[Keyboard] Le Chiffre rev 2 and HE additions (#17377)

* chiffre refactor for new revisions

* updated led matrix config

* updated per suggestions

* add tapdance enable

* revert tapdance (none defined in the default keymaps)

* clean up rules

* add readme for HE

* remove notes in readme

* fix perm

* fix perms

* Fix spacing on readme

* fix perm

* fix perms again?

keyboards/tominabox1/le_chiffre/config.h

@@ -20,7 +20,7 @@
 /* USB Device descriptor parameter */
 #define VENDOR_ID 0x7431
 #define PRODUCT_ID 0xD645
-#define DEVICE_VER 0x0001
+
 #define MANUFACTURER tominabox1
 #define PRODUCT Le Chiffre
 
@@ -28,19 +28,6 @@
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 10
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
-#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
-#define UNUSED_PINS
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
@@ -53,14 +40,10 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define encoder pads */
-#define ENCODERS_PAD_A { D5 }
-#define ENCODERS_PAD_B { D3 }
-
 /*
  * WS2812 Underglow Matrix options
  */
-#define RGB_DI_PIN F0
+
 #define RGBLED_NUM 11
 
 #define DRIVER_LED_TOTAL RGBLED_NUM
@@ -76,53 +59,4 @@
 #define RGB_MATRIX_SAT_STEP 8
 #define RGB_MATRIX_VAL_STEP 8
 #define RGB_MATRIX_SPD_STEP 10
-
-// RGB Matrix Animation modes. Explicitly enabled
-// For full list of effects, see:
-// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
-#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_BREATHING
-#    define ENABLE_RGB_MATRIX_BAND_SAT
-#    define ENABLE_RGB_MATRIX_BAND_VAL
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#    define ENABLE_RGB_MATRIX_CYCLE_ALL
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#    define ENABLE_RGB_MATRIX_DUAL_BEACON
-#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-#    define ENABLE_RGB_MATRIX_RAINDROPS
-#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#    define ENABLE_RGB_MATRIX_HUE_BREATHING
-#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
-#    define ENABLE_RGB_MATRIX_HUE_WAVE
-#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
-#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
-#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
-// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
-#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#    define ENABLE_RGB_MATRIX_SPLASH
-#    define ENABLE_RGB_MATRIX_MULTISPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #endif

keyboards/tominabox1/le_chiffre/he/config.h

@@ -0,0 +1,39 @@
+/* Copyright 2022 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER 0x0003
+
+
+/* COL2ROW, ROW2COL*/
+#undef DIODE_DIRECTION
+#define DIODE_DIRECTION COL2ROW
+
+#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
+#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
+#define UNUSED_PINS
+
+/* Define encoder pads */
+#define ENCODERS_PAD_A { D5 }
+#define ENCODERS_PAD_B { D3 }
+
+/*
+ * WS2812 Underglow Matrix options
+ */
+#define RGB_DI_PIN F0

keyboards/tominabox1/le_chiffre/he/he.c

@@ -0,0 +1,33 @@
+/* Copyright 2022 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "he.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  { 3, 4, NO_LED, 5, 6 },
+  { NO_LED, NO_LED, 10, NO_LED, NO_LED },
+  { NO_LED, NO_LED, 9, NO_LED, NO_LED },
+  { 2, 1, 0, 8, 7 }
+}, {
+
+  // LED Index to Physical Position
+  { 128, 64 }, { 77, 64 }, { 0, 48 }, { 0, 0 }, { 115, 0 }, { 166, 0 }, { 255, 0 }, { 255, 48 }, { 178, 64 }, { 128, 40 }, { 128, 30 }
+}, {
+
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
+} };
+#endif

keyboards/tominabox1/le_chiffre/he/he.h

@@ -0,0 +1,33 @@
+/* Copyright 2022 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+  K00, K01, K02, K03, K04, K38, K05, K06, K07, K08, K09, \
+  K10, K11, K12, K13, K14,      K15, K16, K17, K18, K19, \
+  K20, K21, K22, K23, K24,      K25, K26, K27, K28, K29, \
+            K32,      K34,      K35,      K37       \
+) \
+{ \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09  }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19  }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29  }, \
+  { XXX, XXX, K32, XXX, K34, K35, XXX, K37, K38, XXX  }  \
+}

keyboards/tominabox1/le_chiffre/he/readme.md

@@ -0,0 +1 @@
+The HE firmware is for the Hotswap Edition (HE) PCB by @nasp, available at checkerboards.xyz.

keyboards/tominabox1/le_chiffre/he/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+LTO_ENABLE = yes

keyboards/tominabox1/le_chiffre/keymaps/via/keymap.c

@@ -144,13 +144,14 @@ void render_mod_status(uint8_t modifiers) {
     oled_write_ln_P(PSTR("GUI"), (modifiers & MOD_MASK_GUI));
 }
 
-bool oled_task_user(void) {
+void oled_task_keymap(void) {
     render_lechiffre_logo();
     oled_set_cursor(0,3);
     // render_layer_status();	// Renders the current keyboard state (layer, lock, caps, scroll, etc)
 	render_mod_status(get_mods()|get_oneshot_mods());
 	render_keylock_status(host_keyboard_led_state());
 	render_keylogger_status();
+
     return false;
 }
 

keyboards/tominabox1/le_chiffre/readme.md

@@ -4,12 +4,18 @@
 
 Le Chiffre (ironically, "the number" in French is a 30% keyboard designed by tominabox1.  The purpose of the board is to provide a platform for MX and Choc ergo in one package for when ones wrists need a break. The board supports an RGB LED strip with DI on port F0. The board is also fitted with support for run-of-the-mill .91" OLED and EC11 rotary encoder.  
 
