* jotix 4x12 keymap * readme corrections * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * add jotpad keyboard * add jotpad keyboard * backlight pin for arduino pro micro * readme correction * readme correction * jotpad16 * Update keyboards/handwired/jotpad16/jotpad16.h Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com> * Update keyboards/handwired/jotpad16/keymaps/default/keymap.c Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com> * Update keyboards/handwired/jotpad16/readme.md Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com>pull/5216/head 0.6.301
@ -0,0 +1,38 @@ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6060 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Jotix | |||||
#define PRODUCT JotPad16 | |||||
#define DESCRIPTION A Jotantastic compact NumPad | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 4 | |||||
#define MATRIX_COLS 4 | |||||
/* pro_micro pin-out */ | |||||
#define MATRIX_ROW_PINS { B6, B2, D2, D3 } | |||||
#define MATRIX_COL_PINS { B5, B4, B3, B1 } | |||||
#define UNUSED_PINS | |||||
/* leds */ | |||||
#define QMK_LED E6 | |||||
#define BACKLIGHT_LEVELS 3 | |||||
#define BACKLIGHT_PIN D7 | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 0 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
@ -0,0 +1,6 @@ | |||||
#include "jotpad16.h" | |||||
void matrix_init_kb(void) { | |||||
matrix_init_user(); | |||||
} |
@ -0,0 +1,18 @@ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
// Used to create a keymap using only KC_ prefixed keys | |||||
#define LAYOUT_ortho_4x4( \ | |||||
k00, k01, k02, k03, \ | |||||
k10, k11, k12, k13, \ | |||||
k20, k21, k22, k23, \ | |||||
k30, k31, k32, k33 \ | |||||
) \ | |||||
{ \ | |||||
{ k00, k01, k02, k03 }, \ | |||||
{ k10, k11, k12, k13 }, \ | |||||
{ k20, k21, k22, k23 }, \ | |||||
{ k30, k31, k32, k33 } \ | |||||
} | |||||
@ -0,0 +1,34 @@ | |||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||||
// this is the style you want to emulate. | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||||
// entirely and just use numbers. | |||||
#define _NUMPAD 0 | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Numpad | |||||
* +-------+-------+-------+-------+ | |||||
* | 7 | 8 | 9 | - | | |||||
* +-------+-------+-------+-------+ | |||||
* | 4 | 5 | 6 | + | | |||||
* +-------+-------+-------+-------+ | |||||
* | 1 | 2 | 3 | enter | | |||||
* +-------+-------+-------+-------+ | |||||
* | 0 | . | / | * | | |||||
* +-------+-------+-------+-------+ | |||||
*/ | |||||
[_NUMPAD] = LAYOUT_ortho_4x4( | |||||
KC_P7, KC_P8, KC_P9, KC_MINS, | |||||
KC_P4, KC_P5, KC_P6, KC_PLUS, | |||||
KC_P1, KC_P2, KC_P3, KC_PENT, | |||||
KC_P0, KC_PDOT,KC_PSLS,KC_ASTR | |||||
), | |||||
}; |
@ -0,0 +1,39 @@ | |||||
# JotPad16 | |||||
![JotPad16](https://i.imgur.com/RwmqWuS.jpg) | |||||
A ortholinear keypad (4x4) made by jotix. | |||||
Keyboard Maintainer: [jotix](https://github.com/jotix) | |||||
Hardware Supported: Arduino Pro Micro | |||||
### Arduino Pro Micro Pinout | |||||
| rows | 0 | 1 | 2 | 3 | | |||||
|-------------|----|----|-----|-----| | |||||
| arduino pin | 10 | 16 | RXI | TX0 | | |||||
| qmk pin | B6 | B2 | D2 | D3 | | |||||
| columns | 0 | 1 | 2 | 3 | | |||||
|-------------|----|----|----|----| | |||||
| arduino pin | 9 | 8 | 14 | 15 | | |||||
| qmk pin | B5 | B4 | B3 | C3 | | |||||
| | QMK led | Backlight | | |||||
|-------------|-----------|-----------| | |||||
| Arduino pin | 7 | 6 | | |||||
| qmk pin | E6 | D7 | | |||||
### Compiling the Firmware | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make handwired/jotpad16:default | |||||
### The Default Keymap | |||||
![Default Keymap](https://i.imgur.com/VJZcFRN.jpg) | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||||
@ -0,0 +1,66 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = caterina | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
MIDI_ENABLE = no # MIDI controls | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||||
API_SYSEX_ENABLE = no | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
LAYOUTS = ortho_4x4 |