@ -0,0 +1,134 @@ | |||||
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = alps64 | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# project specific files | |||||
SRC = keymap_common.c \ | |||||
matrix.c \ | |||||
led.c | |||||
ifdef KEYMAP | |||||
SRC := keymap_$(KEYMAP).c $(SRC) | |||||
else | |||||
SRC := keymap_plain.c $(SRC) | |||||
endif | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
MCU = atmega32u2 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||||
# Optimize size but this may cause error "relocation truncated to fit" | |||||
#EXTRALDFLAGS = -Wl,--relax | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
@ -0,0 +1,70 @@ | |||||
/* | |||||
Copyright 2015 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6464 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER geekhack | |||||
#define PRODUCT Alps64 | |||||
#define DESCRIPTION t.m.k. keyboard firmware for Alps64 | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 8 | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
@ -0,0 +1,30 @@ | |||||
/* | |||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "keymap_common.h" | |||||
/* translates key to keycode */ | |||||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) | |||||
{ | |||||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||||
} | |||||
/* translates Fn keycode to action */ | |||||
action_t keymap_fn_to_action(uint8_t keycode) | |||||
{ | |||||
return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; | |||||
} |
@ -0,0 +1,70 @@ | |||||
/* | |||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef KEYMAP_COMMON_H | |||||
#define KEYMAP_COMMON_H | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/pgmspace.h> | |||||
#include "keycode.h" | |||||
#include "action.h" | |||||
#include "action_macro.h" | |||||
#include "report.h" | |||||
#include "host.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "keymap.h" | |||||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; | |||||
extern const uint16_t fn_actions[]; | |||||
/* Alps64 keymap definition macro */ | |||||
#define KEYMAP( \ | |||||
K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ | |||||
K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ | |||||
K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ | |||||
K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ | |||||
K30, K40, K50, K60, K70, K00, K10, K20 \ | |||||
) { \ | |||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ | |||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ | |||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ | |||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ | |||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ | |||||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ | |||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ | |||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \ | |||||
} | |||||
/* AEK US */ | |||||
#define KEYMAP_AEK( \ | |||||
K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \ | |||||
K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ | |||||
K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ | |||||
K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \ | |||||
K30, K40, K50, K60, K00, K10, K20 \ | |||||
) KEYMAP( \ | |||||
K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, NO, K27, \ | |||||
K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ | |||||
K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ | |||||
K31, NO, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, NO, \ | |||||
K30, K40, K50, K60, NO, K00, K10, K20 \ | |||||
) | |||||
#endif |
@ -0,0 +1,151 @@ | |||||
#include "keymap_common.h" | |||||
/* | |||||
* Hasu | |||||
*/ | |||||
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Default Layer | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|FN1 | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | Z| X| C| V| B| N| M| ,| .|Fn2|Shift | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
[0] = KEYMAP_AEK( \ | |||||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | |||||
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN1, \ | |||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT, \ | |||||
LCTL,LGUI,LALT, FN4, RALT,FN5, RCTL), | |||||
/* HHKB mode[HHKB Fn] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Del | | |||||
* |-----------------------------------------------------------| | |||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | | +| -|End|PgD|Dow|Shift | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
[1] = KEYMAP_AEK( \ | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, BSPC, \ | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS, \ | |||||
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT, \ | |||||
LCTL,LGUI,LALT, TRNS, RALT,RGUI,RCTL), | |||||
/* Vi mode[Slash] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Del | | |||||
* |-----------------------------------------------------------| | |||||
* |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl | | |||||
* `-----------------------------------------------------------' | |||||
*/ | |||||
[2] = KEYMAP_AEK( \ | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ | |||||
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT, \ | |||||
LCTL,LGUI,LALT, SPC, RALT,RGUI,RCTL), | |||||
/* Mouse mode(IJKL)[Semicolon] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl | | |||||
* `-----------------------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel | |||||
*/ | |||||
[3] = KEYMAP_AEK( \ | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \ | |||||
LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT, \ | |||||
LCTL,LGUI,LALT, BTN1, TRNS,TRNS,TRNS), | |||||
/* Layer 4: Mouse mode(IJKL)[Space] | |||||
* ,-----------------------------------------------------------. | |||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| | |||||
* |-----------------------------------------------------------| | |||||
* |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| | |||||
* |-----------------------------------------------------------| | |||||
* |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | | |||||
* |-----------------------------------------------------------| | |||||
