Merge branch 'develop' into gpio-api-update-keyboards

data/mappings/info_config.hjson

@@ -164,7 +164,6 @@
     "RGBLIGHT_DEFAULT_SAT": {"info_key": "rgblight.default.sat", "value_type": "int"},
     "RGBLIGHT_DEFAULT_VAL": {"info_key": "rgblight.default.val", "value_type": "int"},
     "RGBLIGHT_DEFAULT_SPD": {"info_key": "rgblight.default.speed", "value_type": "int"},
-    "RGBW": {"info_key": "rgblight.rgbw", "value_type": "flag"},
 
     // Secure
     "SECURE_IDLE_TIMEOUT": {"info_key": "secure.idle_timeout", "value_type": "int"},
@@ -215,6 +214,7 @@
     "WS2812_DI_PIN": {"info_key": "ws2812.pin"},
     "WS2812_I2C_ADDRESS": {"info_key": "ws2812.i2c_address", "value_type": "hex"},
     "WS2812_I2C_TIMEOUT": {"info_key": "ws2812.i2c_timeout", "value_type": "int"},
+    "WS2812_RGBW": {"info_key": "ws2812.rgbw", "value_type": "flag"},
 
     "LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"},
 
@@ -229,6 +229,7 @@
     "PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
     "QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int", "deprecated": true},
     "RGB_DI_PIN": {"info_key": "rgblight.pin", "invalid": true, "replace_with": "WS2812_DI_PIN or APA102_DI_PIN"},
+    "RGBW": {"info_key": "rgblight.rgbw", "invalid": true, "replace_with": "WS2812_RGBW"},
     "RGB_DISABLE_WHEN_USB_SUSPENDED": {"info_key": "_invalid.rgb_matrix_sleep", "invalid": true, "replace_with": "RGB_MATRIX_SLEEP"},
     "RGBLIGHT_ANIMATIONS": {"info_key": "_invalid.rgblight.animations.all", "value_type": "flag", "invalid": true},
     "TAPPING_FORCE_HOLD": {"info_key": "tapping.force_hold", "value_type": "flag", "deprecated": true},

data/mappings/info_rules.hjson

@@ -11,6 +11,7 @@
     // invalid: Default `false`. Set to `true` to generate errors when a value exists
     // replace_with: use with a key marked deprecated or invalid to designate a replacement
 
+    "AUDIO_DRIVER": {"info_key": "audio.driver"},
     "BACKLIGHT_DRIVER": {"info_key": "backlight.driver"},
     "BLUETOOTH_DRIVER": {"info_key": "bluetooth.driver"},
     "BOARD": {"info_key": "board"},
@@ -23,6 +24,7 @@
     "ENCODER_ENABLE": {"info_key": "encoder.enabled", "value_type": "bool"},
     "ENCODER_DRIVER": {"info_key": "encoder.driver"},
     "FIRMWARE_FORMAT": {"info_key": "build.firmware_format"},
+    "HAPTIC_DRIVER": {"info_key": "haptic.driver"},
     "KEYBOARD_SHARED_EP": {"info_key": "usb.shared_endpoint.keyboard", "value_type": "bool"},
     "LAYOUTS": {"info_key": "community_layouts", "value_type": "list"},
     "LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"},
@@ -43,7 +45,7 @@
     "SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
     "STENO_ENABLE": {"info_key": "stenography.enabled", "value_type": "bool"},
     "STENO_PROTOCOL": {"info_key": "stenography.protocol"},
-    "WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"},
+    "USB_WAIT_FOR_ENUMERATION": {"info_key": "usb.wait_for_enumeration", "value_type": "bool"},
     "WEAR_LEVELING_DRIVER": {"info_key": "eeprom.wear_leveling.driver"},
     "WS2812_DRIVER": {"info_key": "ws2812.driver"},
 

