* Adds basic support for u/flehrad's bigswitch pcb - also adds support for OSX Eject/Power The function of this key depends on the version of OSX and if you have physical media. For a macbook pro 2017 holding this key down brings up the shutdown dialog. If you wrap it in LCTL and LSFT the screenlock turns on immediately. * Switch to Layout Macro - add a code for OSX Sleep * Add a README * Turn on RGB by default * Add info.json * Address comments by @drashna * Only define Eject in keymappull/3026/head
@ -0,0 +1,10 @@ | |||
Big Switch PCB by flehrad | |||
========================= | |||
Designed by Don of the Board Podcast and sold as a kit by [keeb.io](https://keeb.io/collections/frontpage/products/big-switch-pcb?variant=7507922845726) | |||
### Technical Specifications | |||
* Uses a atmega32u4 pro micro or pin compatible MCU | |||
* Pins B5 and B6 connect to the pins on the Big Switch | |||
* Optionally you may add a RGB strip to pin D3 for data and take power from VCC and GND |
@ -0,0 +1,22 @@ | |||
/* | |||
Copyright 2018 QMK Contributors | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "bigswitch.h" | |||
void matrix_init_user(void) { | |||
rgblight_enable(); | |||
rgblight_mode(9); | |||
} |
@ -0,0 +1,28 @@ | |||
/* | |||
Copyright 2018 QMK Contributors | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef BIGSWITCH_H | |||
#define BIGSWITCH_H | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K00 \ | |||
) { \ | |||
{ K00 } \ | |||
} | |||
#endif |
@ -0,0 +1,59 @@ | |||
/* | |||
Copyright 2018 QMK Contributors | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x1209 | |||
#define PRODUCT_ID 0xB195 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER flehrad | |||
#define PRODUCT BigSwitch PCB | |||
#define DESCRIPTION A single key board for Novelkeys Big Switch | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 1 | |||
#define MATRIX_COLS 1 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { B5 } | |||
#define MATRIX_COL_PINS { B6 } | |||
#define UNUSED_PINS { } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 50 | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
false \ | |||
) | |||
/* prevent stuck modifiers */ | |||
#define PREVENT_STUCK_MODIFIERS | |||
#ifdef RGBLIGHT_ENABLE | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 5 | |||
#endif | |||
#endif |
@ -0,0 +1,13 @@ | |||
{ | |||
"keyboard_name": "Bigswitch PCB", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"bootloader": "", | |||
"width": 4, | |||
"height": 4, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"x":0, "y":0, "w":4, "h":4}] | |||
} | |||
} | |||
} |
@ -0,0 +1,27 @@ | |||
/* | |||
Copyright 2018 QMK Contributors | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#define KC_OSX_EJECT 0x66 | |||
#define LOCK_OSX LSFT(LCTL(KC_OSX_EJECT)) | |||
#define SLEEP_OSX LALT(LGUI(KC_OSX_EJECT)) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT(SLEEP_OSX), | |||
}; |
@ -0,0 +1,60 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Bootloader | |||
BOOTLOADER = caterina | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled | |||
AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below | |||
RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. | |||