@ -0,0 +1,26 @@ | |||
// Copyright 2023 customMK | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
// FRAM configuration | |||
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B7 | |||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 4 // 48MHz / 4 = 12MHz; max supported by MB85R64 is 20MHz | |||
// SPI configuration | |||
#define SPI_DRIVER SPID1 | |||
#define SPI_SCK_PIN B3 | |||
#define SPI_SCK_PAL_MODE 5 | |||
#define SPI_MOSI_PIN B5 | |||
#define SPI_MOSI_PAL_MODE 5 | |||
#define SPI_MISO_PIN B4 | |||
#define SPI_MISO_PAL_MODE 5 | |||
#define TAP_CODE_DELAY 10 | |||
// Audio configuration | |||
#define AUDIO_PIN B8 | |||
#define AUDIO_PWM_DRIVER PWMD4 | |||
#define AUDIO_PWM_CHANNEL 3 | |||
#define AUDIO_PWM_PAL_MODE 2 | |||
#define AUDIO_STATE_TIMER GPTD5 |
@ -0,0 +1,30 @@ | |||
/* Copyright 2023 customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#define HAL_USE_PWM TRUE | |||
#define HAL_USE_SPI TRUE | |||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
#define SERIAL_BUFFERS_SIZE 256 | |||
// This enables interrupt-driven mode | |||
#define SPI_USE_WAIT TRUE | |||
#include_next <halconf.h> |
@ -0,0 +1,83 @@ | |||
{ | |||
"manufacturer": "customMK", | |||
"keyboard_name": "ErgoStrafer", | |||
"maintainer": "customMK", | |||
"bootloader": "stm32-dfu", | |||
"diode_direction": "ROW2COL", | |||
"features": { | |||
"bootmagic": true, | |||
"command": false, | |||
"console": false, | |||
"extrakey": true, | |||
"mousekey": true, | |||
"nkro": true, | |||
"encoder": true, | |||
"audio": true | |||
}, | |||
"matrix_pins": { | |||
"cols": ["B0", "A1", "A2", "A3", "A6", "B6", "B10"], | |||
"rows": ["C13", "C14", "C15", "B1", "A7", "A5"] | |||
}, | |||
"processor": "STM32F411", | |||
"url": "https://shop.custommk.com/collections/ergostrafer/products/ergostrafer", | |||
"usb": { | |||
"device_version": "1.0.0", | |||
"pid": "0xFAB8", | |||
"vid": "0xF35B" | |||
}, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ "matrix": [0, 0], "label":"F9", "x":7.5, "y":0 }, | |||
{ "matrix": [0, 1], "label":"7", "x":1.5, "y":1.25 }, | |||
{ "matrix": [0, 2], "label":"8", "x":2.5, "y":1.25 }, | |||
{ "matrix": [0, 3], "label":"9", "x":3.5, "y":1.25 }, | |||
{ "matrix": [0, 4], "label":"0", "x":4.5, "y":1.25 }, | |||
{ "matrix": [0, 5], "label":"-", "x":5.5, "y":1.25 }, | |||
{ "matrix": [0, 6], "label":"T", "x":7.25, "y":3.25, "w":1.5 }, | |||
{ "matrix": [1, 0], "label":"PrtScr", "x":7.5, "y":1 }, | |||
{ "matrix": [1, 1], "label":"1", "x":1, "y":2.25 }, | |||
{ "matrix": [1, 2], "label":"2", "x":2, "y":2.25 }, | |||
{ "matrix": [1, 3], "label":"3", "x":3, "y":2.25 }, | |||
{ "matrix": [1, 4], "label":"5", "x":5, "y":2.25 }, | |||
{ "matrix": [1, 5], "label":"6", "x":6, "y":2.25 }, | |||
{ "matrix": [1, 6], "label":"G", "x":7.25, "y":4.25, "w":1.5 }, | |||
{ "matrix": [2, 0], "label":"F5", "x":7.5, "y":2 }, | |||
{ "matrix": [2, 1], "label":"Tab", "x":1, "y":3.5 }, | |||
{ "matrix": [2, 2], "label":"Q", "x":2.5, "y":3.4 }, | |||
{ "matrix": [2, 3], "label":"4", "x":4, "y":2.25 }, | |||
{ "matrix": [2, 4], "label":"E", "x":4.5, "y":3.4 }, | |||
{ "matrix": [2, 5], "label":"R", "x":6, "y":3.3 }, | |||
{ "matrix": [2, 6], "label":"B", "x":6.5, "y":5.75, "w":1.5 }, | |||
{ "matrix": [3, 0], "label":"Caps Lock", "x":0, "y":3.5 }, | |||
{ "matrix": [3, 1], "label":"L Alt", "x":0.25, "y":4.75, "w":1.5 }, | |||
{ "matrix": [3, 2], "label":"A", "x":2.5, "y":4.5 }, | |||
{ "matrix": [3, 3], "label":"W", "x":3.5, "y":3.4 }, | |||
{ "matrix": [3, 4], "label":"D", "x":4.5, "y":4.5 }, | |||
{ "matrix": [3, 5], "label":"F", "x":6, "y":4.3 }, | |||
{ "matrix": [3, 6], "label":"P", "x":8, "y":5.75 }, | |||
{ "matrix": [4, 1], "label":"L Shift", "x":0.25, "y":5.75, "w":1.5 }, | |||
{ "matrix": [4, 2], "label":"Z", "x":2.5, "y":5.6 }, | |||
{ "matrix": [4, 3], "label":"S", "x":3.5, "y":4.5 }, | |||
{ "matrix": [4, 5], "label":"V", "x":5, "y":5.75, "w":1.5 }, | |||
{ "matrix": [4, 6], "label":"Space", "x":6.5, "y":6.85, "w":1.75 } | |||
{ "matrix": [5, 1], "label":"L Ctrl Duck", "x":0.25, "y":6.75, "w":1.5 }, | |||
{ "matrix": [5, 3], "label":"X", "x":3.5, "y":5.6 }, | |||
{ "matrix": [5, 5], "label":"C", "x":4.75, "y":6.85, "w":1.75 }, | |||
{ "matrix": [5, 6], "label":"L Ctrl", "x":9.5, "y":5.75 } | |||
] | |||
} | |||
}, | |||
"encoder": { | |||
"rotary": [ | |||
{ "pin_a": "A8", "pin_b": "A4"}, | |||
{ "pin_a": "B12", "pin_b": "B14"}, | |||
{ "pin_a": "B15", "pin_b": "A15"} | |||
] | |||
} | |||
} |
@ -0,0 +1,21 @@ | |||
// Copyright 2023 customMK | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_F9, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_T, | |||
KC_PSCR, KC_1, KC_2, KC_3, KC_5, KC_6, KC_G, | |||
KC_F5, KC_TAB, KC_Q, KC_4, KC_E, KC_R, KC_B, | |||
KC_CAPS, KC_LALT, KC_A, KC_W, KC_D, KC_F, KC_P, | |||
KC_LSFT, KC_Z, KC_S, KC_V, KC_SPC, | |||
KC_LCTL, KC_X, KC_C, KC_LCTL | |||
) | |||
}; | |||
#if defined(ENCODER_MAP_ENABLE) | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) } | |||
}; | |||
#endif |
@ -0,0 +1 @@ | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,13 @@ | |||
// Copyright 2023 customMK | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
// With 8k FRAM, max out dynamic keymap layers and macros | |||
// 7x6 matrix (84 bytes) and three encoders (12 bytes) consume 96 bytes per layer | |||
// 32 layers consumes 3072 bytes | |||
#define DYNAMIC_KEYMAP_LAYER_COUNT 32 | |||
// Most of the remaining space can be used for macros | |||
// QMK Macro keycode range allows up to 128 macros | |||
#define DYNAMIC_KEYMAP_MACRO_COUNT 128 |
@ -0,0 +1,21 @@ | |||
// Copyright 2023 customMK | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_F9, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_T, | |||
KC_PSCR, KC_1, KC_2, KC_3, KC_5, KC_6, KC_G, | |||
KC_F5, KC_TAB, KC_Q, KC_4, KC_E, KC_R, KC_B, | |||
KC_CAPS, KC_LALT, KC_A, KC_W, KC_D, KC_F, KC_P, | |||
KC_LSFT, KC_Z, KC_S, KC_V, KC_SPC, | |||
KC_LCTL, KC_X, KC_C, KC_LCTL | |||
) | |||
}; | |||
//#if defined(ENCODER_MAP_ENABLE) | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) } | |||
}; | |||
//#endif |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,27 @@ | |||
/* Copyright 2023 customMK | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include_next <mcuconf.h> | |||
// Used for audio | |||
#undef STM32_PWM_USE_TIM4 | |||
#define STM32_PWM_USE_TIM4 TRUE | |||
// Used for FRAM | |||
#undef STM32_SPI_USE_SPI1 | |||
#define STM32_SPI_USE_SPI1 TRUE |
@ -0,0 +1,27 @@ | |||
# ergostrafer | |||
![ergostrafer](https://i.imgur.com/ncJgD3jh.jpeg) | |||
ErgoStrafer is a gaming mechanical keyboard that reproduces the layout of the discontinued SteelSeries Merc Stealth a.k.a. Zboard. | |||
* Keyboard Maintainer: [customMK](https://github.com/customMK) | |||
* Hardware Supported: ErgoStrafer | |||
* Hardware Availability: [customMK](https://shop.custommk.com/collections/ergostrafer/products/ergostrafer) | |||
Make example for this keyboard (after setting up your build environment): | |||
make custommk/ergostrafer:default | |||
Flashing example for this keyboard: | |||
make custommk/ergostrafer:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader | |||
Enter the bootloader in 3 ways: | |||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the "Load" key in the top right corner) and plug in the keyboard | |||
* **Physical reset button**: Briefly press the button on the back of the PCB | |||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |
@ -0,0 +1,3 @@ | |||
EEPROM_DRIVER = spi | |||
AUDIO_DRIVER = pwm_hardware |