data/schemas/keyboard.jsonschema

@@ -133,6 +133,10 @@
                         "clicky": {"type": "boolean"}
                     }
                 },
+                "driver": {
+                    "type": "string",
+                    "enum": ["dac_additive", "dac_basic", "pwm_software", "pwm_hardware"]
+                },
                 "macro_beep": {"type": "boolean"},
                 "pins": {"$ref": "qmk.definitions.v1#/mcu_pin_array"},
                 "power_control": {
@@ -387,6 +391,15 @@
                 }
             }
         },
+        "haptic": {
+            "type": "object",
+            "properties": {
+                "driver": {
+                    "type": "string",
+                    "enum": ["drv2605l", "solenoid"]
+                }
+            }
+        },
         "leader_key": {
             "type": "object",
             "properties": {
@@ -648,7 +661,10 @@
                     "$ref": "qmk.definitions.v1#/mcu_pin",
                     "$comment": "Deprecated: use ws2812.pin instead"
                 },
-                "rgbw": {"type": "boolean"},
+                "rgbw": {
+                    "type": "boolean",
+                    "$comment": "Deprecated: use ws2812.rgbw instead"
+                },
                 "saturation_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
                 "sleep": {"type": "boolean"},
                 "split": {"type": "boolean"},
@@ -885,7 +901,7 @@
                     }
                 },
                 "suspend_wakeup_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"},
-                "wait_for": {"type": "boolean"}
+                "wait_for_enumeration": {"type": "boolean"}
             }
         },
         "qmk": {
@@ -924,6 +940,7 @@
                     "enum": ["bitbang", "custom", "i2c", "pwm", "spi", "vendor"]
                 },
                 "pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
+                "rgbw": {"type": "boolean"},
                 "i2c_address": {"$ref": "qmk.definitions.v1#/hex_number_2d"},
                 "i2c_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
             }

docs/config_options.md

@@ -237,7 +237,7 @@ If you define these options you will enable the associated feature, which may in
   * units to step when in/decreasing saturation
 * `#define RGBLIGHT_VAL_STEP 12`
   * units to step when in/decreasing value (brightness)
-* `#define RGBW`
+* `#define WS2812_RGBW`
   * Enables RGBW LED support
 
 ## Mouse Key Options
@@ -446,7 +446,7 @@ Use these to enable or disable building certain features. The more you have enab
   * Allows replacing the standard matrix scanning routine with a custom one.
 * `DEBOUNCE_TYPE`
   * Allows replacing the standard key debouncing routine with an alternative or custom one.
-* `WAIT_FOR_USB`
+* `USB_WAIT_FOR_ENUMERATION`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.

docs/feature_rgblight.md

@@ -6,7 +6,7 @@ QMK has the ability to control RGB LEDs attached to your keyboard. This is commo
 
 Some keyboards come with RGB LEDs preinstalled. Others must have them installed after the fact. See the [Hardware Modification](#hardware-modification) section for information on adding RGB lighting to your keyboard.
 
-Currently QMK supports the following addressable LEDs (however, the white LED in RGBW variants is not supported):
+Currently QMK supports the following addressable LEDs:
 
  * WS2811, WS2812, WS2812B, WS2812C, etc.
  * SK6812, SK6812MINI, SK6805

docs/ja/config_options.md

@@ -378,7 +378,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
   * 標準マトリックス走査ルーチンを独自のものに置き換えることができます。
 * `DEBOUNCE_TYPE`
   * 標準キーデバウンスルーチンを代替または独自のものに置き換えることができます。
-* `WAIT_FOR_USB`
+* `USB_WAIT_FOR_ENUMERATION`
   * キーボードが起動する前に、USB 接続が確立されるのをキーボードに待機させます
 * `NO_USB_STARTUP_CHECK`
   * キーボードの起動後の usb サスペンドチェックを無効にします。通常、キーボードはタスクが実行される前にホストがウェイク アップするのを待ちます。分割キーボードは半分はウェイクアップコールを取得できませんが、マスタにコマンドを送信する必要があるため、役に立ちます。

docs/pr_checklist.md

@@ -148,6 +148,13 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
   - For instance, only `wilba_tech` boards shall include `keyboards/wilba_tech/wt_main.c` and  `keyboards/wilba_tech/wt_rgb_backlight.c`. But including `drivers/sensors/pmw3360.c` is absolutely fine for any and all boards that require it.
   - Code that needs to be used by multiple boards is a candidate for core code changes, and should be separated out.
 
