* adding all ErgoTravel Files * fixing KC_KEYMAP to LAYOUT_kc on Viet's keymap.cpull/3132/head
@ -0,0 +1,90 @@ | |||||
/* | |||||
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef REV1_CONFIG_H | |||||
#define REV1_CONFIG_H | |||||
#include QMK_KEYBOARD_CONFIG_H | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xCEEB | |||||
#define PRODUCT_ID 0x1256 | |||||
#define DEVICE_VER 0x0100 | |||||
#define MANUFACTURER JPConstantineau.com | |||||
#define PRODUCT ErgoTravel Keyboard | |||||
#define DESCRIPTION Split 45 percent ergonomic keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 7 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { C6, D7, E6, B4 } | |||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* number of backlight levels */ | |||||
// #define BACKLIGHT_LEVELS 3 | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
#define BACKLIGHT_PIN B5 | |||||
#define BACKLIGHT_LEVELS 5 | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_TIMER | |||||
#define RGBLED_NUM 12 // Number of LEDs | |||||
#define ws2812_PORTREG PORTD | |||||
#define ws2812_DDRREG DDRD | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
// #define NO_DEBUG | |||||
/* disable print */ | |||||
// #define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
@ -0,0 +1 @@ | |||||
#include "ergotravel.h" |
@ -0,0 +1,24 @@ | |||||
#ifndef ERGOTRAVEL_H | |||||
#define ERGOTRAVEL_H | |||||
#ifdef KEYBOARD_ergotravel_rev1 | |||||
#include "rev1.h" | |||||
#endif | |||||
#include "quantum.h" | |||||
// Used to create a keymap using only KC_ prefixed keys | |||||
#define LAYOUT_kc( \ | |||||
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05, R06, \ | |||||
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15, R16,\ | |||||
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25, R26,\ | |||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||||
) \ | |||||
LAYOUT( \ | |||||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ | |||||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ | |||||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ | |||||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ | |||||
) | |||||
#endif |
@ -0,0 +1,162 @@ | |||||
#include <util/twi.h> | |||||
#include <avr/io.h> | |||||
#include <stdlib.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/twi.h> | |||||
#include <stdbool.h> | |||||
#include "i2c.h" | |||||
#ifdef USE_I2C | |||||
// Limits the amount of we wait for any one i2c transaction. | |||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is | |||||
// 9 bits, a single transaction will take around 90μs to complete. | |||||
// | |||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit | |||||
// poll loop takes at least 8 clock cycles to execute | |||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 | |||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) | |||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; | |||||
static volatile uint8_t slave_buffer_pos; | |||||
static volatile bool slave_has_register_set = false; | |||||
// Wait for an i2c operation to finish | |||||
inline static | |||||
void i2c_delay(void) { | |||||
uint16_t lim = 0; | |||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) | |||||
lim++; | |||||
// easier way, but will wait slightly longer | |||||
// _delay_us(100); | |||||
} | |||||
// Setup twi to run at 100kHz | |||||
void i2c_master_init(void) { | |||||
// no prescaler | |||||
TWSR = 0; | |||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. | |||||
// Check datasheets for more info. | |||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2; | |||||
} | |||||
// Start a transaction with the given i2c slave address. The direction of the | |||||
// transfer is set with I2C_READ and I2C_WRITE. | |||||
// returns: 0 => success | |||||
// 1 => error | |||||
uint8_t i2c_master_start(uint8_t address) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); | |||||
i2c_delay(); | |||||
// check that we started successfully | |||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) | |||||
return 1; | |||||
TWDR = address; | |||||
TWCR = (1<<TWINT) | (1<<TWEN); | |||||
i2c_delay(); | |||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) | |||||
return 1; // slave did not acknowledge | |||||
else | |||||
return 0; // success | |||||
} | |||||
// Finish the i2c transaction. | |||||
void i2c_master_stop(void) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); | |||||
uint16_t lim = 0; | |||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) | |||||
lim++; | |||||
} | |||||
// Write one byte to the i2c slave. | |||||
// returns 0 => slave ACK | |||||
// 1 => slave NACK | |||||
uint8_t i2c_master_write(uint8_t data) { | |||||
TWDR = data; | |||||
TWCR = (1<<TWINT) | (1<<TWEN); | |||||
i2c_delay(); | |||||
// check if the slave acknowledged us | |||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; | |||||
} | |||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, | |||||
// if ack=0 the acknowledge bit is not set. | |||||
// returns: byte read from i2c device | |||||
uint8_t i2c_master_read(int ack) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); | |||||
i2c_delay(); | |||||
return TWDR; | |||||
} | |||||
void i2c_reset_state(void) { | |||||
TWCR = 0; | |||||
} | |||||
void i2c_slave_init(uint8_t address) { | |||||
TWAR = address << 0; // slave i2c address | |||||
// TWEN - twi enable | |||||
// TWEA - enable address acknowledgement | |||||
// TWINT - twi interrupt flag | |||||
// TWIE - enable the twi interrupt | |||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); | |||||
} | |||||
ISR(TWI_vect); | |||||
ISR(TWI_vect) { | |||||
uint8_t ack = 1; | |||||
switch(TW_STATUS) { | |||||
case TW_SR_SLA_ACK: | |||||
// this device has been addressed as a slave receiver | |||||
slave_has_register_set = false; | |||||
break; | |||||
case TW_SR_DATA_ACK: | |||||
// this device has received data as a slave receiver | |||||
// The first byte that we receive in this transaction sets the location | |||||
// of the read/write location of the slaves memory that it exposes over | |||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing | |||||
// slave_buffer_pos after each write. | |||||
if(!slave_has_register_set) { | |||||
slave_buffer_pos = TWDR; | |||||
// don't acknowledge the master if this memory loctaion is out of bounds | |||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { | |||||
ack = 0; | |||||
slave_buffer_pos = 0; | |||||
} | |||||
slave_has_register_set = true; | |||||
} else { | |||||
i2c_slave_buffer[slave_buffer_pos] = TWDR; | |||||
BUFFER_POS_INC(); | |||||
} | |||||
break; | |||||
case TW_ST_SLA_ACK: | |||||
case TW_ST_DATA_ACK: | |||||
// master has addressed this device as a slave transmitter and is | |||||
// requesting data. | |||||
TWDR = i2c_slave_buffer[slave_buffer_pos]; | |||||
BUFFER_POS_INC(); | |||||
break; | |||||
case TW_BUS_ERROR: // something went wrong, reset twi state | |||||
TWCR = 0; | |||||
default: | |||||
break; | |||||
} | |||||
// Reset everything, so we are ready for the next TWI interrupt | |||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); | |||||
} | |||||
#endif |
@ -0,0 +1,49 @@ | |||||
#ifndef I2C_H | |||||
#define I2C_H | |||||
#include <stdint.h> | |||||
#ifndef F_CPU | |||||
#define F_CPU 16000000UL | |||||
#endif | |||||
#define I2C_READ 1 | |||||
#define I2C_WRITE 0 | |||||
#define I2C_ACK 1 | |||||
#define I2C_NACK 0 | |||||
#define SLAVE_BUFFER_SIZE 0x10 | |||||
// i2c SCL clock frequency | |||||
#define SCL_CLOCK 100000L | |||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; | |||||
void i2c_master_init(void); | |||||
uint8_t i2c_master_start(uint8_t address); | |||||
void i2c_master_stop(void); | |||||
uint8_t i2c_master_write(uint8_t data); | |||||
