@ -1,5 +1,4 @@ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#undef MANUFACTURER | |||
#define MANUFACTURER Some Guy | |||
#define MANUFACTURER "Some Guy" |
@ -1,48 +1,5 @@ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x2260 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER KBDFans | |||
#define PRODUCT DZ60 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } | |||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_PIN B6 | |||
#define BACKLIGHT_LEVELS 5 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
#define RGB_DI_PIN E2 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 16 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#pragma once | |||
/* sets 'Auto Shift' timeouts */ | |||
#define AUTO_SHIFT_TIMEOUT 150 | |||
#define NO_AUTO_SHIFT_SPECIAL | |||
#endif |
@ -1,87 +1,3 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H_ADMSTROK | |||
#define CONFIG_H_ADMSTROK | |||
#include "config_common.h" | |||
#include "../../config.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0003 | |||
#define MANUFACTURER SATAN | |||
#define PRODUCT GH60 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
// ROWS: Top to bottom, COLS: Left to right | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } | |||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } | |||
#define BACKLIGHT_PIN B6 | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* Backlight configuration */ | |||
#define BACKLIGHT_LEVELS 4 | |||
/* Underlight configuration */ | |||
#define RGB_DI_PIN E2 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 8 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
#pragma once | |||
#define DISABLE_SPACE_CADET_ROLLOVER | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -1,57 +1,8 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H_BEN | |||
#define CONFIG_H_BEN | |||
#include "config_common.h" | |||
#include "../../config.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0003 | |||
#define MANUFACTURER SATAN | |||
#define PRODUCT GH60 | |||
#pragma once | |||
/*MOUSE CONFIG OPTIONS */ | |||
#define MOUSEKEY_INTERVAL 20 | |||
#define MOUSEKEY_DELAY 0 | |||
#define MOUSEKEY_TIME_TO_MAX 45 | |||
#define MOUSEKEY_MAX_SPEED 3 | |||
#define MOUSEKEY_WHEEL_DELAY 0 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -1,4 +1,4 @@ | |||
#pragma once | |||
#undef PRODUCT | |||
#define PRODUCT MadHatter\x27s Custom Spacc | |||
#define PRODUCT "MadHatter's Custom Spacc" |
@ -1,18 +1,10 @@ | |||
#ifndef CONFIG_CINAECO_H | |||
#define CONFIG_CINAECO_H | |||
#include "../../config.h" | |||
#pragma once | |||
#undef MANUFACTURER | |||
#undef PRODUCT | |||
#define MANUFACTURER QMK | |||
#define PRODUCT HHKB QMK cinaeco | |||
#define MANUFACTURER "QMK" | |||
#define PRODUCT "HHKB QMK cinaeco" | |||
// Increase "Tap" detection window. Avoid missing 'q' or 'z' when typing slowly. | |||
#undef TAPPING_TERM | |||
#define TAPPING_TERM 230 | |||
// Uncomment to enable NKRO by default. May cause issues with KVM switches. | |||
//#define FORCE_NKRO | |||
#endif |
@ -1,71 +1,3 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0xCAFE | |||
#define DEVICE_VER 0x0104 | |||
#define MANUFACTURER q.m.k | |||
#define PRODUCT HHKB mod | |||
/* key matrix size */ | |||
#ifdef HHKB_JP | |||
# define MATRIX_ROWS 16 | |||
#else | |||
# define MATRIX_ROWS 8 | |||
#endif | |||
#define MATRIX_COLS 8 | |||
#define TAPPING_TERM 200 | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 3 | |||
#pragma once | |||
#define USB_MAX_POWER_CONSUMPTION 50 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
//#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
//#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -1,85 +1,7 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6061 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Ortholinear Keyboards | |||
#define PRODUCT The Preonic Keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 12 | |||
/* Planck PCB default pin-out */ | |||
#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 } | |||
#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } | |||
#define BACKLIGHT_PIN B7 | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
#pragma once | |||
#define BACKLIGHT_BREATHING // LED breathing | |||
/* number of backlight levels */ | |||
#undef BACKLIGHT_LEVELS | |||
#define BACKLIGHT_LEVELS 5 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
//#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
//#define LOCKING_RESYNC_ENABLE | |||
/* ws2812 RGB LED */ | |||
//#define RGB_DI_PIN D1 | |||
//#define RGBLED_NUM 28 // Number of LEDs | |||
//#define RGBLIGHT_HUE_STEP 10 | |||
//#define RGBLIGHT_SAT_STEP 17 | |||
//#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
//#define DYNAMIC_MACRO_ENABLE // Enable if you need to use the macro functionality | |||
//#define SPACE_CADET // Parenthesis on L/R shift | |||
#endif |
@ -1,4 +1,4 @@ | |||
#pragma once | |||
#undef PRODUCT | |||
#define PRODUCT MadHatter\x27s Custom Singa V3 | |||
#define PRODUCT "MadHatter's Custom Singa V3" |