+Wireless-capable boards:
+- Given license abuse from vendors, QMK does not accept any vendor PRs for wireless- or Bluetooth-capable keyboards without wireless and/or Bluetooth code
+    - Historically, vendors have done this in bad faith in order to attain downstream VIA compatibility with no intention of releasing wireless sources
+    - QMK's license, the GPL2+, requires full source disclosure for any distributed binary -- including full sources for any keyboard shipped by vendors containing QMK and/or firmware-side VIA code
+    - If a vendor's wireless-capable keyboard PR submission is lacking wireless capability, then the PR will be left on-hold and unmergeable until wireless bindings are provided
+    - If a vendor's wireless-capable keyboard is merged into QMK before it's known that the board is wireless, then all existing and future PRs from the same vendor will be put on hold until wireless bindings for the offending keyboard are provided
+
 Also, specific to ChibiOS:
 - **strong** preference to using existing ChibiOS board definitions.
     - a lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family

docs/reference_info_json.md

@@ -118,6 +118,8 @@ Configures the [Audio](feature_audio.md) feature.
         * `clicky`
             * The default audio clicky enabled state.
             * Default: `true`
+    * `driver`
+        * The driver to use. Must be one of `dac_additive`, `dac_basic`, `pwm_software`, `pwm_hardware`.
     * `macro_beep`
         * Play a short beep for `\a` (ASCII `BEL`) characters in Send String macros.
         * Default: `false`
@@ -586,9 +588,6 @@ Configures the [RGB Lighting](feature_rgblight.md) feature.
     * `max_brightness`
         * The maximum value which the HSV "V" component is scaled to, from 0 to 255.
         * Default: `255`
-    * `rgbw`
-        * Enable RGBW LEDs.
-        * Default: `false`
     * `saturation_steps`
         * The number of saturation adjustment steps.
         * Default: `17`
@@ -833,7 +832,7 @@ Configures the [Stenography](feature_stenography.md) feature.
     * `suspend_wakeup_delay`
         * The amount of time to wait after sending a wakeup packet, in milliseconds.
         * Default: `0` (disabled)
-    * `wait_for`
+    * `wait_for_enumeration`
         * Force the keyboard to wait for USB enumeration before starting up.
         * Default: `false`
 
@@ -853,3 +852,6 @@ Configures the [WS2812](ws2812_driver.md) driver.
     * `i2c_timeout`
         * The I²C timeout in milliseconds (`i2c` driver only).
         * Default: `100` (100 ms)
+    * `rgbw`
+        * Enable RGBW LEDs.
+        * Default: `false`

docs/ws2812_driver.md

@@ -33,6 +33,7 @@ Add the following to your `config.h`:
 |`WS2812_T0H`       |`350`                  |The length of a "0" bit's high phase in nanoseconds                                             |
 |`WS2812_TRST_US`   |`280`                  |The length of the reset phase in microseconds                                                   |
 |`WS2812_BYTE_ORDER`|`WS2812_BYTE_ORDER_GRB`|The byte order of the RGB data                                                                  |
+|`WS2812_RGBW`      |*Not defined*          |Enables RGBW support (except `i2c` driver)                                                      |
 
 ### Timing Adjustment :id=timing-adjustment
 
@@ -58,6 +59,27 @@ Where the byte order may be one of:
 |`RGB`     |WS2812B-2020                |
 |`BGR`     |TM1812                      |
 
+### RGBW Support :id=rgbw-support
+
+Rendering the color white with RGB LEDs is typically inconsistent due to inherent variations between each individual LED die. However, some WS2812 variants (such as SK6812RGBW) also possess a white LED along with the red, green, and blue channels, which allows for a more accurate white to be displayed.
+
+QMK can automatically convert the RGB data to be sent to the LEDs to mix in the white channel:
+
+```
+w = min(r, g, b)
+r -= w
+g -= w
+b -= w
+```
+
+Thus, an RGB triplet of `255,255,255` will simply turn on the white LED fully (`0,0,0,255`).
+
+To enable RGBW conversion, add the following to your `config.h`:
+
+```c
+#define WS2812_RGBW
+```
+
 ## Driver Configuration :id=driver-configuration
 
 Driver selection can be configured in `rules.mk` as `WS2812_DRIVER`, or in `info.json` as `ws2812.driver`. Valid values are `bitbang` (default), `i2c`, `spi`, `pwm`, `vendor`, or `custom`. See below for information on individual drivers.