uint8_t i2c_master_read(int); | |||||
void i2c_reset_state(void); | |||||
void i2c_slave_init(uint8_t address); | |||||
static inline unsigned char i2c_start_read(unsigned char addr) { | |||||
return i2c_master_start((addr << 1) | I2C_READ); | |||||
} | |||||
static inline unsigned char i2c_start_write(unsigned char addr) { | |||||
return i2c_master_start((addr << 1) | I2C_WRITE); | |||||
} | |||||
// from SSD1306 scrips | |||||
extern unsigned char i2c_rep_start(unsigned char addr); | |||||
extern void i2c_start_wait(unsigned char addr); | |||||
extern unsigned char i2c_readAck(void); | |||||
extern unsigned char i2c_readNak(void); | |||||
extern unsigned char i2c_read(unsigned char ack); | |||||
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); | |||||
#endif |
@ -0,0 +1,15 @@ | |||||
{ | |||||
"keyboard_name": "ErgoTravel", | |||||
"manufacturer": "jpconstantineau", | |||||
"identifier": "0x1256", | |||||
"url": "https://github.com/jpconstantineau/ErgoTravel", | |||||
"maintainer": "qmk", | |||||
"processor": "atmega32u4", | |||||
"width": 14.5, | |||||
"height": 5, | |||||
"layouts": { | |||||
"LAYOUT": { | |||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,46 @@ | |||||
/* | |||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_USER_H | |||||
#define CONFIG_USER_H | |||||
#include "config_common.h" | |||||
/* Use I2C or Serial, not both */ | |||||
//#define USE_SERIAL | |||||
#define USE_I2C | |||||
/* Select hand configuration */ | |||||
//#define MASTER_LEFT | |||||
#define MASTER_RIGHT | |||||
//#define EE_HANDS | |||||
#define TAPPING_TOGGLE 2 | |||||
// required if modifiers are defined in layers besided the default one. | |||||
#define PREVENT_STUCK_MODIFIERS | |||||
#undef RGBLED_NUM | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 12 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#endif |
@ -0,0 +1,202 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#define _COLEMAK 0 | |||||
#define _QWERTY 1 | |||||
#define _NUMPAD 2 | |||||
#define _LOWER 3 | |||||
#define _RAISE 4 | |||||
#define _ADJUST 16 | |||||
enum custom_keycodes { | |||||
COLEMAK = SAFE_RANGE, | |||||
QWERTY, | |||||
NUMPAD, | |||||
LOWER, | |||||
RAISE, | |||||
ADJUST, | |||||
}; | |||||
/* Fn keys */ | |||||
enum { | |||||
F_SFT = 0, | |||||
F_ALT, | |||||
F_CTRL, | |||||
F_NUMPAD | |||||
// F_LOWER, | |||||
// F_RAISE, | |||||
}; | |||||
#define KC_ KC_TRNS | |||||
#define _______ KC_TRNS | |||||
#define KC_XXXX KC_NO | |||||
#define KC_CMK COLEMAK | |||||
#define KC_QWE QWERTY | |||||
#define KC_LOWR LOWER | |||||
#define KC_RASE RAISE | |||||
#define KC_QRAS QRAISE | |||||
#define KC_ADJT ADJUST | |||||
#define KC_RST RESET | |||||
#define KC_BL_S BL_STEP | |||||
#define KC_DBUG DEBUG | |||||
#define KC_RTOG RGB_TOG | |||||
#define KC_RMOD RGB_MOD | |||||
#define KC_RHUI RGB_HUI | |||||
#define KC_RHUD RGB_HUD | |||||
#define KC_RSAI RGB_SAI | |||||
#define KC_RSAD RGB_SAD | |||||
#define KC_RVAI RGB_VAI | |||||
#define KC_RVAD RGB_VAD | |||||
//#define KC_CATDEL LCTL(LALT(KC_DEL)) // Ctrl alt del | |||||
#define KC_CPY LCTL(KC_C) | |||||
#define KC_PST LCTL(KC_V) | |||||
#define KC_SELA LCTL(KC_A) | |||||
#define KC_UDO LCTL(KC_Z) | |||||
#define KC_CUT LCTL(KC_X) | |||||
#define KC_SVE LCTL(KC_S) | |||||
#define KC_OSH F(F_SFT) | |||||
#define KC_OCTL F(F_CTRL) | |||||
#define KC_NUMP F(F_NUMPAD) | |||||
#define KC_SHESC MT(MOD_LSFT,KC_ESC) | |||||
#define KC_SHENT MT(MOD_RSFT,KC_ENT) | |||||
//#define KC_NUMP TG(_NUMPAD) // Toggle layer NUMPAD for use in KC_keymaps | |||||
//#define KC_RST RESET | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
// Colemak Mod-DH is used. https://colemakmods.github.io/mod-dh/ | |||||
[_COLEMAK] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
TAB , Q , W , F , P , B ,LPRN, RPRN, J , L , U , Y ,SCLN,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
BSPC, A , R , S , T , G ,EQL , MINS, K , N , E , I , O ,QUOT, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
SHESC, Z , X , C , D , V ,NUMP, ENT, M , H ,COMM,DOT ,SLSH,SHENT, | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
OCTL,LALT,LGUI,DEL ,LOWR, SPC, OSH, RASE,LEFT,RIGHT,RALT,RCTL | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_QWERTY] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,QUOT, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , , , N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,DEL , , SPC, SPC , ,LEFT,DOWN, UP ,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_NUMPAD] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
, , , , , , , ,ASTR, P7 , P8 , P9 ,SLSH, , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , ,PIPE, P4 , P5 , P6 ,MINS, , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , ,COMM, P1 , P2 , P3 ,PLUS, , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , P0 ,NLCK, , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_LOWER] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
,XXXX,XXXX,XXXX,XXXX,CAPS, , ,PGUP,HOME, UP ,END ,DEL , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
,SELA,LALT,LSFT,LCTL,SVE , , ,PGDN,LEFT,DOWN,RGHT,BSPC,INS , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
,UDO ,CUT ,CPY ,PST ,XXXX, , ,XXXX,XXXX,COMM,DOT ,SLSH, , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_RAISE] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
,AMPR,PERC,HASH,EXLM,LPRN, , ,ASTR,RPRN, AT ,DLR ,CIRC,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, 7 , 5 , 3 , 1 , 9 ,LBRC, RBRC, 8 , 0 , 2 , 4 , 6 ,BSLS, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, GRV,TILD,XXXX,EQL ,PLUS, , ,UNDS,MINS,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_ADJUST] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
, F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , , , CMK,QWE , , , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , , , , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , ,VOLD,VOLU,MUTE | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
) | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT) | |||||
,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT) | |||||
,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL) | |||||
,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD) | |||||
// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER) // FN1 - Momentary Layer 1 (Lower) | |||||
// ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE) // FN2 - Momentary Layer 2 (Raise) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case COLEMAK: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_COLEMAK); | |||||
} | |||||
return false; | |||||
break; | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOWER: | |||||
if (record->event.pressed) { | |||||
layer_on(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case RAISE: | |||||
if (record->event.pressed) { | |||||
layer_on(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,3 @@ | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,41 @@ | |||||
/* | |||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_USER_H | |||||
#define CONFIG_USER_H | |||||
#include "config_common.h" | |||||
/* Use I2C or Serial, not both */ | |||||
#define USE_SERIAL | |||||
// #define USE_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS | |||||
#undef RGBLED_NUM | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 12 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#endif |
@ -0,0 +1,134 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define _ADJUST 16 | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
LOWER, | |||||
RAISE, | |||||
ADJUST, | |||||
}; | |||||
#define KC_ KC_TRNS | |||||
#define _______ KC_TRNS | |||||
#define KC_LOWR LOWER | |||||
#define KC_RASE RAISE | |||||
#define KC_ADJT ADJUST | |||||
#define KC_RST RESET | |||||
