* Touhoupad rev 2 * cleanup for PR * fixes after reviewpull/13933/head
@ -0,0 +1,52 @@ | |||
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xD00D | |||
#define PRODUCT_ID 0x0031 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Pimentoso | |||
#define PRODUCT TouhouPad rev2 | |||
#define MATRIX_ROWS 1 | |||
#define MATRIX_COLS 10 | |||
#define MATRIX_ROW_PINS { D4 } | |||
#define MATRIX_COL_PINS { C6,D7,E6,B4,B6,B2,B3,B1,F7,F6 } | |||
#define DIODE_DIRECTION COL2ROW | |||
#define RGB_DI_PIN F4 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLED_NUM 12 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
#define RGBLIGHT_EFFECT_BREATHING | |||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
#define DEBOUNCE 5 |
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "TouhouPad", | |||
"url": "https://github.com/Pimentoso/TouhouPad_v2", | |||
"maintainer": "Pimentoso", | |||
"width": 8.25, | |||
"height": 4, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"label":"esc", "x":5.25, "y":0}, {"label":"enter", "x":6.25, "y":0}, {"label":"slow", "x":0, "y":1}, {"label":"fire", "x":1, "y":1}, {"label":"rapid", "x":2, "y":1}, {"label":"up", "x":6.25, "y":1.75}, {"label":"left", "x":5.25, "y":2.75}, {"label":"down", "x":6.25, "y":2.75}, {"label":"right", "x":7.25, "y":2.75}, {"label":"bomb", "x":3.25, "y":3}] | |||
} | |||
} | |||
} |
@ -0,0 +1,25 @@ | |||
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT( /* Base */ | |||
KC_LSFT, KC_Z, KC_C, KC_X, KC_LEFT, KC_DOWN, KC_RIGHT, KC_UP, KC_ENT, LT(1, KC_ESC) | |||
), | |||
LAYOUT( /* RGB controls */ | |||
KC_NO, KC_NO, KC_NO, KC_NO, RGB_TOG, RGB_VAD, RGB_MOD, RGB_VAI, KC_NO, KC_NO | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for 4pack |
@ -0,0 +1,19 @@ | |||
# TouhouPad | |||
![TouhouPad](https://i.imgur.com/JeEqeEs.png) | |||
A 10 key gamepad specifically for playing Touhou danmaku games. | |||
You can find building instructions and gerber files to print the circuit board on the [project page.](https://github.com/Pimentoso/TouhouPad_v2) | |||
* Keyboard Maintainer: [Michele Ferri](https://github.com/Pimentoso) | |||
* Hardware Supported: Paddino02 PCB rev1, rev2 + Arduino Pro Micro | |||
* Hardware Availability: the PCB is open source and can be freely printed at websites such as [JLCPCB](https://jlcpcb.com/) | |||
Make example for this keyboard (after setting up your build environment): | |||
make pimentoso/touhoupad:default | |||
The gamepad case is completely exposed on the underside, so to enter bootloader mode, just short the RST and GND pins of the pro micro using a metal object. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,22 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output |
@ -0,0 +1,16 @@ | |||
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "touhoupad.h" |
@ -0,0 +1,23 @@ | |||
/* Copyright 2021 Michele Ferri <zomgsako@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT(k00, k01, k02, k03, k04, k05, k06, k07, k08, k09) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 } \ | |||
} |