+There are 3 PCB revisions: Rev 1 (Original), Rev 2 (P3D version sold with the Le Chiffre Plus), and HE (Hotswap Edition from Checkerboards.xyz).
+
+By default the OLED is **disabled**. This is to prevent issues with operation when one is not installed. Be sure to enable the OLED in the rules.mk file if you have one installed!
+ 
 * Keyboard Maintainer: [TJ Campie](https://github.com/tominabox1)
-* Hardware Supported: Le Chiffre (source not available at this time)
+* Hardware Supported: [Le Chiffre](https://github.com/tominabox1/Le-Chiffre-Keyboard)
 * Hardware Availability: Bring your own case.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make tominabox1/le_chiffre:default
+    make tominabox1/le_chiffre/rev1:default
+    make tominabox1/le_chiffre/rev2:default
+    make tominabox1/le_chiffre/he:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/tominabox1/le_chiffre/rev1/config.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER 0x0001
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
+#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
+#define UNUSED_PINS
+
+/* Define encoder pads */
+#define ENCODERS_PAD_A { D5 }
+#define ENCODERS_PAD_B { D3 }
+
+/*
+ * WS2812 Underglow Matrix options
+ */
+#define RGB_DI_PIN F0

keyboards/tominabox1/le_chiffre/le_chiffre.c → keyboards/tominabox1/le_chiffre/rev1/rev1.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "le_chiffre.h"
+#include "rev1.h"
 
 #ifdef RGB_MATRIX_ENABLE
 led_config_t g_led_config = { {

keyboards/tominabox1/le_chiffre/rev1/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+LTO_ENABLE = yes
+

keyboards/tominabox1/le_chiffre/rev2/config.h

@@ -0,0 +1,43 @@
+/* Copyright 2020 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+#define DEVICE_VER 0x0002
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B3, F6, F7, C7 }
+#define MATRIX_COL_PINS { B2, F0, F1, F4, F5, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+/* Define encoder pads */
+#define ENCODERS_PAD_A { B6 }
+#define ENCODERS_PAD_B { C6 }
+
+/*
+ * WS2812 Underglow Matrix options
+ */
+#define RGB_DI_PIN B1

keyboards/tominabox1/le_chiffre/rev2/readme.md

@@ -0,0 +1,2 @@
+Updated v2 PCB with better plate screw clearances, ESD protection, as well as sweet sweet curvy traces. 
+Rev. 2.0 requires new firmware due to the pinout changing to facilitate prettier trace runs.

keyboards/tominabox1/le_chiffre/rev2/rev2.c

@@ -0,0 +1,33 @@
+/* Copyright 2020 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev2.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  { 3, 4, NO_LED, 5, 6 },
+  { NO_LED, NO_LED, 10, NO_LED, NO_LED },
+  { NO_LED, NO_LED, 9, NO_LED, NO_LED },
+  { 2, 1, 0, 8, 7 }
+}, {
+
+  // LED Index to Physical Position
+  { 128, 64 }, { 77, 64 }, { 0, 48 }, { 0, 0 }, { 115, 0 }, { 166, 0 }, { 255, 0 }, { 255, 48 }, { 178, 64 }, { 128, 40 }, { 128, 30 }
+}, {
+
+  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
+} };
+#endif

keyboards/tominabox1/le_chiffre/rev2/rev2.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 tominabox1
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+  K00, K01, K02, K03, K04, K38, K05, K06, K07, K08, K09, \
+  K10, K11, K12, K13, K14,      K15, K16, K17, K18, K19, \
+  K20, K21, K22, K23, K24,      K25, K26, K27, K28, K29, \
+            K32,      K34,      K35,      K37       \
+) \
+{ \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09  }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19  }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29  }, \
+  { XXX, XXX, K32, XXX, K34, K35, XXX, K37, K38, XXX  }  \
+}

keyboards/tominabox1/le_chiffre/rev2/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+LTO_ENABLE = yes
+

keyboards/tominabox1/le_chiffre/rules.mk

@@ -1,19 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-ENCODER_ENABLE = yes
-OLED_ENABLE = no
-RGB_MATRIX_ENABLE = yes
-RGB_MATRIX_DRIVER = WS2812
-LTO_ENABLE = yes
+DEFAULT_FOLDER = tominabox1/le_chiffre/rev1