#define KC_BL_S BL_STEP | |||||
#define KC_DBUG DEBUG | |||||
#define KC_RTOG RGB_TOG | |||||
#define KC_RMOD RGB_MOD | |||||
#define KC_RHUI RGB_HUI | |||||
#define KC_RHUD RGB_HUD | |||||
#define KC_RSAI RGB_SAI | |||||
#define KC_RSAD RGB_SAD | |||||
#define KC_RVAI RGB_VAI | |||||
#define KC_RVAD RGB_VAD | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_QWERTY] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_LOWER] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_RAISE] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_ADJUST] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
#ifdef AUDIO_ENABLE | |||||
PLAY_SONG(tone_qwerty); | |||||
#endif | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOWER: | |||||
if (record->event.pressed) { | |||||
layer_on(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case RAISE: | |||||
if (record->event.pressed) { | |||||
layer_on(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,3 @@ | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,41 @@ | |||||
/* | |||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_USER_H | |||||
#define CONFIG_USER_H | |||||
#include "config_common.h" | |||||
/* Use I2C or Serial, not both */ | |||||
#define USE_SERIAL | |||||
// #define USE_I2C | |||||
/* Select hand configuration */ | |||||
// #define MASTER_LEFT | |||||
#define MASTER_RIGHT | |||||
// #define EE_HANDS | |||||
#undef RGBLED_NUM | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 12 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#endif |
@ -0,0 +1,95 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
enum custom_layers { | |||||
_COLEMAK, | |||||
_ADJUST, | |||||
_RAISE, | |||||
_LOWER, | |||||
_QWERTY | |||||
}; | |||||
#define _______ KC_TRNS | |||||
#define XXXXXXX KC_NO | |||||
#define BASELYR TO(_COLEMAK) // base layer | |||||
#define LOWER MO(_LOWER) // momentary lower layer | |||||
#define RAISE MO(_RAISE) // momentary raise layer | |||||
#define ADJUST MO(_ADJUST) // momentary adjust layer | |||||
#define QWERTY TG(_QWERTY) | |||||
#define LLOWER TG(_LOWER) // lock for lower layer | |||||
#define LRAISE TG(_RAISE) // lock for raise layer | |||||
#define LHALF LALT(LGUI(KC_LEFT)) // spec left half screen | |||||
#define TLHALF LCTL(LGUI(KC_LEFT)) // spec top left half | |||||
#define BLHALF LCTL(LSFT(LGUI(KC_LEFT))) // spec bottom left half | |||||
#define RHALF LALT(LGUI(KC_RIGHT)) // spec right half screen | |||||
#define TRHALF LCTL(LGUI(KC_RIGHT)) // spec top right half | |||||
#define BRHALF LCTL(LSFT(LGUI(KC_RIGHT))) // spec bottom right half | |||||
#define SAFBCK LGUI(KC_LBRC) // safari back | |||||
#define SAFFWD LGUI(KC_RBRC) // safari forward | |||||
#define CENTER LALT(LGUI(KC_C)) // spec center | |||||
#define FULL LALT(LGUI(KC_F)) // spec full screen | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_COLEMAK] = LAYOUT( | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_G ,KC_LCBR, KC_RCBR, KC_J , KC_L , KC_U , KC_Y ,KC_SCLN,KC_BSPC, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_D ,KC_LPRN, KC_RPRN, KC_H , KC_N , KC_E , KC_I , KC_O ,KC_QUOT, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
KC_BSLS, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBRC , KC_RBRC , KC_K , KC_M ,KC_COMM, KC_DOT,KC_SLSH,KC_ENT , | |||||
//,------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------. | |||||
ADJUST ,KC_LCTL,KC_LALT,KC_LGUI, LOWER, KC_SPC, KC_LSFT, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RGHT | |||||
//,------+-------+-------+-------+-------/-------/ \-------\-------+-------+-------+-------+-------' | |||||
), | |||||
[_ADJUST] = LAYOUT( | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
BASELYR,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RESET , | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, | |||||
//|------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------. | |||||
_______,KC_F10 ,KC_F11 ,KC_F12 ,LLOWER ,XXXXXXX, XXXXXXX,LRAISE ,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX | |||||
//`------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------' | |||||
), | |||||
[_RAISE] = LAYOUT( | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
BASELYR,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, TLHALF, CENTER, TRHALF, XXXXXXX, KC_BSPC, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
KC_TILD,KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, LHALF, FULL, RHALF, XXXXXXX, KC_VOLU, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
KC_GRV, KC_MINS,KC_PLUS,KC_UNDS,KC_EQL, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, BLHALF, XXXXXXX, BRHALF, XXXXXXX, KC_VOLD, | |||||
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------| | |||||
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_TRNS,KC_SPC, KC_LSFT, KC_TRNS, XXXXXXX, KC_F14, KC_F15, KC_MUTE | |||||
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------' | |||||
), | |||||
[_LOWER] = LAYOUT( | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
BASELYR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, KC_7, KC_8, KC_9, KC_MINS, KC_BSPC, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
XXXXXXX, XXXXXXX, SAFBCK, XXXXXXX, SAFFWD, KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, KC_4, KC_5, KC_6, KC_PLUS, XXXXXXX, | |||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------. | |||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, KC_1, KC_2, KC_3, KC_ASTR, KC_ENT, | |||||
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------| | |||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_SPC, KC_LSFT, KC_0, KC_0, KC_DOT, KC_SLASH, XXXXXXX | |||||
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------' | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
} | |||||
return true; | |||||
} | |||||
@ -0,0 +1,3 @@ | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,41 @@ | |||||
/* | |||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_USER_H | |||||
#define CONFIG_USER_H | |||||
#include "config_common.h" | |||||
/* Use I2C or Serial, not both */ | |||||
#define USE_SERIAL | |||||
// #define USE_I2C | |||||
/* Select hand configuration */ | |||||
#define MASTER_LEFT | |||||
// #define MASTER_RIGHT | |||||
// #define EE_HANDS | |||||
#undef RGBLED_NUM | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 12 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#endif |
@ -0,0 +1,129 @@ | |||||
#include QMK_KEYBOARD_H | |||||
extern keymap_config_t keymap_config; | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define _ADJUST 16 | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
LOWER, | |||||
RAISE, | |||||
ADJUST, | |||||
}; | |||||
#define KC_ KC_TRNS | |||||
#define _______ KC_TRNS | |||||
#define KC_LOWR LOWER | |||||
#define KC_RASE RAISE | |||||
#define KC_ADJT ADJUST | |||||
#define KC_RST RESET | |||||
#define KC_BL_S BL_STEP | |||||
#define KC_DBUG DEBUG | |||||
#define KC_RTOG RGB_TOG | |||||
#define KC_RMOD RGB_MOD | |||||
#define KC_RHUI RGB_HUI | |||||
#define KC_RHUD RGB_HUD | |||||
#define KC_RSAI RGB_SAI | |||||
#define KC_RSAD RGB_SAD | |||||
#define KC_RVAI RGB_VAI | |||||
#define KC_RVAD RGB_VAD | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_QWERTY] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_LOWER] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_RAISE] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_ADJUST] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
set_single_persistent_default_layer(_QWERTY); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOWER: | |||||
if (record->event.pressed) { | |||||
layer_on(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case RAISE: | |||||
if (record->event.pressed) { | |||||
