From cff9019b4358031915bfbed127884ca069ae9c03 Mon Sep 17 00:00:00 2001
From: paprikman <57448756+paprikman@users.noreply.github.com>
Date: Mon, 13 Sep 2021 12:08:16 +0500
Subject: [PATCH] update readme.md

replace image url with imgur one
---
 keyboards/paprikman/albacore/readme.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/keyboards/paprikman/albacore/readme.md b/keyboards/paprikman/albacore/readme.md
index 9af9ac39adc..6f8c87c86fb 100644
--- a/keyboards/paprikman/albacore/readme.md
+++ b/keyboards/paprikman/albacore/readme.md
@@ -2,7 +2,7 @@
 
 *A small 7-key macropad featuring hotswap and per-key RGB*
 
-![Albacore](https://github.com/paprikman/my_files/blob/master/albacore_macropad.jpg)
+![Albacore](https://i.imgur.com/BTPHnuQ.jpg)
 
 * Keyboard Maintainer: paprikman
 * Hardware Supported: Albacore hotswap pcb
@@ -19,4 +19,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 There are several ways to enter the bootloader:
 * **Using keycode**: Press the `RESET` key (if mapped)
 * **Bootmagic reset**: Hold the left bottom key (default mod key) and plug the usb cable
-* **Physical reset**: In the top right corner of the bottom part of the pcb you will find two pads. Shorten them with tweezers and plug the usb cable, then release. It is also possible to shorten these pads while the macropad is already connected (shorten and hold for a couple of seconds, then release).
\ No newline at end of file
+* **Physical reset**: In the top right corner of the bottom part of the pcb you will find two pads. Shorten them with tweezers and plug the usb cable, then release. It is also possible to shorten these pads while the macropad is already connected (shorten and hold for a couple of seconds, then release).