keyboards/adafruit/macropad/keyboard.json

@@ -19,6 +19,7 @@
         "oled": true
     },
     "audio": {
+        "driver": "pwm_hardware",
         "power_control": {
             "pin": "GP14"
         }

keyboards/adafruit/macropad/rules.mk

@@ -1,2 +1 @@
-AUDIO_DRIVER = pwm_hardware
 OLED_TRANSPORT = spi

keyboards/ai03/lunar_ii/keyboard.json

@@ -22,6 +22,9 @@
             "resync": true
         }
     },
+    "haptic": {
+        "driver": "solenoid"
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "diode_direction": "COL2ROW",

keyboards/ai03/lunar_ii/rules.mk

@@ -1 +0,0 @@
-HAPTIC_DRIVER = solenoid

keyboards/arrowmechanics/wings/keyboard.json

@@ -17,6 +17,9 @@
         "mousekey": true,
         "rgb_matrix": true
     },
+    "audio": {
+        "driver": "pwm_hardware"
+    },
     "matrix_pins": {
         "cols": ["GP8", "GP9", "GP10", "GP11", "GP12", "GP13", "GP14", "GP15", "GP16"],
         "rows": ["GP22", "GP21", "GP20", "GP19", "GP18", "GP17"]

keyboards/arrowmechanics/wings/rules.mk

@@ -1,2 +1 @@
 SERIAL_DRIVER = vendor
-AUDIO_DRIVER = pwm_hardware

keyboards/bastardkb/charybdis/3x5/blackpill/info.json

@@ -1,7 +1,17 @@
 {
     "keyboard_name": "Charybdis Nano (3x5) Blackpill",
     "usb": {
-        "device_version": "1.0.0"
+        "device_version": "1.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
     },
     "eeprom": {
         "driver": "spi"
@@ -24,7 +34,5 @@
         "rows": ["A2", "B8", "A8", "B9"]
     },
     "diode_direction": "ROW2COL",
-    "processor": "STM32F411",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F411"
+    "development_board": "blackpill_f411"
 }

keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk

@@ -1,22 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
-
 SERIAL_DRIVER = usart

keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json

@@ -3,6 +3,16 @@
     "usb": {
         "device_version": "1.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
+    "build": {
+        "lto": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/charybdis/3x5/v1/elitec/rules.mk

@@ -1,23 +1,4 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-
-# Enable link-time optimization by default.  The Charybdis packs a lot of
-# features (RGB, Via, trackball) in a small atmega32u4 package.
-LTO_ENABLE = yes

keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json

@@ -3,6 +3,16 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
+    "build": {
+        "lto": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/charybdis/3x5/v2/elitec/rules.mk

@@ -1,23 +1,4 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-
-# Enable link-time optimization by default.  The Charybdis packs a lot of
-# features (RGB, Via, trackball) in a small atmega32u4 package.
-LTO_ENABLE = yes

keyboards/bastardkb/charybdis/3x5/v2/splinky_2/info.json

@@ -3,6 +3,13 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/charybdis/3x5/v2/splinky_2/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/charybdis/3x5/v2/splinky_3/info.json

@@ -3,6 +3,13 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/charybdis/3x5/v2/splinky_3/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json

@@ -1,7 +1,17 @@
 {
     "keyboard_name": "Charybdis Nano (3x5) STeMCell",
     "usb": {
-        "device_version": "2.0.0"
+        "device_version": "2.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
     },
     "rgb_matrix": {
         "driver": "ws2812"

keyboards/bastardkb/charybdis/3x5/v2/stemcell/rules.mk

@@ -1,22 +1,6 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/charybdis/3x6/blackpill/info.json

@@ -1,7 +1,17 @@
 {
     "keyboard_name": "Charybdis Mini (3x6) Blackpill",
     "usb": {
-        "device_version": "1.0.0"
+        "device_version": "1.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
     },
     "eeprom": {
         "driver": "spi"
@@ -24,7 +34,5 @@
         "rows": ["A2", "B8", "A8", "B9"]
     },
     "diode_direction": "ROW2COL",
-    "processor": "STM32F411",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F411"
+    "development_board": "blackpill_f411"
 }

keyboards/bastardkb/charybdis/3x6/blackpill/rules.mk

@@ -1,22 +1,6 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/charybdis/3x6/v1/elitec/info.json