layer_on(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,3 @@ | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,42 @@ | |||||
/* | |||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_USER_H | |||||
#define CONFIG_USER_H | |||||
#include "config_common.h" | |||||
/* Use I2C or Serial, not both */ | |||||
#define USE_SERIAL | |||||
// #define USE_I2C | |||||
/* Select hand configuration */ | |||||
//#define MASTER_LEFT | |||||
#define MASTER_RIGHT | |||||
// #define EE_HANDS | |||||
#undef RGBLED_NUM | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLED_NUM 26 | |||||
#define RGBLIGHT_HUE_STEP 20 | |||||
#define RGBLIGHT_SAT_STEP 20 | |||||
#define RGBLIGHT_VAL_STEP 20 | |||||
#define RGBLIGHT_LIMIT_VAL 220 | |||||
#endif |
@ -0,0 +1,327 @@ | |||||
#include "ergotravel.h" | |||||
#include "action_layer.h" | |||||
#include "eeconfig.h" | |||||
#include "mousekey.h" | |||||
#include "process_unicode.h" | |||||
extern keymap_config_t keymap_config; | |||||
#define _QWERTY 0 | |||||
#define _NUMBERS 1 | |||||
#define _SYMBOLS 2 | |||||
#define _CODING 3 | |||||
#define _NAVIGATION 4 | |||||
#define _ADJUST 16 | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
ADJUST, | |||||
CODING_SPACE, | |||||
NUMBERS_SPACE, | |||||
SYMBOLS_SPACE, | |||||
NAVIGATE_SPACE, | |||||
TABLE_FLIP, | |||||
RESET_TABLE, | |||||
SHRUG, | |||||
LOOK_OF_DISAPPROVAL | |||||
}; | |||||
#define KC_ KC_TRNS | |||||
#define _______ KC_TRNS | |||||
#define KC_ADJT MO(_ADJUST) | |||||
#define KC_RST RESET | |||||
#define KC_BL_S BL_STEP | |||||
#define KC_DBUG DEBUG | |||||
#define KC_RTOG RGB_TOG | |||||
#define KC_RMOD RGB_MOD | |||||
#define KC_RHUI RGB_HUI | |||||
#define KC_RHUD RGB_HUD | |||||
#define KC_RSAI RGB_SAI | |||||
#define KC_RSAD RGB_SAD | |||||
#define KC_RVAI RGB_VAI | |||||
#define KC_RVAD RGB_VAD | |||||
#define KC_RSEN MT(MOD_RSFT, KC_ENT) // Tap for enter, hold for right shift | |||||
#define KC_LCCA MT(MOD_LCTL, KC_CAPS) // Tap for caps lock, hold for left control | |||||
#define KC_SHDE MT(MOD_LSFT, KC_DEL) // Tap for delete, hold for left shift | |||||
#define KC_NAVI MO(_NAVIGATION) | |||||
#define KC_COSP CODING_SPACE | |||||
#define KC_NUSP NUMBERS_SPACE | |||||
#define KC_SYSP SYMBOLS_SPACE | |||||
#define KC_NASP NAVIGATE_SPACE | |||||
#define KC_FLIP TABLE_FLIP | |||||
#define KC_TSET RESET_TABLE | |||||
#define KC_SRUG SHRUG | |||||
#define KC_DISA LOOK_OF_DISAPPROVAL | |||||
#define KC_RST RESET | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_QWERTY] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
TAB , Q , W , E , R , T ,HOME, PGUP, Y , U , I , O , P ,BSPC, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
LCCA, A , S , D , F , G ,END , PGDN, H , J , K , L ,SCLN,QUOT, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
SHDE, Z , X , C , V , B ,LGUI, RALT, N , M ,COMM,DOT ,SLSH,RSEN, | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
ESC ,ADJT,LALT,ENT ,NUSP,NASP, SYSP,COSP,RCTL,NAVI,ADJT,DEL | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_NUMBERS] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
GRAVE, 1 , 2 , 3 , 4 , 5 ,MPLY, VOLU, 6 , 7 , 8 , 9 , 0 , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , ,MNXT, VOLD,FLIP,TSET,SRUG,DISA, , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , , , , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_SYMBOLS] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
GRAVE,EXLM, AT ,HASH,DLR ,PERC,MPLY, VOLU,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS, | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , ,MNXT, VOLD, , , , , , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , , , , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_CODING] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
, , ,LCBR,RCBR, ,MPLY, VOLU, ,AMPR,PIPE,DLR , , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , ,LPRN,RPRN, ,MNXT, VOLD, ,UNDS,MINS,ASTR, , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , ,LBRC,RBRC, , , , ,PLUS,EQL , , , , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_NAVIGATION] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
, , , UP , , ,MPLY, VOLU,WH_U,BTN1,MS_U,BTN1, , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, ,LEFT,DOWN,RGHT, ,MNXT, VOLD,WH_D,MS_L,MS_D,MS_R, , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , , , , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
), | |||||
[_ADJUST] = LAYOUT_kc( | |||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. | |||||
F1 ,F2 ,F3 ,F4 ,F5 ,F6 , , ,F7 ,F8 ,F9 ,F10 ,F11 ,F12 , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
,RTOG,RVAI,RHUI,RSAI, , , , , , , , , , | |||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||||
,RMOD,RVAD,RHUD,RSAD, , , ,RST , , , , , , | |||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----| | |||||
, , , , , , , , , , , | |||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----' | |||||
) | |||||
}; | |||||
#ifdef AUDIO_ENABLE | |||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND); | |||||
#endif | |||||
void persistent_default_layer_set(uint16_t default_layer) { | |||||
eeconfig_update_default_layer(default_layer); | |||||
default_layer_set(default_layer); | |||||
} | |||||
uint16_t custom_lt_timer; | |||||
keypos_t prv_key_pressed; | |||||
// Runs just one time when the keyboard initializes. | |||||
void matrix_init_user(void) { | |||||
// set_unicode_input_mode(UC_LNX); // Linux | |||||
set_unicode_input_mode(UC_OSX); // Mac OSX | |||||
// set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki) | |||||
//set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki) | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
if(record->event.pressed) prv_key_pressed = record->event.key; | |||||
#define IS_KEYPOS_SAME(keyone,keytwo) ((keyone.col==keytwo.col)&&(keyone.row==keytwo.row)) | |||||
#define ANOTHER_KEY_PRESSED (!IS_KEYPOS_SAME(prv_key_pressed, record->event.key)) | |||||
inline void tap(uint16_t keycode) { | |||||
register_code(keycode); | |||||
unregister_code(keycode); | |||||
}; | |||||
inline void swapInput(void) { | |||||
register_code(KC_LGUI); | |||||
tap(KC_SPC); | |||||
unregister_code(KC_LGUI); | |||||
}; | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
#ifdef AUDIO_ENABLE | |||||
PLAY_SONG(tone_qwerty); | |||||
#endif | |||||
persistent_default_layer_set(1UL<<_QWERTY); | |||||
} | |||||
return false; | |||||
break; | |||||
case CODING_SPACE: | |||||
if (record->event.pressed) { | |||||
custom_lt_timer = timer_read(); | |||||
layer_on(_CODING); | |||||
} else { | |||||
layer_off(_CODING); | |||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { | |||||
register_code(KC_SPC); | |||||
unregister_code(KC_SPC); | |||||
} | |||||
} | |||||
return false; | |||||
break; | |||||
case NUMBERS_SPACE: | |||||
if (record->event.pressed) { | |||||
custom_lt_timer = timer_read(); | |||||
layer_on(_NUMBERS); | |||||
} else { | |||||
layer_off(_NUMBERS); | |||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { | |||||
register_code(KC_SPC); | |||||
unregister_code(KC_SPC); | |||||
} | |||||
} | |||||
return false; | |||||
break; | |||||
case SYMBOLS_SPACE: | |||||
if (record->event.pressed) { | |||||
custom_lt_timer = timer_read(); | |||||
layer_on(_SYMBOLS); | |||||
} else { | |||||
layer_off(_SYMBOLS); | |||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { | |||||
register_code(KC_SPC); | |||||
unregister_code(KC_SPC); | |||||
} | |||||
} | |||||
return false; | |||||
break; | |||||
case NAVIGATE_SPACE: | |||||
if (record->event.pressed) { | |||||
custom_lt_timer = timer_read(); | |||||
layer_on(_NAVIGATION); | |||||
} else { | |||||
layer_off(_NAVIGATION); | |||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) { | |||||
register_code(KC_SPC); | |||||
unregister_code(KC_SPC); | |||||
} | |||||
} | |||||
