* Add Puck * Update Manufacturer name in metadata * Add num lock to high layer * update pins * update pin settings * fix numlock key * Cleanup config.h * Update device info * updates after reviewpull/4501/head
@ -0,0 +1,31 @@ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6060 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER OkKeebs LLC | |||||
#define PRODUCT Puck | |||||
#define DESCRIPTION 4x3 macropad | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 4 | |||||
#define MATRIX_COLS 3 | |||||
#define MATRIX_ROW_PINS { D2, D3, C6, C7 } | |||||
#define MATRIX_COL_PINS { B4, D7, D6 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION ROW2COL | |||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* number of backlight levels */ | |||||
#define BACKLIGHT_LEVELS 3 | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE |
@ -0,0 +1,64 @@ | |||||
#include QMK_KEYBOARD_H | |||||
#define _BL 0 | |||||
#define _HL 1 | |||||
#define _LL 2 | |||||
enum keycodes { | |||||
LOW, | |||||
HIGH | |||||
}; | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* | |||||
* Base Layer (Numbers) | |||||
*/ | |||||
[_BL] = LAYOUT( | |||||
KC_KP_7, KC_KP_8, KC_KP_9, | |||||
KC_KP_4, KC_KP_5, KC_KP_6, | |||||
KC_KP_1, KC_KP_2, KC_KP_3, | |||||
LOW, KC_KP_0, HIGH | |||||
), | |||||
/* | |||||
* High Layer (Work) | |||||
*/ | |||||
[_HL] = LAYOUT( | |||||
KC_NUMLOCK, KC_PAST, KC_NO, | |||||
KC_PMNS, KC_PENT, KC_PPLS, | |||||
KC_NO, KC_PSLS, KC_NO, | |||||
KC_NO, KC_PDOT, KC_NO | |||||
), | |||||
/* | |||||
* Low Layer (Media) | |||||
*/ | |||||
[_LL] = LAYOUT( | |||||
KC_NO, KC_VOLU, KC_NO, | |||||
KC_MPRV, KC_MPLY, KC_MNXT, | |||||
KC_NO, KC_VOLD, KC_NO, | |||||
KC_NO, KC_NO, KC_NO | |||||
), | |||||
}; | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch(keycode) { | |||||
case HIGH: | |||||
if (record->event.pressed) { | |||||
layer_on(_HL); | |||||
}else{ | |||||
layer_off(_HL); | |||||
layer_off(_LL); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOW: | |||||
if (record->event.pressed) { | |||||
layer_on(_LL); | |||||
}else{ | |||||
layer_off(_LL); | |||||
layer_off(_HL); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1 @@ | |||||
#include "puck.h" |
@ -0,0 +1,15 @@ | |||||
#ifndef PUCK_H | |||||
#define PUCK_H | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B \ | |||||
) { \ | |||||
{ K00, K01, K02 }, \ | |||||
{ K03, K04, K05 }, \ | |||||
{ K06, K07, K08 }, \ | |||||
{ K09, K0A, K0B }, \ | |||||
} | |||||
#endif |
@ -0,0 +1,11 @@ | |||||
A 4 x 3 macropad. | |||||
Keyboard Maintainer: [john-pettigrew](https://github.com/john-pettigrew) | |||||
Hardware Supported: Puck PCB. | |||||
Hardware Availability: [OkKeebs.com](https://okkeebs.com/products/puck-pcb) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make puck:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,68 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
BOOTLOADER = halfkay | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
MIDI_ENABLE = no # MIDI controls | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend |