
| Columns | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | | |||||
|-------------|----|----|----|----|----|----|-----|-----|----|----|----|----| | |||||
| Arduino pin | A3 | A2 | A1 | A0 | 15 | 14 | TX0 | RXI | 2 | 3 | 4 | 5 | | |||||
| QMK pin | F4 | F5 | F6 | F7 | B1 | B3 | D3 | D2 | D1 | D0 | D4 | C6 | | |||||
| | Backlight | | |||||
|-------------|-----------| | |||||
| Arduino pin | 9 | | |||||
| QMK pin | B5 | | |||||
### Compiling the Firmware | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make handwired/jot50:default | |||||
### The Defaukt Keymap | |||||
![Default Keymap](https://i.imgur.com/4WTmcSN.jpg) | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,66 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = caterina | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
MIDI_ENABLE = no # MIDI controls | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||||
API_SYSEX_ENABLE = no | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
LAYOUTS = ortho_5x12 |