return false; | |||||
break; | |||||
case TABLE_FLIP: | |||||
if (record->event.pressed) { | |||||
swapInput(); | |||||
register_code(KC_RSFT); | |||||
tap(KC_9); | |||||
unregister_code(KC_RSFT); | |||||
process_unicode((0x256F|QK_UNICODE), record); // Arm | |||||
process_unicode((0x00B0|QK_UNICODE), record); // Eye | |||||
process_unicode((0x25A1|QK_UNICODE), record); // Mouth | |||||
process_unicode((0x00B0|QK_UNICODE), record); // Eye | |||||
register_code(KC_RSFT); | |||||
tap(KC_0); | |||||
unregister_code(KC_RSFT); | |||||
process_unicode((0x256F|QK_UNICODE), record); // Arm | |||||
tap(KC_SPC); | |||||
process_unicode((0x0361|QK_UNICODE), record); // Flippy | |||||
tap(KC_SPC); | |||||
process_unicode((0x253B|QK_UNICODE), record); // Table | |||||
process_unicode((0x2501|QK_UNICODE), record); // Table | |||||
process_unicode((0x253B|QK_UNICODE), record); // Table | |||||
swapInput(); | |||||
} | |||||
return false; | |||||
break; | |||||
case RESET_TABLE: // ┬──┬ ノ( ゜-゜ノ) | |||||
if (record->event.pressed) { | |||||
swapInput(); | |||||
process_unicode((0x252C|QK_UNICODE), record); // Table | |||||
process_unicode((0x2500|QK_UNICODE), record); // Table | |||||
process_unicode((0x2500|QK_UNICODE), record); // Table | |||||
process_unicode((0x252C|QK_UNICODE), record); // Table | |||||
tap(KC_SPC); | |||||
process_unicode((0x30CE|QK_UNICODE), record); // Arm | |||||
register_code(KC_RSFT); | |||||
tap(KC_9); | |||||
unregister_code(KC_RSFT); | |||||
tap(KC_SPC); | |||||
process_unicode((0x309C|QK_UNICODE), record); // Eye | |||||
tap(KC_MINS); | |||||
process_unicode((0x309C|QK_UNICODE), record); // Eye | |||||
process_unicode((0x30CE|QK_UNICODE), record); // Arm | |||||
register_code(KC_RSFT); | |||||
tap(KC_0); | |||||
unregister_code(KC_RSFT); | |||||
swapInput(); | |||||
} | |||||
return false; | |||||
break; | |||||
case SHRUG: // ¯\_(ツ)_/¯ | |||||
if (record->event.pressed) { | |||||
swapInput(); | |||||
process_unicode((0x00AF|QK_UNICODE), record); // Hand | |||||
tap(KC_BSLS); // Arm | |||||
register_code(KC_RSFT); | |||||
tap(KC_UNDS); // Arm | |||||
tap(KC_LPRN); // Head | |||||
unregister_code(KC_RSFT); | |||||
process_unicode((0x30C4|QK_UNICODE), record); // Face | |||||
register_code(KC_RSFT); | |||||
tap(KC_RPRN); // Head | |||||
tap(KC_UNDS); // Arm | |||||
unregister_code(KC_RSFT); | |||||
tap(KC_SLSH); // Arm | |||||
process_unicode((0x00AF|QK_UNICODE), record); // Hand | |||||
swapInput(); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOOK_OF_DISAPPROVAL: // ಠ_ಠ | |||||
if(record->event.pressed){ | |||||
swapInput(); | |||||
process_unicode((0x0CA0|QK_UNICODE), record); // Eye | |||||
register_code(KC_RSFT); | |||||
tap(KC_MINS); | |||||
unregister_code(KC_RSFT); | |||||
process_unicode((0x0CA0|QK_UNICODE), record); // Eye | |||||
swapInput(); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,7 @@ | |||||
RGBLIGHT_ENABLE = yes | |||||
BACKLIGHT_ENABLE = no | |||||
UNICODE_ENABLE = yes | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,482 @@ | |||||
/* | |||||
Copyright 2018 Pierre Constantineau | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include "wait.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "matrix.h" | |||||
#include "split_util.h" | |||||
#include "pro_micro.h" | |||||
#include "config.h" | |||||
#include "timer.h" | |||||
#include "backlight.h" | |||||
#ifdef USE_I2C | |||||
# include "i2c.h" | |||||
#else // USE_SERIAL | |||||
# include "serial.h" | |||||
#endif | |||||
#ifndef DEBOUNCING_DELAY | |||||
# define DEBOUNCING_DELAY 5 | |||||
#endif | |||||
#if (DEBOUNCING_DELAY > 0) | |||||
static uint16_t debouncing_time; | |||||
static bool debouncing = false; | |||||
#endif | |||||
#if (MATRIX_COLS <= 8) | |||||
# define print_matrix_header() print("\nr/c 01234567\n") | |||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) | |||||
# define matrix_bitpop(i) bitpop(matrix[i]) | |||||
# define ROW_SHIFTER ((uint8_t)1) | |||||
#else | |||||
# error "Currently only supports 8 COLS" | |||||
#endif | |||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||||
#define ERROR_DISCONNECT_COUNT 5 | |||||
#define SERIAL_LED_ADDR 0x00 | |||||
#define ROWS_PER_HAND (MATRIX_ROWS/2) | |||||
static uint8_t error_count = 0; | |||||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; | |||||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; | |||||
/* matrix state(1:on, 0:off) */ | |||||
static matrix_row_t matrix[MATRIX_ROWS]; | |||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||||
#if (DIODE_DIRECTION == COL2ROW) | |||||
static void init_cols(void); | |||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); | |||||
static void unselect_rows(void); | |||||
static void select_row(uint8_t row); | |||||
static void unselect_row(uint8_t row); | |||||
#elif (DIODE_DIRECTION == ROW2COL) | |||||
static void init_rows(void); | |||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); | |||||
static void unselect_cols(void); | |||||
static void unselect_col(uint8_t col); | |||||
static void select_col(uint8_t col); | |||||
#endif | |||||
__attribute__ ((weak)) | |||||
void matrix_init_kb(void) { | |||||
matrix_init_user(); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_kb(void) { | |||||
matrix_scan_user(); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_init_user(void) { | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_user(void) { | |||||
} | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
debug_enable = true; | |||||
debug_matrix = true; | |||||
debug_mouse = true; | |||||
// initialize row and col | |||||
unselect_rows(); | |||||
init_cols(); | |||||
TX_RX_LED_INIT; | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = 0; | |||||
matrix_debouncing[i] = 0; | |||||
} | |||||
matrix_init_quantum(); | |||||
} | |||||
uint8_t _matrix_scan(void) | |||||
{ | |||||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND); | |||||
#if (DIODE_DIRECTION == COL2ROW) | |||||
// Set row, read cols | |||||
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { | |||||
# if (DEBOUNCING_DELAY > 0) | |||||
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); | |||||
if (matrix_changed) { | |||||
debouncing = true; | |||||
debouncing_time = timer_read(); | |||||
PORTD ^= (1 << 2); | |||||
} | |||||
# else | |||||
read_cols_on_row(matrix+offset, current_row); | |||||
# endif | |||||
} | |||||
#elif (DIODE_DIRECTION == ROW2COL) | |||||
// Set col, read rows | |||||
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { | |||||
# if (DEBOUNCING_DELAY > 0) | |||||
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); | |||||
if (matrix_changed) { | |||||
debouncing = true; | |||||
debouncing_time = timer_read(); | |||||
} | |||||
# else | |||||
read_rows_on_col(matrix+offset, current_col); | |||||
# endif | |||||
} | |||||
#endif | |||||
# if (DEBOUNCING_DELAY > 0) | |||||
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { | |||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { | |||||
matrix[i+offset] = matrix_debouncing[i+offset]; | |||||
} | |||||
debouncing = false; | |||||
} | |||||
# endif | |||||
return 1; | |||||
} | |||||
#ifdef USE_I2C | |||||
// Get rows from other half over i2c | |||||
int i2c_transaction(void) { | |||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); | |||||
if (err) goto i2c_error; | |||||
// start of matrix stored at 0x00 | |||||
err = i2c_master_write(0x00); | |||||
if (err) goto i2c_error; | |||||
#ifdef BACKLIGHT_ENABLE | |||||
// Write backlight level for slave to read | |||||
err = i2c_master_write(get_backlight_level()); | |||||
#else | |||||
// Write zero, so our byte index is the same | |||||
err = i2c_master_write(0x00); | |||||
#endif | |||||
if (err) goto i2c_error; | |||||
