diff --git a/keyboards/scatter42/config.h b/keyboards/scatter42/config.h new file mode 100644 index 00000000000..3bca175cc5b --- /dev/null +++ b/keyboards/scatter42/config.h @@ -0,0 +1,147 @@ +/* +Copyright 2020 bbrfkr + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3B47 +#define DEVICE_VER 0x0001 +#define MANUFACTURER bbrfkr +#define PRODUCT scatter42 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D4, C6, D7, E6 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 +#define USE_SERIAL + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/scatter42/info.json b/keyboards/scatter42/info.json new file mode 100644 index 00000000000..a682eb61d09 --- /dev/null +++ b/keyboards/scatter42/info.json @@ -0,0 +1,223 @@ +{ + "keyboard_name": "scatter42", + "url": "https://github.com/bbrfkr/keyboards/tree/master/scatter42", + "maintainer": "bbrfkr", + "width": 14, + "height": 5.125, + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "Q", + "x": 0, + "y": 0.5 + }, + { + "label": "W", + "x": 1, + "y": 0.25 + }, + { + "label": "E", + "x": 2, + "y": 0 + }, + { + "label": "R", + "x": 3, + "y": 0.25 + }, + { + "label": "T", + "x": 4, + "y": 0.5 + }, + { + "label": "Y", + "x": 9, + "y": 0.5 + }, + { + "label": "U", + "x": 10, + "y": 0.25 + }, + { + "label": "I", + "x": 11, + "y": 0 + }, + { + "label": "O", + "x": 12, + "y": 0.25 + }, + { + "label": "P", + "x": 13, + "y": 0.5 + }, + { + "label": "A", + "x": 0, + "y": 1.5 + }, + { + "label": "S", + "x": 1, + "y": 1.25 + }, + { + "label": "D", + "x": 2, + "y": 1 + }, + { + "label": "F", + "x": 3, + "y": 1.25 + }, + { + "label": "G", + "x": 4, + "y": 1.5 + }, + { + "label": "H", + "x": 9, + "y": 1.5 + }, + { + "label": "J", + "x": 10, + "y": 1.25 + }, + { + "label": "K", + "x": 11, + "y": 1 + }, + { + "label": "L", + "x": 12, + "y": 1.25 + }, + { + "label": ";", + "x": 13, + "y": 1.5 + }, + { + "label": "Z", + "x": 0, + "y": 2.5 + }, + { + "label": "X", + "x": 1, + "y": 2.25 + }, + { + "label": "C", + "x": 2, + "y": 2 + }, + { + "label": "V", + "x": 3, + "y": 2.25 + }, + { + "label": "B", + "x": 4, + "y": 2.5 + }, + { + "label": "N", + "x": 9, + "y": 2.5 + }, + { + "label": "M", + "x": 10, + "y": 2.25 + }, + { + "label": ",", + "x": 11, + "y": 2 + }, + { + "label": ".", + "x": 12, + "y": 2.25 + }, + { + "label": "/", + "x": 13, + "y": 2.5 + }, + { + "label": "Ctrl", + "x": 0, + "y": 3.5 + }, + { + "label": "Shift", + "x": 1, + "y": 3.25 + }, + { + "label": "Tab", + "x": 2, + "y": 3 + }, + { + "label": "Super", + "x": 3.5, + "y": 3.625 + }, + { + "label": "Lower", + "x": 4.5, + "y": 3.875 + }, + { + "label": "Space", + "x": 5.5, + "y": 4.125 + }, + { + "label": "Enter", + "x": 7.45, + "y": 4.125 + }, + { + "label": "Raise", + "x": 8.45, + "y": 3.875 + }, + { + "label": "Alt", + "x": 9.45, + "y": 3.625 + }, + { + "label": "Back", + "x": 11, + "y": 3 + }, + { + "label": "Shift", + "x": 12, + "y": 3.25 + }, + { + "label": "Ctrl", + "x": 13, + "y": 3.5 + } + ] + } + } +} diff --git a/keyboards/scatter42/keymaps/default/keymap.c b/keyboards/scatter42/keymaps/default/keymap.c new file mode 100644 index 00000000000..53e0d1e5a7f --- /dev/null +++ b/keyboards/scatter42/keymaps/default/keymap.c @@ -0,0 +1,31 @@ +/* Copyright 2020 