* |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | | |||||
* |-----------------------------------------------------------| | |||||
* |Ctrl |Gui |Alt | Space |Alt |Fn5 |Ctrl | | |||||
* `-----------------------------------------------------------' | |||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel | |||||
*/ | |||||
[4] = KEYMAP_AEK( \ | |||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ | |||||
FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \ | |||||
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ | |||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT, \ | |||||
LCTL,LGUI,LALT, TRNS, TRNS,TRNS,TRNS), | |||||
}; | |||||
/* id for user defined function/macro */ | |||||
enum function_id { | |||||
NONE, | |||||
}; | |||||
enum macro_id { | |||||
ALT_TAB, | |||||
}; | |||||
/* | |||||
* Fn action definition | |||||
*/ | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
[0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used) | |||||
[1] = ACTION_LAYER_TAP_KEY(1, KC_ENTER), // HHKB layer | |||||
[2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* | |||||
[3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* | |||||
[4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space | |||||
[5] = ACTION_LAYER_MOMENTARY(3), // Mousekey layer(IJKL) | |||||
[6] = ACTION_LAYER_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter | |||||
[7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift | |||||
[8] = ACTION_MACRO(ALT_TAB), // Application switching | |||||
[9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT), | |||||
[10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT), | |||||
}; | |||||
/* | |||||
* Macro definition | |||||
*/ | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||||
{ | |||||
switch (id) { | |||||
case ALT_TAB: | |||||
return (record->event.pressed ? | |||||
MACRO( D(LALT), D(TAB), END ) : | |||||
MACRO( U(TAB), END )); | |||||
} | |||||
return MACRO_NONE; | |||||
} |
@ -0,0 +1,12 @@ | |||||
#include "keymap_common.h" | |||||
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* 0: qwerty */ | |||||
KEYMAP_AEK( \ | |||||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ | |||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ | |||||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ | |||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, \ | |||||
LCTL,LGUI,LALT, SPC, RALT,RGUI,RCTL), | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = {}; |
@ -0,0 +1,34 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include "stdint.h" | |||||
#include "led.h" | |||||
void led_set(uint8_t usb_led) | |||||
{ | |||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||||
// output high | |||||
DDRC |= (1<<5); | |||||
PORTC |= (1<<5); | |||||
} else { | |||||
// Hi-Z | |||||
DDRC &= ~(1<<5); | |||||
PORTC &= ~(1<<5); | |||||
} | |||||
} |
@ -0,0 +1,190 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include <util/delay.h> | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "matrix.h" | |||||
#ifndef DEBOUNCE | |||||
# define DEBOUNCE 5 | |||||
#endif | |||||
static uint8_t debouncing = DEBOUNCE; | |||||
/* matrix state(1:on, 0:off) */ | |||||
static matrix_row_t matrix[MATRIX_ROWS]; | |||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||||
static matrix_row_t read_cols(void); | |||||
static void init_cols(void); | |||||
static void unselect_rows(void); | |||||
static void select_row(uint8_t row); | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
// initialize row and col | |||||
unselect_rows(); | |||||
init_cols(); | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = 0; | |||||
matrix_debouncing[i] = 0; | |||||
} | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
select_row(i); | |||||
_delay_us(30); // without this wait read unstable value. | |||||
matrix_row_t cols = read_cols(); | |||||
if (matrix_debouncing[i] != cols) { | |||||
matrix_debouncing[i] = cols; | |||||
if (debouncing) { | |||||
debug("bounce!: "); debug_hex(debouncing); debug("\n"); | |||||
} | |||||
debouncing = DEBOUNCE; | |||||
} | |||||
unselect_rows(); | |||||
} | |||||
if (debouncing) { | |||||
if (--debouncing) { | |||||
_delay_ms(1); | |||||
} else { | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = matrix_debouncing[i]; | |||||
} | |||||
} | |||||
} | |||||
return 1; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||||
} | |||||
inline | |||||
matrix_row_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 0123456789ABCDEF\n"); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
phex(row); print(": "); | |||||
pbin_reverse16(matrix_get_row(row)); | |||||
print("\n"); | |||||
} | |||||
} | |||||
/* Column pin configuration | |||||
* col: 0 1 2 3 4 5 6 7 | |||||
* pin: B0 B1 B2 B3 B4 B5 B6 B7 | |||||
*/ | |||||
static void init_cols(void) | |||||
{ | |||||
// Input with pull-up(DDR:0, PORT:1) | |||||
DDRB &= ~0b11111111; | |||||
PORTB |= 0b11111111; | |||||
} | |||||
/* Returns status of switches(1:on, 0:off) */ | |||||
static matrix_row_t read_cols(void) | |||||
{ | |||||
// Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1) | |||||
return ~PINB; | |||||
} | |||||
/* Row pin configuration | |||||
* row: 0 1 2 3 4 5 6 7 | |||||
* pin: D0 D1 D2 D3 D4 D5 D6 C2 | |||||
*/ | |||||
static void unselect_rows(void) | |||||
{ | |||||
// Hi-Z(DDR:0, PORT:0) to unselect | |||||
DDRD &= ~0b01111111; | |||||
PORTD &= ~0b01111111; | |||||
DDRC &= ~0b00000100; | |||||
PORTD &= ~0b00000100; | |||||
} | |||||
static void select_row(uint8_t row) | |||||
{ | |||||
// Output low(DDR:1, PORT:0) to select | |||||
switch (row) { | |||||
case 0: | |||||
DDRD |= (1<<0); | |||||
PORTD &= ~(1<<0); | |||||
break; | |||||
case 1: | |||||
DDRD |= (1<<1); | |||||
PORTD &= ~(1<<1); | |||||
break; | |||||
case 2: | |||||
DDRD |= (1<<2); | |||||
PORTD &= ~(1<<2); | |||||
break; | |||||
case 3: | |||||
DDRD |= (1<<3); | |||||
PORTD &= ~(1<<3); | |||||
break; | |||||
case 4: | |||||
DDRD |= (1<<4); | |||||
PORTD &= ~(1<<4); | |||||
break; | |||||
case 5: | |||||
DDRD |= (1<<5); | |||||
PORTD &= ~(1<<5); | |||||
break; | |||||
case 6: | |||||
DDRD |= (1<<6); | |||||
PORTD &= ~(1<<6); | |||||
break; | |||||
case 7: | |||||
DDRC |= (1<<2); | |||||
PORTC &= ~(1<<2); | |||||
break; | |||||
} | |||||
} |