// Start read | |||||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); | |||||
if (err) goto i2c_error; | |||||
if (!err) { | |||||
int i; | |||||
for (i = 0; i < ROWS_PER_HAND-1; ++i) { | |||||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); | |||||
} | |||||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); | |||||
i2c_master_stop(); | |||||
} else { | |||||
i2c_error: // the cable is disconnceted, or something else went wrong | |||||
i2c_reset_state(); | |||||
return err; | |||||
} | |||||
return 0; | |||||
} | |||||
#else // USE_SERIAL | |||||
int serial_transaction(void) { | |||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||||
if (serial_update_buffers()) { | |||||
return 1; | |||||
} | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
matrix[slaveOffset+i] = serial_slave_buffer[i]; | |||||
} | |||||
#ifdef BACKLIGHT_ENABLE | |||||
// Write backlight level for slave to read | |||||
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level(); | |||||
#endif | |||||
return 0; | |||||
} | |||||
#endif | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
uint8_t ret = _matrix_scan(); | |||||
#ifdef USE_I2C | |||||
if( i2c_transaction() ) { | |||||
#else // USE_SERIAL | |||||
if( serial_transaction() ) { | |||||
#endif | |||||
// turn on the indicator led when halves are disconnected | |||||
TXLED1; | |||||
error_count++; | |||||
if (error_count > ERROR_DISCONNECT_COUNT) { | |||||
// reset other half if disconnected | |||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
matrix[slaveOffset+i] = 0; | |||||
} | |||||
} | |||||
} else { | |||||
// turn off the indicator led on no error | |||||
TXLED0; | |||||
error_count = 0; | |||||
} | |||||
matrix_scan_quantum(); | |||||
return ret; | |||||
} | |||||
void matrix_slave_scan(void) { | |||||
_matrix_scan(); | |||||
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; | |||||
#ifdef USE_I2C | |||||
#ifdef BACKLIGHT_ENABLE | |||||
// Read backlight level sent from master and update level on slave | |||||
backlight_set(i2c_slave_buffer[0]); | |||||
#endif | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
i2c_slave_buffer[i+1] = matrix[offset+i]; | |||||
} | |||||
#else // USE_SERIAL | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
serial_slave_buffer[i] = matrix[offset+i]; | |||||
} | |||||
#ifdef BACKLIGHT_ENABLE | |||||
// Read backlight level sent from master and update level on slave | |||||
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); | |||||
#endif | |||||
#endif | |||||
} | |||||
bool matrix_is_modified(void) | |||||
{ | |||||
if (debouncing) return false; | |||||
return true; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||||
} | |||||
inline | |||||
matrix_row_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 0123456789ABCDEF\n"); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
phex(row); print(": "); | |||||
pbin_reverse16(matrix_get_row(row)); | |||||
print("\n"); | |||||
} | |||||
} | |||||
uint8_t matrix_key_count(void) | |||||
{ | |||||
uint8_t count = 0; | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
count += bitpop16(matrix[i]); | |||||
} | |||||
return count; | |||||
} | |||||
#if (DIODE_DIRECTION == COL2ROW) | |||||
static void init_cols(void) | |||||
{ | |||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) { | |||||
uint8_t pin = col_pins[x]; | |||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||||
} | |||||
} | |||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) | |||||
{ | |||||
// Store last value of row prior to reading | |||||
matrix_row_t last_row_value = current_matrix[current_row]; | |||||
// Clear data in matrix row | |||||
current_matrix[current_row] = 0; | |||||
// Select row and wait for row selecton to stabilize | |||||
select_row(current_row); | |||||
wait_us(30); | |||||
// For each col... | |||||
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { | |||||
// Select the col pin to read (active low) | |||||
uint8_t pin = col_pins[col_index]; | |||||
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); | |||||
// Populate the matrix row with the state of the col pin | |||||
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); | |||||
} | |||||
// Unselect row | |||||
unselect_row(current_row); | |||||
return (last_row_value != current_matrix[current_row]); | |||||
} | |||||
static void select_row(uint8_t row) | |||||
{ | |||||
uint8_t pin = row_pins[row]; | |||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT | |||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW | |||||
} | |||||
static void unselect_row(uint8_t row) | |||||
{ | |||||
uint8_t pin = row_pins[row]; | |||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||||
} | |||||
static void unselect_rows(void) | |||||
{ | |||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { | |||||
uint8_t pin = row_pins[x]; | |||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||||
} | |||||
} | |||||
#elif (DIODE_DIRECTION == ROW2COL) | |||||
static void init_rows(void) | |||||
{ | |||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { | |||||
uint8_t pin = row_pins[x]; | |||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||||
} | |||||
} | |||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) | |||||
{ | |||||
bool matrix_changed = false; | |||||
// Select col and wait for col selecton to stabilize | |||||
select_col(current_col); | |||||
wait_us(30); | |||||
// For each row... | |||||
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) | |||||
{ | |||||
// Store last value of row prior to reading | |||||
matrix_row_t last_row_value = current_matrix[row_index]; | |||||
// Check row pin state | |||||
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) | |||||
{ | |||||
// Pin LO, set col bit | |||||
current_matrix[row_index] |= (ROW_SHIFTER << current_col); | |||||
} | |||||
else | |||||
{ | |||||
// Pin HI, clear col bit | |||||
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); | |||||
} | |||||
// Determine if the matrix changed state | |||||
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) | |||||
{ | |||||
matrix_changed = true; | |||||
} | |||||
} | |||||
// Unselect col | |||||
unselect_col(current_col); | |||||
return matrix_changed; | |||||
} | |||||
static void select_col(uint8_t col) | |||||
{ | |||||
uint8_t pin = col_pins[col]; | |||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT | |||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW | |||||
} | |||||
static void unselect_col(uint8_t col) | |||||
{ | |||||
uint8_t pin = col_pins[col]; | |||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||||
} | |||||
static void unselect_cols(void) | |||||
{ | |||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) { | |||||
uint8_t pin = col_pins[x]; | |||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN | |||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI | |||||
} | |||||
} | |||||
#endif |
@ -0,0 +1,28 @@ | |||||
ErgoTravel | |||||
==== | |||||
![ErgoTravel](https://i.imgur.com/H9t6Q7b.png) | |||||
A split ergo 4x6 keyboard with 2 or 3 thumb keys and extra inner macro keys designed by Pierre Constantineau. [More info on the GitHub Repo](https://github.com/jpconstantineau/ErgoTravel). | |||||
**Status** The ErgoTravel is currently being beta-tested. | |||||
Keyboard Maintainer: [/u/jpconstantineau](https://github.com/jpconstantineau) | |||||
Hardware Supported: Pro Micro (ATmega32U4) | |||||
Hardware Availability: [Group Buys](https://keyboards.jpconstantineau.com/) or order your own [yourself](https://github.com/jpconstantineau/ErgoTravel/blob/master/OrderingInstructions.md) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make ergotravel/rev1:default | |||||
Example of flashing this keyboard: | |||||
