[Keyboard] move weirdo-f's keyboards into weirdo/ (#15785)

keyboards/geminate60/readme.md → keyboards/weirdo/geminate60/readme.md

@@ -10,7 +10,7 @@ A 60% keyboard based on STM32F303.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make geminate60:default
+    make weirdo/geminate60:default
 
 The RST pin and GND pin on the board can be quickly shortened twice to enter DFU mode, and then the program can be written.
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kelowna/rgb64/readme.md → keyboards/weirdo/kelowna/rgb64/readme.md

@@ -10,7 +10,7 @@ A 60% keyboard based on STM32f303
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kelowna/rgb64:default
+    make weirdo/kelowna/rgb64:default
 
 Use the SWD interface on the board to connect to the STlink (JLink) to directly burn firmware without entering the bootloader.
 

keyboards/ls_60/readme.md → keyboards/weirdo/ls_60/readme.md

@@ -10,7 +10,7 @@ A 60% keyboard based on STM32f303
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ls_60:default
+    make weirdo/ls_60:default
 
 The RST pin and GND pin on the board can be quickly shortened twice to enter DFU mode, and then the program can be written.
 

keyboards/naiping/np64/readme.md → keyboards/weirdo/naiping/np64/readme.md

@@ -10,7 +10,7 @@ A 60% keyboard based on STM32f303
 
 Make example for this keyboard (after setting up your build environment):
 
-    make naiping/np64:default
+    make weirdo/naiping/np64:default
 
 The RST pin and GND pin on the board can be quickly shortened twice to enter DFU mode, and then the program can be written.
 

keyboards/naiping/nphhkb/readme.md → keyboards/weirdo/naiping/nphhkb/readme.md

@@ -10,7 +10,7 @@ A 60% keyboard based on STM32f303
 
 Make example for this keyboard (after setting up your build environment):
 
-    make naiping/nphhkb:default
+    make weirdo/naiping/nphhkb:default
 
 The RST pin and GND pin on the board can be quickly shortened twice to enter DFU mode, and then the program can be written.
 

keyboards/naiping/npminila/readme.md → keyboards/weirdo/naiping/npminila/readme.md

@@ -10,7 +10,7 @@ A 60% keyboard based on STM32f303
 
 Make example for this keyboard (after setting up your build environment):
 
-    make naiping/npminila:default
+    make weirdo/naiping/npminila:default
 
 The RST pin and GND pin on the board can be quickly shortened twice to enter DFU mode, and then the program can be written.
 

keyboards/tiger910/readme.md → keyboards/weirdo/tiger910/readme.md

@@ -10,6 +10,6 @@ A 65% keyboard
 
 Make example for this keyboard (after setting up your build environment):
 
-    make tiger910:default
+    make weirdo/tiger910:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).