@@ -3,6 +3,16 @@
     "usb": {
         "device_version": "1.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
+    "build": {
+        "lto": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/charybdis/3x6/v1/elitec/rules.mk

@@ -1,23 +1,4 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-
-# Enable link-time optimization by default.  The Charybdis packs a lot of
-# features (RGB, Via, trackball) in a small atmega32u4 package.
-LTO_ENABLE = yes

keyboards/bastardkb/charybdis/3x6/v2/elitec/info.json

@@ -3,6 +3,16 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
+    "build": {
+        "lto": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/charybdis/3x6/v2/elitec/rules.mk

@@ -1,23 +1,4 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-
-# Enable link-time optimization by default.  The Charybdis packs a lot of
-# features (RGB, Via, trackball) in a small atmega32u4 package.
-LTO_ENABLE = yes

keyboards/bastardkb/charybdis/3x6/v2/splinky_2/info.json

@@ -3,6 +3,13 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/charybdis/3x6/v2/splinky_2/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/info.json

@@ -3,6 +3,13 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/charybdis/3x6/v2/stemcell/info.json

@@ -1,7 +1,17 @@
 {
     "keyboard_name": "Charybdis Mini (3x6) STeMCell",
     "usb": {
-        "device_version": "2.0.0"
+        "device_version": "2.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
     },
     "rgb_matrix": {
         "driver": "ws2812"

keyboards/bastardkb/charybdis/3x6/v2/stemcell/rules.mk

@@ -1,22 +1,6 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/charybdis/4x6/blackpill/info.json

@@ -1,7 +1,17 @@
 {
     "keyboard_name": "Charybdis (4x6) Blackpill",
     "usb": {
-        "device_version": "1.0.0"
+        "device_version": "1.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
     },
     "eeprom": {
         "driver": "spi"
@@ -24,7 +34,5 @@
         "rows": ["B15", "A2", "B8", "A8", "B9"]
     },
     "diode_direction": "ROW2COL",
-    "processor": "STM32F411",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F411"
+    "development_board": "blackpill_f411"
 }

keyboards/bastardkb/charybdis/4x6/blackpill/rules.mk

@@ -1,22 +1,6 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported.
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/charybdis/4x6/v1/elitec/info.json

@@ -3,6 +3,16 @@
     "usb": {
         "device_version": "1.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
+    "build": {
+        "lto": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/charybdis/4x6/v1/elitec/rules.mk

@@ -1,23 +1,4 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported.
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-
-# Enable link-time optimization by default.  The Charybdis packs a lot of
-# features (RGB, Via, trackball) in a small atmega32u4 package.
-LTO_ENABLE = yes

keyboards/bastardkb/charybdis/4x6/v2/elitec/info.json

@@ -3,6 +3,16 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
+    "build": {
+        "lto": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/charybdis/4x6/v2/elitec/rules.mk

@@ -1,23 +1,4 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported.
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-
-# Enable link-time optimization by default.  The Charybdis packs a lot of
-# features (RGB, Via, trackball) in a small atmega32u4 package.
-LTO_ENABLE = yes

keyboards/bastardkb/charybdis/4x6/v2/splinky_2/info.json

@@ -3,6 +3,13 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/charybdis/4x6/v2/splinky_2/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/info.json

@@ -3,6 +3,13 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/charybdis/4x6/v2/stemcell/info.json

@@ -1,7 +1,17 @@
 {
     "keyboard_name": "Charybdis (4x6) STeMCell",
     "usb": {
-        "device_version": "2.0.0"
+        "device_version": "2.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true,
+        "pointing_device": true
     },
     "rgb_matrix": {
         "driver": "ws2812"

keyboards/bastardkb/charybdis/4x6/v2/stemcell/rules.mk

@@ -1,22 +1,6 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
-POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/dilemma/3x5_2/assembled/info.json