make ergotravel/rev1:default:avrdude | |||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||||
A build guide for this keyboard can be found here: [Build Guide](https://github.com/jpconstantineau) |
@ -0,0 +1,90 @@ | |||||
/* | |||||
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef REV1_CONFIG_H | |||||
#define REV1_CONFIG_H | |||||
#include QMK_KEYBOARD_CONFIG_H | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xCEEB | |||||
#define PRODUCT_ID 0x1256 | |||||
#define DEVICE_VER 0x0100 | |||||
#define MANUFACTURER JPConstantineau.com | |||||
#define PRODUCT ErgoTravel Keyboard | |||||
#define DESCRIPTION Split 45 percent ergonomic keyboard | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 7 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { C6, D7, E6, B4 } | |||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* number of backlight levels */ | |||||
// #define BACKLIGHT_LEVELS 3 | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
#define BACKLIGHT_PIN B5 | |||||
#define BACKLIGHT_LEVELS 5 | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D3 | |||||
#define RGBLIGHT_TIMER | |||||
#define RGBLED_NUM 12 // Number of LEDs | |||||
#define ws2812_PORTREG PORTD | |||||
#define ws2812_DDRREG DDRD | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
// #define NO_DEBUG | |||||
/* disable print */ | |||||
// #define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
@ -0,0 +1,22 @@ | |||||
#include "rev1.h" | |||||
#ifdef SSD1306OLED | |||||
void led_set_kb(uint8_t usb_led) { | |||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||||
led_set_user(usb_led); | |||||
} | |||||
#endif | |||||
void matrix_init_kb(void) { | |||||
// // green led on | |||||
// DDRD |= (1<<5); | |||||
// PORTD &= ~(1<<5); | |||||
// // orange led on | |||||
// DDRB |= (1<<0); | |||||
// PORTB &= ~(1<<0); | |||||
matrix_init_user(); | |||||
}; |
@ -0,0 +1,37 @@ | |||||
#ifndef REV1_H | |||||
#define REV1_H | |||||
#include "ergotravel.h" | |||||
//void promicro_bootloader_jmp(bool program); | |||||
#include "quantum.h" | |||||
#ifdef USE_I2C | |||||
#include <stddef.h> | |||||
#ifdef __AVR__ | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#endif | |||||
#endif | |||||
//void promicro_bootloader_jmp(bool program); | |||||
#define LAYOUT( \ | |||||
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05,R06, \ | |||||
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15,R16, \ | |||||
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25,R26, \ | |||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||||
) \ | |||||
{ \ | |||||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||||
{ L10, L11, L12, L13, L14, L15, L16 }, \ | |||||
{ L20, L21, L22, L23, L24, L25, L26 }, \ | |||||
{ L30, L31, L32, L33, L34, L35, KC_NO }, \ | |||||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||||
{ R26, R25, R24, R23, R22, R21, R20 }, \ | |||||
{ R35, R34, R33, R32, R31, R30, KC_NO } \ | |||||
} | |||||
#endif |
@ -0,0 +1 @@ | |||||
BACKLIGHT_ENABLE = no |
@ -0,0 +1,74 @@ | |||||
SRC += matrix.c \ | |||||
i2c.c \ | |||||
split_util.c \ | |||||
serial.c | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = caterina | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
MIDI_ENABLE = no # MIDI controls | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||||
SUBPROJECT_rev1 = yes | |||||
USE_I2C = yes # I2C is used between the sides | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
CUSTOM_MATRIX = yes | |||||
DEFAULT_FOLDER = ergotravel/rev1 |
@ -0,0 +1,228 @@ | |||||
/* | |||||
* WARNING: be careful changing this code, it is very timing dependent | |||||
*/ | |||||
#ifndef F_CPU | |||||
#define F_CPU 16000000 | |||||
#endif | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include <stdbool.h> | |||||
#include "serial.h" | |||||
#ifndef USE_I2C | |||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this | |||||
// value. | |||||
#define SERIAL_DELAY 24 | |||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; | |||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; | |||||
#define SLAVE_DATA_CORRUPT (1<<0) | |||||
volatile uint8_t status = 0; | |||||
inline static | |||||
void serial_delay(void) { | |||||
_delay_us(SERIAL_DELAY); | |||||
} | |||||
inline static | |||||
void serial_output(void) { | |||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK; | |||||
} | |||||
// make the serial pin an input with pull-up resistor | |||||
inline static | |||||
void serial_input(void) { | |||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; | |||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; | |||||
} | |||||
inline static | |||||
uint8_t serial_read_pin(void) { | |||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); | |||||
} | |||||
inline static | |||||
void serial_low(void) { | |||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; | |||||
} | |||||
inline static | |||||
void serial_high(void) { | |||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; | |||||
} | |||||
void serial_master_init(void) { | |||||
serial_output(); | |||||
serial_high(); | |||||
} | |||||
void serial_slave_init(void) { | |||||
serial_input(); | |||||
// Enable INT0 | |||||
EIMSK |= _BV(INT0); | |||||
// Trigger on falling edge of INT0 | |||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01)); | |||||
} | |||||
// Used by the master to synchronize timing with the slave. | |||||
static | |||||
void sync_recv(void) { | |||||
serial_input(); | |||||
// This shouldn't hang if the slave disconnects because the | |||||
// serial line will float to high if the slave does disconnect. | |||||
while (!serial_read_pin()); | |||||
serial_delay(); | |||||
} | |||||
// Used by the slave to send a synchronization signal to the master. | |||||
static | |||||
void sync_send(void) { | |||||
serial_output(); | |||||
serial_low(); | |||||
serial_delay(); | |||||
serial_high(); | |||||
} | |||||
// Reads a byte from the serial line | |||||
static | |||||
uint8_t serial_read_byte(void) { | |||||
uint8_t byte = 0; | |||||
serial_input(); | |||||
for ( uint8_t i = 0; i < 8; ++i) { | |||||
byte = (byte << 1) | serial_read_pin(); | |||||
serial_delay(); | |||||
_delay_us(1); | |||||
} | |||||
return byte; | |||||
} | |||||
// Sends a byte with MSB ordering | |||||
static | |||||
void serial_write_byte(uint8_t data) { | |||||
uint8_t b = 8; | |||||
serial_output(); | |||||
while( b-- ) { | |||||
if(data & (1 << b)) { | |||||
serial_high(); | |||||
} else { | |||||
serial_low(); | |||||
} | |||||
serial_delay(); | |||||
} | |||||
} | |||||
// interrupt handle to be used by the slave device | |||||
ISR(SERIAL_PIN_INTERRUPT) { | |||||
sync_send(); | |||||
uint8_t checksum = 0; | |||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { | |||||
serial_write_byte(serial_slave_buffer[i]); | |||||
sync_send(); | |||||
checksum += serial_slave_buffer[i]; | |||||
} | |||||
serial_write_byte(checksum); | |||||
sync_send(); | |||||
// wait for the sync to finish sending | |||||
serial_delay(); | |||||
// read the middle of pulses | |||||
_delay_us(SERIAL_DELAY/2); | |||||
uint8_t checksum_computed = 0; | |||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { | |||||
serial_master_buffer[i] = serial_read_byte(); | |||||
sync_send(); | |||||
checksum_computed += serial_master_buffer[i]; | |||||
} | |||||
uint8_t checksum_received = serial_read_byte(); | |||||
sync_send(); | |||||
serial_input(); // end transaction | |||||
if ( checksum_computed != checksum_received ) { | |||||
status |= SLAVE_DATA_CORRUPT; | |||||
} else { | |||||
status &= ~SLAVE_DATA_CORRUPT; | |||||
} | |||||
} | |||||
inline | |||||
bool serial_slave_DATA_CORRUPT(void) { | |||||
return status & SLAVE_DATA_CORRUPT; | |||||
} | |||||
// Copies the serial_slave_buffer to the master and sends the | |||||
// serial_master_buffer to the slave. | |||||
// | |||||
// Returns: | |||||
// 0 => no error | |||||
// 1 => slave did not respond | |||||
int serial_update_buffers(void) { | |||||
// this code is very time dependent, so we need to disable interrupts | |||||
cli(); | |||||
// signal to the slave that we want to start a transaction | |||||
serial_output(); | |||||
serial_low(); | |||||
_delay_us(1); | |||||
// wait for the slaves response | |||||
serial_input(); | |||||
serial_high(); | |||||
_delay_us(SERIAL_DELAY); | |||||
// check if the slave is present | |||||
if (serial_read_pin()) { | |||||
// slave failed to pull the line low, assume not present | |||||
sei(); | |||||
return 1; | |||||
} | |||||
// if the slave is present syncronize with it | |||||
sync_recv(); | |||||
uint8_t checksum_computed = 0; | |||||
// receive data from the slave | |||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { | |||||
serial_slave_buffer[i] = serial_read_byte(); | |||||
sync_recv(); | |||||
checksum_computed += serial_slave_buffer[i]; | |||||
} | |||||
uint8_t checksum_received = serial_read_byte(); | |||||
sync_recv(); | |||||
if (checksum_computed != checksum_received) { | |||||
sei(); | |||||
return 1; | |||||
} | |||||
uint8_t checksum = 0; | |||||
// send data to the slave | |||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { | |||||
serial_write_byte(serial_master_buffer[i]); | |||||
sync_recv(); | |||||
checksum += serial_master_buffer[i]; | |||||
} | |||||
serial_write_byte(checksum); | |||||
sync_recv(); | |||||
// always, release the line when not in use | |||||
serial_output(); | |||||
serial_high(); | |||||
sei(); | |||||
return 0; | |||||
} | |||||
#endif |
@ -0,0 +1,26 @@ | |||||
#ifndef MY_SERIAL_H | |||||
#define MY_SERIAL_H | |||||
#include "config.h" | |||||
#include <stdbool.h> | |||||
/* TODO: some defines for interrupt setup */ | |||||
#define SERIAL_PIN_DDR DDRD | |||||
#define SERIAL_PIN_PORT PORTD | |||||
#define SERIAL_PIN_INPUT PIND | |||||
#define SERIAL_PIN_MASK _BV(PD0) | |||||
#define SERIAL_PIN_INTERRUPT INT0_vect | |||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 | |||||
#define SERIAL_MASTER_BUFFER_LENGTH 1 | |||||
// Buffers for master - slave communication | |||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; | |||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; | |||||
void serial_master_init(void); | |||||
void serial_slave_init(void); | |||||
int serial_update_buffers(void); | |||||
bool serial_slave_data_corrupt(void); | |||||
#endif |
@ -0,0 +1,86 @@ | |||||
#include <avr/io.h> | |||||
#include <avr/wdt.h> | |||||
#include <avr/power.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include <avr/eeprom.h> | |||||
#include "split_util.h" | |||||
#include "matrix.h" | |||||
#include "keyboard.h" | |||||
#include "config.h" | |||||
#include "timer.h" | |||||
#ifdef USE_I2C | |||||
# include "i2c.h" | |||||
#else | |||||
# include "serial.h" | |||||
#endif | |||||
volatile bool isLeftHand = true; | |||||
static void setup_handedness(void) { | |||||
#ifdef EE_HANDS | |||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); | |||||
#else | |||||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c | |||||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) | |||||
isLeftHand = !has_usb(); | |||||
#else | |||||
isLeftHand = has_usb(); | |||||
#endif | |||||
#endif | |||||
} | |||||
static void keyboard_master_setup(void) { | |||||
#ifdef USE_I2C | |||||
i2c_master_init(); | |||||
#ifdef SSD1306OLED | |||||
matrix_master_OLED_init (); | |||||
#endif | |||||
#else | |||||
serial_master_init(); | |||||
#endif | |||||
} | |||||
static void keyboard_slave_setup(void) { | |||||
timer_init(); | |||||
#ifdef USE_I2C | |||||
i2c_slave_init(SLAVE_I2C_ADDRESS); | |||||
#else | |||||
serial_slave_init(); | |||||
#endif | |||||
} | |||||
bool has_usb(void) { | |||||
USBCON |= (1 << OTGPADE); //enables VBUS pad | |||||
_delay_us(5); | |||||
return (USBSTA & (1<<VBUS)); //checks state of VBUS | |||||
} | |||||
void split_keyboard_setup(void) { | |||||
setup_handedness(); | |||||
if (has_usb()) { | |||||
keyboard_master_setup(); | |||||
} else { | |||||
keyboard_slave_setup(); | |||||
} | |||||
sei(); | |||||
} | |||||
void keyboard_slave_loop(void) { | |||||
matrix_init(); | |||||
while (1) { | |||||
matrix_slave_scan(); | |||||
} | |||||
} | |||||
// this code runs before the usb and keyboard is initialized | |||||
void matrix_setup(void) { | |||||
split_keyboard_setup(); | |||||
if (!has_usb()) { | |||||
keyboard_slave_loop(); | |||||
} | |||||
} |
@ -0,0 +1,20 @@ | |||||
#ifndef SPLIT_KEYBOARD_UTIL_H | |||||
#define SPLIT_KEYBOARD_UTIL_H | |||||
#include <stdbool.h> | |||||
#include "eeconfig.h" | |||||
#define SLAVE_I2C_ADDRESS 0x32 | |||||
extern volatile bool isLeftHand; | |||||
// slave version of matix scan, defined in matrix.c | |||||
void matrix_slave_scan(void); | |||||
void split_keyboard_setup(void); | |||||
bool has_usb(void); | |||||
void keyboard_slave_loop(void); | |||||
void matrix_master_OLED_init (void); | |||||
#endif |
@ -1,83 +1,83 @@ | |||||
#include QMK_KEYBOARD_H | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
DYNAMIC_MACRO_RANGE, | |||||
}; | |||||
#include "dynamic_macro.h" | |||||
#define _______ KC_TRNS | |||||
#define KC_REC DYN_REC_START1 | |||||
#define KC_DONE DYN_REC_STOP | |||||
#define KC_PLAY DYN_MACRO_PLAY1 | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
LAYOUT( | |||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, | |||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), | |||||
LAYOUT( | |||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
if (!process_record_dynamic_macro(keycode, record)) { | |||||
return false; | |||||
} | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
DDRC |= (1 << 6); PORTC &= ~(1 << 6); | |||||
} else { | |||||
DDRC &= ~(1 << 6); PORTC &= ~(1 << 6); | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
DDRC |= (1 << 7); PORTC &= ~(1 << 7); | |||||
} else { | |||||
DDRC &= ~(1 << 7); PORTC &= ~(1 << 7); | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
DDRB |= (1 << 5); PORTB &= ~(1 << 5); | |||||
} else { | |||||
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} | |||||
#include QMK_KEYBOARD_H | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
DYNAMIC_MACRO_RANGE, | |||||
}; | |||||
#include "dynamic_macro.h" | |||||
#define _______ KC_TRNS | |||||
#define KC_REC DYN_REC_START1 | |||||
#define KC_DONE DYN_REC_STOP | |||||
#define KC_PLAY DYN_MACRO_PLAY1 | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
LAYOUT( | |||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, | |||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), | |||||
LAYOUT( | |||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______), | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||||
return MACRO_NONE; | |||||
} | |||||
void matrix_init_user(void) { | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
if (!process_record_dynamic_macro(keycode, record)) { | |||||
return false; | |||||
} | |||||
return true; | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||||
DDRC |= (1 << 6); PORTC &= ~(1 << 6); | |||||
} else { | |||||
DDRC &= ~(1 << 6); PORTC &= ~(1 << 6); | |||||
} | |||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||||
DDRC |= (1 << 7); PORTC &= ~(1 << 7); | |||||
} else { | |||||
DDRC &= ~(1 << 7); PORTC &= ~(1 << 7); | |||||
} | |||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||||
DDRB |= (1 << 5); PORTB &= ~(1 << 5); | |||||
} else { | |||||
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); | |||||
} | |||||
if (usb_led & (1 << USB_LED_COMPOSE)) { | |||||
} else { | |||||
} | |||||
if (usb_led & (1 << USB_LED_KANA)) { | |||||
} else { | |||||
} | |||||
} |