@ -0,0 +1,12 @@ | |||
// Copyright 2023 binepad (@binepad) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
#define ENCODER_DEFAULT_POS 0x3 // enable 1:1 resolution | |||
// Default PIO0 cases flickering in this board. Setting to PIO1 resolves this issue. | |||
#define WS2812_PIO_USE_PIO1 | |||
// Timing for SK6812 | |||
#define WS2812_T1H 650 |
@ -0,0 +1,86 @@ | |||
{ | |||
"manufacturer": "binepad", | |||
"keyboard_name": "BNK9", | |||
"maintainer": "binepad", | |||
"board": "GENERIC_RP_RP2040", | |||
"bootloader": "rp2040", | |||
"bootloader_instructions": "Hold down the key at (0x0) in the matrix (the 'knob' / rotary encoder) and plug in the keyboard.", | |||
"diode_direction": "COL2ROW", | |||
"encoder": { | |||
"rotary": [ | |||
{"pin_a": "GP13", "pin_b": "GP14"} | |||
] | |||
}, | |||
"features": { | |||
"bootmagic": true, | |||
"encoder": true, | |||
"extrakey": true, | |||
"mousekey": true, | |||
"nkro": true, | |||
"rgb_matrix": true | |||
}, | |||
"matrix_pins": { | |||
"cols": ["GP1", "GP2", "GP3"], | |||
"rows": ["GP12", "GP4", "GP5", "GP6"] | |||
}, | |||
"processor": "RP2040", | |||
"rgb_matrix": { | |||
"animations": { | |||
"breathing": true, | |||
"cycle_all": true, | |||
"cycle_left_right": true, | |||
"cycle_pinwheel": true, | |||
"cycle_up_down": true, | |||
"jellybean_raindrops": true, | |||
"riverflow": true, | |||
"solid_reactive": true, | |||
"solid_reactive_simple": true, | |||
"solid_splash": true, | |||
"splash": true, | |||
"starlight": true, | |||
"starlight_dual_hue": true, | |||
"starlight_dual_sat": true | |||
}, | |||
"driver": "ws2812", | |||
"layout": [ | |||
{"matrix": [1, 0], "x": 80, "y": 0, "flags": 4}, | |||
{"matrix": [1, 1], "x": 112, "y": 0, "flags": 4}, | |||
{"matrix": [1, 2], "x": 144, "y": 0, "flags": 4}, | |||
{"matrix": [2, 2], "x": 144, "y": 32, "flags": 4}, | |||
{"matrix": [2, 1], "x": 112, "y": 32, "flags": 4}, | |||
{"matrix": [2, 0], "x": 80, "y": 32, "flags": 4}, | |||
{"matrix": [3, 0], "x": 80, "y": 64, "flags": 4}, | |||
{"matrix": [3, 1], "x": 112, "y": 64, "flags": 4}, | |||
{"matrix": [3, 2], "x": 144, "y": 64, "flags": 4} | |||
], | |||
"led_process_limit": 9, | |||
"max_brightness": 180, | |||
"sleep": true | |||
}, | |||
"url": "https://www.binepad.com/product-page/bnk9", | |||
"usb": { | |||
"device_version": "1.0.0", | |||
"pid": "0x4E39", | |||
"vid": "0x4249" | |||
}, | |||
"ws2812": { | |||
"driver": "vendor", | |||
"pin": "GP11" | |||
}, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label": "Knob", "matrix": [0, 0], "x": 0, "y": 0, "w": 3, "h": 3, "encoder": 0}, | |||
{"label": "1", "matrix": [1, 0], "x": 3.25, "y": 0}, | |||
{"label": "2", "matrix": [1, 1], "x": 4.25, "y": 0}, | |||
{"label": "3", "matrix": [1, 2], "x": 5.25, "y": 0}, | |||
{"label": "4", "matrix": [2, 0], "x": 3.25, "y": 1}, | |||
{"label": "5", "matrix": [2, 1], "x": 4.25, "y": 1}, | |||
{"label": "6", "matrix": [2, 2], "x": 5.25, "y": 1}, | |||
{"label": "7", "matrix": [3, 0], "x": 3.25, "y": 2}, | |||
{"label": "8", "matrix": [3, 1], "x": 4.25, "y": 2}, | |||
{"label": "9", "matrix": [3, 2], "x": 5.25, "y": 2} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,28 @@ | |||
// Copyright 2023 Binepad (@binpad) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_MUTE, | |||
KC_P1, KC_P2, KC_P3, | |||
KC_P4, KC_P5, KC_P6, | |||
KC_P7, KC_P8, LT(1, KC_P9) | |||
), | |||
[1] = LAYOUT( | |||
RGB_TOG, | |||
RGB_HUI, RGB_SAI, RGB_SPI, | |||
RGB_HUD, RGB_SAD, RGB_SPD, | |||
RGB_RMOD, RGB_MOD, _______ | |||
) | |||
}; | |||
#if defined(ENCODER_MAP_ENABLE) | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[1] = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) } | |||
}; | |||
#endif |
@ -0,0 +1 @@ | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,28 @@ | |||
// Copyright 2023 Binepad (@binpad) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_MUTE, | |||
KC_P1, KC_P2, KC_P3, | |||
KC_P4, KC_P5, KC_P6, | |||
KC_P7, KC_P8, LT(1, KC_P9) | |||
), | |||
[1] = LAYOUT( | |||
RGB_TOG, | |||
RGB_HUI, RGB_SAI, RGB_SPI, | |||
RGB_HUD, RGB_SAD, RGB_SPD, | |||
RGB_RMOD, RGB_MOD, _______ | |||
) | |||
}; | |||
#if defined(ENCODER_MAP_ENABLE) | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[1] = { ENCODER_CCW_CW(RGB_VAD, RGB_VAI) } | |||
}; | |||
#endif |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,27 @@ | |||
# BINEPAD BNK9 | |||
![BINEPAD BNK9](https://i.imgur.com/FrkVRhhh.jpg) | |||
A 3x3 macropad with a large rotary encoder. | |||
* Keyboard Maintainer: [binepad](https://github.com/binepad) | |||
* Hardware Supported: BINPAD BNK9 | |||
* Hardware Availability: [binepad.com](https://www.binepad.com/product-page/bnk9) | |||
Make example for this keyboard (after setting up your build environment): | |||
make binepad/bnk9:default | |||
Flashing example for this keyboard: | |||
make binepad/bnk9:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader | |||
Enter the bootloader in 3 ways: | |||
* **Bootmagic reset**: Hold down the key at (0x0) in the matrix (the 'knob' / rotary encoder) and plug in the keyboard. | |||
* **Physical reset button**: Briefly press the PCB button located on the back of the PCB. | |||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` *(or* `RESET` *in VIA)* if it is available. |
@ -0,0 +1 @@ | |||
# This file intentionally left blank |