woo it works use lets split code Final working. Uses serial Update licensepull/2378/head
@ -0,0 +1,192 @@ | |||
/* | |||
Copyright 2017 IslandMan93 | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x1257 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER UniKeyboard | |||
#define PRODUCT diverge3 | |||
#define DESCRIPTION Split 72 key keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// SERIAL is the only supported | |||
#define USE_SERIAL | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
#define DIODE_DIRECTION ROW2COL | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
#endif |
@ -0,0 +1,16 @@ | |||
/* Copyright 2017 IslandMan93 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "diverge3.h" |
@ -0,0 +1,51 @@ | |||
/* Copyright 2017 IslandMan93 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef DIVERGE3_H | |||
#define DIVERGE3_H | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
// This a shortcut to help you visually see your layout. | |||
// The second converts the arguments into a two-dimensional array | |||
// Used to create a keymap using only KC_ prefixed keys | |||
#define KC_KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ | |||
L40, L41, L42, L43, L44, LT0, LT1, LT2, RT2, RT1, RT0, R40, R41, R42, R43, R44 \ | |||
) \ | |||
{ \ | |||
{ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_NO }, \ | |||
{ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_NO }, \ | |||
{ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_NO }, \ | |||
{ KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_NO }, \ | |||
{ KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##LT0, KC_##LT1, KC_##LT2 }, \ | |||
{ KC_##R06, KC_##R05, KC_##R04, KC_##R03, KC_##R02, KC_##R01, KC_##R00, KC_NO }, \ | |||
{ KC_##R16, KC_##R15, KC_##R14, KC_##R13, KC_##R12, KC_##R11, KC_##R10, KC_NO }, \ | |||
{ KC_##R26, KC_##R25, KC_##R24, KC_##R23, KC_##R22, KC_##R21, KC_##R20, KC_NO }, \ | |||
{ KC_##R36, KC_##R35, KC_##R34, KC_##R33, KC_##R32, KC_##R31, KC_##R30, KC_NO }, \ | |||
{ KC_##R44, KC_##R43, KC_##R42, KC_##R41, KC_##R40, KC_##RT0, KC_##RT1, KC_##RT2 } \ | |||
} | |||
#endif |
@ -0,0 +1,27 @@ | |||
/* Copyright 2017 IslandMan93 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_USER_H | |||
#define CONFIG_USER_H | |||
#include "config_common.h" | |||
// place overrides here | |||
#define MASTER_RIGHT | |||
#define PERMISSIVE_HOLD | |||
#define TAPPING_TERM 150 | |||
#endif |
@ -0,0 +1,161 @@ | |||
/* Copyright 2017 IslandMan93 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "diverge3.h" | |||
#include "action_layer.h" | |||
#include "eeconfig.h" | |||
//**************** Definitions needed for quad function to work *********************// | |||
enum { | |||
SE_TAP_DANCE = 0 | |||
}; | |||
//Enums used to clearly convey the state of the tap dance | |||
enum { | |||
SINGLE_TAP = 1, | |||
SINGLE_HOLD = 2, | |||
DOUBLE_TAP = 3, | |||
DOUBLE_HOLD = 4, | |||
DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP | |||
// Add more enums here if you want for triple, quadruple, etc. | |||
}; | |||
typedef struct { | |||
bool is_press_action; | |||
int state; | |||
} tap; | |||
int cur_dance (qk_tap_dance_state_t *state) { | |||
if (state->count == 1) { | |||
//If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP | |||
if (state->interrupted || state->pressed==0) return SINGLE_TAP; | |||
else return SINGLE_HOLD; | |||
} | |||
//If count = 2, and it has been interrupted - assume that user is trying to type the letter associated | |||
//with single tap. In example below, that means to send `xx` instead of `Escape`. | |||
else if (state->count == 2) { | |||
if (state->interrupted) return DOUBLE_SINGLE_TAP; | |||
else if (state->pressed) return DOUBLE_HOLD; | |||
else return DOUBLE_TAP; | |||
} | |||
else return 6; //magic number. At some point this method will expand to work for more presses | |||
} | |||
//**************** Definitions needed for quad function to work *********************// | |||
// Backspace Shift TD | |||
//instanalize an instance of 'tap' for the 'x' tap dance. | |||
static tap se_tap_state = { | |||
.is_press_action = true, | |||
.state = 0 | |||
}; | |||
void se_finished (qk_tap_dance_state_t *state, void *user_data) { | |||
se_tap_state.state = cur_dance(state); | |||
switch (se_tap_state.state) { | |||
case SINGLE_TAP: register_code(KC_SPC); break; | |||
case SINGLE_HOLD: register_code(KC_ENT); break; | |||
default: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC); | |||
//Last case is for fast typing. Assuming your key is `f`: | |||
//For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`. | |||
//In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms. | |||
} | |||
} | |||
void se_reset (qk_tap_dance_state_t *state, void *user_data) { | |||
switch (se_tap_state.state) { | |||
case SINGLE_TAP: unregister_code(KC_SPC); break; | |||
case SINGLE_HOLD: unregister_code(KC_ENT); break; | |||
default: unregister_code(KC_SPC); | |||
} | |||
se_tap_state.state = 0; | |||
} | |||
qk_tap_dance_action_t tap_dance_actions[] = { | |||
[SE_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, se_finished, se_reset) | |||
}; | |||
// KEYMAP | |||
extern keymap_config_t keymap_config; | |||
#define _QWERTY 0 | |||
#define _LOWER 1 | |||
enum custom_keycodes { | |||
PAREN_MACRO = SAFE_RANGE, | |||
ARROW_MACRO, | |||
PSELF_MACRO | |||
}; | |||
// Make layer undefined do nothing | |||
#define KC_ KC_TRNS | |||
// Macros | |||
#define KC_PMAC PAREN_MACRO | |||
#define KC_AMAC ARROW_MACRO | |||
// Holds for layer | |||
#define KC_DEL1 LT(_LOWER, KC_DEL) | |||
#define KC_TAB1 LT(_LOWER, KC_TAB) | |||
// Space on tap, enter on hold. | |||
#define KC_SPNT TD(SE_TAP_DANCE) | |||
#define KC_BSHT SFT_T(KC_BSPC) | |||
// Jumps the cursor a word right or left | |||
#define KC_WRDRT LCTL(KC_RIGHT) | |||
#define KC_WRDLT LCTL(KC_LEFT) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = KC_KEYMAP( | |||
//,----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
ESC, 1 , 2 , 3 , 4 , 5 ,MUTE, MPLY, 6 , 7 , 8 , 9 , 0 ,PSCR, | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
GRV, Q , W , E , R , T ,VOLD, VOLU, Y , U , I , O , P ,CAPS, | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
TAB, A , S , D , F , G ,PGDN, PGUP, H , J , K , L ,SCLN,BSLS, | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
LSFT, Z , X , C , V , B ,WRDLT, WRDRT, N , M ,COMM,DOT ,SLSH,QUOT, | |||
//|----+----+----+----+----+----+----+----|||----+----+----+----+----+----+----+----| | |||
LCTL,LGUI, APP,LALT,HOME,SPNT,DEL1,BSHT , ENT ,TAB1,BSHT,END ,DOWN, UP ,LEFT,RIGHT | |||
), | |||
[_LOWER] = KC_KEYMAP( | |||
//,----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, F1 , F2 , F3 , F4 , F5 ,F11 , F12, F6 , F7 , F8 , F9 , , , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
TILD,EXLM, AT ,HASH,DLR ,PERC, , ,CIRC,AMPR,ASTR, , , , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, ,LBRC,LPRN,UNDS,LCBR, , ,RCBR, EQL,RPRN,RBRC,COLN, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , ,PMAC,MINS,AMAC, , , ,PLUS, , , , , | |||
//|----+----+----+----+----+----+----+----|||----+----+----+----+----+----+----+----| | |||
, , , , , , , , , , , , , , , | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
if (record->event.pressed) { | |||
switch(keycode) { | |||
case PAREN_MACRO: | |||
SEND_STRING("()"); | |||
return false; break; | |||
case ARROW_MACRO: | |||
SEND_STRING("->"); | |||
return false; break; | |||
} | |||
} | |||
return true; | |||
}; |
@ -0,0 +1,6 @@ | |||
# The default keymap for diverge3 | |||
Just a keymap that I use for programming. | |||
The focus is to have the thumbs do all the work for spacing/backspacing, shifting, and symbols. | |||
Also there is some duplicated functionality on the left hand for when editing with a mouse. |
@ -0,0 +1 @@ | |||
TAP_DANCE_ENABLE = yes |
@ -0,0 +1,16 @@ | |||
# diverge3 | |||
A split 5x7 keyboard with 3 thumb keys. Made by [Unikeyboard](https://unikeyboard.io). | |||
Keyboard Maintainer: [IslandMan93](https://github.com/islandman93) | |||
Hardware Supported: Pro Micro | |||
Hardware Availability: [Diverge 3](https://unikeyboard.io/product/diverge/) | |||
Make example for this keyboard (after setting up your build environment): | |||
make diverge3:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||
# Reflashing Animus | |||
Reflashing the stock firmware is pretty easy. Just follow the same steps in the [original guide](https://imgur.com/a/8UapN). You will have to manually reset the Pro Micro (by shorting the GND and RST) during the upload step. Then reapply your keymap through Arbites. |
@ -0,0 +1,73 @@ | |||
SRC += ../lets_split/matrix.c \ | |||
../lets_split/serial.c \ | |||
../lets_split/split_util.c | |||
# MCU name | |||
#MCU = at90usb1286 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
CUSTOM_MATRIX = yes |