bbrfkr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _LOWER, + _RAISE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LCTL, KC_LSFT, KC_TAB, KC_LGUI, MO(1), KC_SPC, KC_ENT, MO(2), KC_RALT, KC_BSPC, KC_RSFT, KC_RCTL), + [1] = LAYOUT(KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F11, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_LCTL, KC_LSFT, KC_ESC, KC_LGUI, KC_TRNS, KC_SPC, KC_ENT, MO(3), KC_RALT, KC_DEL, KC_RSFT, KC_PSCR), + [2] = LAYOUT(KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_NO, KC_NO, KC_NO, KC_BSLS, KC_GRV, KC_MINS, KC_EQL, KC_QUOT, KC_LCBR, KC_RCBR, KC_NO, KC_NO, KC_NO, KC_PIPE, KC_TILD, KC_UNDS, KC_PLUS, KC_DQUO, KC_LBRC, KC_RBRC, KC_LCTL, KC_LSFT, KC_ESC, KC_LGUI, MO(3), KC_SPC, KC_ENT, KC_TRNS, KC_RALT, KC_DEL, KC_RSFT, KC_RCTL), + [3] = LAYOUT(KC_VOLU, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BRIU, KC_VOLD, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_BRID, KC_MUTE, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO) +}; diff --git a/keyboards/scatter42/keymaps/default/readme.md b/keyboards/scatter42/keymaps/default/readme.md new file mode 100644 index 00000000000..0471f5e05d8 --- /dev/null +++ b/keyboards/scatter42/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for scatter42 diff --git a/keyboards/scatter42/readme.md b/keyboards/scatter42/readme.md new file mode 100644 index 00000000000..06a59928861 --- /dev/null +++ b/keyboards/scatter42/readme.md @@ -0,0 +1,19 @@ +# scatter42 + +[![scatter42](https://i.imgur.com/2MGMcip.jpg)](https://imgur.com/2MGMcip) + +A split keyboard with 39 (4rows and 5columns) keys and 3 keys for thumbs. + +* Keyboard Maintainer: [bbrfkr](https://github.com/bbrfkr) [@bbrfkr](https://twitter.com/bbrfkr) +* Hardware Supported: scatter42 PCB, Pro Micro +* Hardware Availability: https://bbrfkr.booth.pm/ + +Make example for this keyboard (after setting up your build environment): + + make scatter42:default + +Flashing example for this keyboard: + + make scatter42:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/scatter42/rules.mk b/keyboards/scatter42/rules.mk new file mode 100644 index 00000000000..29f4021bbdf --- /dev/null +++ b/keyboards/scatter42/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes \ No newline at end of file diff --git a/keyboards/scatter42/scatter42.c b/keyboards/scatter42/scatter42.c new file mode 100644 index 00000000000..4126382df6a --- /dev/null +++ b/keyboards/scatter42/scatter42.c @@ -0,0 +1,17 @@ +/* Copyright 2020 bbrfkr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "scatter42.h" diff --git a/keyboards/scatter42/scatter42.h b/keyboards/scatter42/scatter42.h new file mode 100644 index 00000000000..2aae6a5e9ac --- /dev/null +++ b/keyboards/scatter42/scatter42.h @@ -0,0 +1,44 @@ +/* Copyright 2020 bbrfkr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ + L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ + L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + { \ + { L00, L01, L02, L03, L04, KC_NO }, \ + { L10, L11, L12, L13, L14, KC_NO }, \ + { L20, L21, L22, L23, L24, KC_NO }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R04, R03, R02, R01, R00, KC_NO }, \ + { R14, R13, R12, R11, R10, KC_NO }, \ + { R24, R23, R22, R21, R20, KC_NO }, \ + { R35, R34, R33, R32, R31, R30 } \ + }