@@ -1,5 +1,11 @@
 {
     "keyboard_name": "Dilemma (3x5+2) Assembled",
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "pointing_device": true
+    },
     "matrix_pins": {
         "cols": ["GP8", "GP9", "GP7", "GP6", "GP27"],
         "rows": ["GP4", "GP5", "GP28", "GP26"]

keyboards/bastardkb/dilemma/3x5_2/assembled/rules.mk

@@ -1,22 +1,7 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
 RGB_MATRIX_SUPPORTED = no   # RGB matrix is supported and enabled by default
 RGBLIGHT_SUPPORTED = no     # RGB underglow is supported, but not enabled by default
-RGB_MATRIX_ENABLE = no      # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor
 
-POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = cirque_pinnacle_spi # Assembled version uses SPI.

keyboards/bastardkb/dilemma/3x5_2/splinky/info.json

@@ -1,5 +1,11 @@
 {
     "keyboard_name": "Dilemma (3x5+2) Splinky",
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "pointing_device": true
+    },
     "matrix_pins": {
         "cols": ["GP8", "GP9", "GP7", "GP6", "GP27"],
         "rows": ["GP4", "GP5", "GP28", "GP26"]

keyboards/bastardkb/dilemma/3x5_2/splinky/rules.mk

@@ -1,22 +1,7 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
 RGB_MATRIX_SUPPORTED = no   # RGB matrix is supported and enabled by default
 RGBLIGHT_SUPPORTED = no     # RGB underglow is supported, but not enabled by default
-RGB_MATRIX_ENABLE = no      # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor
 
-POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c # DIY version uses I2C.

keyboards/bastardkb/dilemma/3x5_3/info.json

@@ -38,6 +38,7 @@
         "mousekey": true,
         "nkro": true,
         "rgb_matrix": true,
+        "pointing_device": true,
         "caps_word": true,
         "tri_layer": true
     },

keyboards/bastardkb/dilemma/3x5_3/rules.mk

@@ -1,4 +1,3 @@
 SERIAL_DRIVER = vendor
 
-POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = cirque_pinnacle_spi

keyboards/bastardkb/dilemma/4x6_4/info.json

@@ -38,6 +38,7 @@
         "mousekey": true,
         "nkro": true,
         "rgb_matrix": true,
+        "pointing_device": true,
         "caps_word": true,
         "tri_layer": true
     },

keyboards/bastardkb/dilemma/4x6_4/rules.mk

@@ -1,4 +1,3 @@
 SERIAL_DRIVER = vendor
 
-POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = cirque_pinnacle_spi

keyboards/bastardkb/scylla/blackpill/info.json

@@ -1,7 +1,16 @@
 {
     "keyboard_name": "Scylla Blackpill",
     "usb": {
-        "device_version": "1.0.0"
+        "device_version": "1.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
     },
     "eeprom": {
         "driver": "spi"
@@ -24,7 +33,5 @@
         "rows": ["B15", "A2", "B8", "A8", "B9"]
     },
     "diode_direction": "ROW2COL",
-    "processor": "STM32F411",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F411"
+    "development_board": "blackpill_f411"
 }

keyboards/bastardkb/scylla/blackpill/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/scylla/v1/elitec/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "1.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "ws2812": {
         "pin": "D2"
     },

keyboards/bastardkb/scylla/v1/elitec/rules.mk

@@ -1,15 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)

keyboards/bastardkb/scylla/v2/elitec/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/scylla/v2/elitec/rules.mk

@@ -1,15 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)

keyboards/bastardkb/scylla/v2/splinky_2/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/scylla/v2/splinky_2/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/scylla/v2/splinky_3/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/scylla/v2/splinky_3/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/scylla/v2/stemcell/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/scylla/v2/stemcell/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/skeletyl/blackpill/info.json

@@ -1,7 +1,16 @@
 {
     "keyboard_name": "Skeletyl Blackpill",
     "usb": {
-        "device_version": "1.0.0"
+        "device_version": "1.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
     },
     "eeprom": {
         "driver": "spi"
@@ -24,7 +33,5 @@
         "rows": ["A2", "B8", "A8", "B9"]
     },
     "diode_direction": "ROW2COL",
-    "processor": "STM32F411",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F411"
+    "development_board": "blackpill_f411"
 }

keyboards/bastardkb/skeletyl/blackpill/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/skeletyl/v1/elitec/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "1.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "ws2812": {
         "pin": "D2"
     },

keyboards/bastardkb/skeletyl/v1/elitec/rules.mk

@@ -1,15 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)

keyboards/bastardkb/skeletyl/v2/elitec/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/skeletyl/v2/elitec/rules.mk

@@ -1,15 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)

keyboards/bastardkb/skeletyl/v2/splinky_2/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/skeletyl/v2/splinky_2/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/skeletyl/v2/splinky_3/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/skeletyl/v2/splinky_3/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/skeletyl/v2/stemcell/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/skeletyl/v2/stemcell/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/tbkmini/blackpill/info.json

@@ -1,7 +1,16 @@
 {
     "keyboard_name": "TBK Mini Blackpill",
     "usb": {
-        "device_version": "1.0.0"
+        "device_version": "1.0.0",
+        "shared_endpoint": {
+            "keyboard": true
+        }
+    },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
     },
     "eeprom": {
         "driver": "spi"
@@ -24,7 +33,5 @@
         "rows": ["A2", "B8", "A8", "B9"]
     },
     "diode_direction": "ROW2COL",
-    "processor": "STM32F411",
-    "bootloader": "stm32-dfu",
-    "board": "BLACKPILL_STM32_F411"
+    "development_board": "blackpill_f411"
 }

keyboards/bastardkb/tbkmini/blackpill/rules.mk

@@ -1,20 +1,5 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
-KEYBOARD_SHARED_EP = yes
 
 SERIAL_DRIVER = usart

keyboards/bastardkb/tbkmini/v1/elitec/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "1.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "ws2812": {
         "pin": "D2"
     },

keyboards/bastardkb/tbkmini/v1/elitec/rules.mk

@@ -1,15 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)

keyboards/bastardkb/tbkmini/v2/elitec/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "ws2812": {
         "pin": "D3"
     },

keyboards/bastardkb/tbkmini/v2/elitec/rules.mk

@@ -1,15 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)

keyboards/bastardkb/tbkmini/v2/splinky_2/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/tbkmini/v2/splinky_2/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/tbkmini/v2/splinky_3/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/tbkmini/v2/splinky_3/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = vendor

keyboards/bastardkb/tbkmini/v2/stemcell/info.json

@@ -3,6 +3,12 @@
     "usb": {
         "device_version": "2.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
     "rgb_matrix": {
         "driver": "ws2812"
     },

keyboards/bastardkb/tbkmini/v2/stemcell/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
 AUDIO_SUPPORTED = no        # Audio is not supported
-RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 
 SERIAL_DRIVER = usart

keyboards/boardsource/equals/48/keyboard.json

@@ -10,6 +10,9 @@
         "cols": ["GP0", "GP1", "GP2", "GP3", "GP4", "GP5", "GP6", "GP7", "GP8", "GP9", "GP10", "GP11"],
         "rows": ["GP12", "GP13", "GP16", "GP17"]
     },
+    "audio": {
+        "driver": "pwm_hardware"
+    },
     "ws2812": {
         "driver": "vendor",
         "pin": "GP21"

keyboards/boardsource/equals/48/rules.mk

@@ -1,2 +1 @@
-AUDIO_DRIVER = pwm_hardware
 QUANTUM_PAINTER_DRIVERS += st7735_spi

keyboards/boardsource/equals/60/keyboard.json

@@ -10,6 +10,9 @@
         "cols": ["GP0", "GP1", "GP2", "GP3", "GP4", "GP5", "GP6", "GP7", "GP8", "GP9", "GP10", "GP11"],
         "rows": ["GP12", "GP13", "GP16", "GP17", "GP18"]
     },
+    "audio": {
+        "driver": "pwm_hardware"
+    },
     "ws2812": {
         "driver": "vendor",
         "pin": "GP21"

keyboards/boardsource/equals/60/rules.mk

@@ -1,2 +1 @@
-AUDIO_DRIVER = pwm_hardware
 QUANTUM_PAINTER_DRIVERS += st7735_spi

keyboards/boardsource/unicorne/keyboard.json

@@ -32,6 +32,9 @@
         "pid": "0x7563",
         "vid": "0x4273"
     },
+    "audio": {
+        "driver": "pwm_hardware"
+    },
     "ws2812": {
         "driver": "vendor",
         "pin": "GP29"