Browse Source
Added Daisy port (#2016)
* Add files via upload * Update readme.md * Update readme.md * Update readme.md * Add files via upload * Delete config.h * Delete rules.mk * Add files via upload * Update config.h * revised config files * revised readme * Update readme.md * Update readme.mdpull/2038/merge
Max
6 years ago
committed by
Jack Humbert
Jack Humbert
7 changed files with 408 additions and 0 deletions
Split View
Diff Options
-
+175 -0keyboards/daisy/config.h
-
+15 -0keyboards/daisy/daisy.c
-
+19 -0keyboards/daisy/daisy.h
-
+99 -0keyboards/daisy/keymaps/default/keymap.c
-
+5 -0keyboards/daisy/keymaps/default/readme.md
-
+29 -0keyboards/daisy/readme.md
-
+66 -0keyboards/daisy/rules.mk
+ 175
- 0
keyboards/daisy/config.h
View File
| @ -0,0 +1,175 @@ | |||
| #ifndef CONFIG_H | |||
| #define CONFIG_H | |||
| #include "config_common.h" | |||
| /* USB Device descriptor parameter */ | |||
| #define VENDOR_ID 0x1209 | |||
| #define PRODUCT_ID 0x2328 | |||
| #define DEVICE_VER 0x501 | |||
| #define MANUFACTURER K.T.E.C. | |||
| #define PRODUCT Daisy | |||
| #define DESCRIPTION qmk port for Daisy | |||
| /* key matrix size */ | |||
| #define MATRIX_ROWS 4 | |||
| #define MATRIX_COLS 11 | |||
| /* | |||
| * Keyboard Matrix Assignments | |||
| * | |||
| * Change this to how you wired your keyboard | |||
| * COLS: AVR pins used for columns, left to right | |||
| * ROWS: AVR pins used for rows, top to bottom | |||
| * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
| * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
| * | |||
| */ | |||
| #define MATRIX_ROW_PINS { D2, D3, D5, B7 } | |||
| #define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 } | |||
| #define UNUSED_PINS | |||
| /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
| #define DIODE_DIRECTION COL2ROW | |||
| #define BACKLIGHT_PIN D0 | |||
| #define BACKLIGHT_LEVELS 6 | |||
| /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
| #define DEBOUNCING_DELAY 5 | |||
| /* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
| //#define MATRIX_HAS_GHOST | |||
| /* number of backlight levels */ | |||
| /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
| #define LOCKING_SUPPORT_ENABLE | |||
| /* Locking resynchronize hack */ | |||
| #define LOCKING_RESYNC_ENABLE | |||
| /* | |||
| * Force NKRO | |||
| * | |||
| * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
| * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
| * makefile for this to work.) | |||
| * | |||
| * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
| * until the next keyboard reset. | |||
| * | |||
| * NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
| * fully operational during normal computer usage. | |||
| * | |||
| * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
| * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
| * bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
| * power-up. | |||
| * | |||
| */ | |||
| //#define FORCE_NKRO | |||
| /* | |||
| * Magic Key Options | |||
| * | |||
| * Magic keys are hotkey commands that allow control over firmware functions of | |||
| * the keyboard. They are best used in combination with the HID Listen program, | |||
| * found here: https://www.pjrc.com/teensy/hid_listen.html | |||
| * | |||
| * The options below allow the magic key functionality to be changed. This is | |||
| * useful if your keyboard/keypad is missing keys and you want magic key support. | |||
| * | |||
| */ | |||
| /* key combination for magic key command */ | |||
| #define IS_COMMAND() ( \ | |||
| keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
| ) | |||
| /* control how magic key switches layers */ | |||
| //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
| //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
| //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
| /* override magic key keymap */ | |||
| //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
| //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
| //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
| //#define MAGIC_KEY_HELP1 H | |||
| //#define MAGIC_KEY_HELP2 SLASH | |||
| //#define MAGIC_KEY_DEBUG D | |||
| //#define MAGIC_KEY_DEBUG_MATRIX X | |||
| //#define MAGIC_KEY_DEBUG_KBD K | |||
| //#define MAGIC_KEY_DEBUG_MOUSE M | |||
| //#define MAGIC_KEY_VERSION V | |||
| //#define MAGIC_KEY_STATUS S | |||
| //#define MAGIC_KEY_CONSOLE C | |||
| //#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
| //#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
| //#define MAGIC_KEY_LAYER0 0 | |||
| //#define MAGIC_KEY_LAYER1 1 | |||
| //#define MAGIC_KEY_LAYER2 2 | |||
| //#define MAGIC_KEY_LAYER3 3 | |||
| //#define MAGIC_KEY_LAYER4 4 | |||
| //#define MAGIC_KEY_LAYER5 5 | |||
| //#define MAGIC_KEY_LAYER6 6 | |||
| //#define MAGIC_KEY_LAYER7 7 | |||
| //#define MAGIC_KEY_LAYER8 8 | |||
| //#define MAGIC_KEY_LAYER9 9 | |||
| //#define MAGIC_KEY_BOOTLOADER PAUSE | |||
| //#define MAGIC_KEY_LOCK CAPS | |||
| //#define MAGIC_KEY_EEPROM E | |||
| //#define MAGIC_KEY_NKRO N | |||
| //#define MAGIC_KEY_SLEEP_LED Z | |||
| /* | |||
| * Feature disable options | |||
| * These options are also useful to firmware size reduction. | |||
| */ | |||
| /* disable debug print */ | |||
| //#define NO_DEBUG | |||
| /* disable print */ | |||
| //#define NO_PRINT | |||
| /* disable action features */ | |||
| //#define NO_ACTION_LAYER | |||
| //#define NO_ACTION_TAPPING | |||
| //#define NO_ACTION_ONESHOT | |||
| //#define NO_ACTION_MACRO | |||
| //#define NO_ACTION_FUNCTION | |||
| // ws2812 options | |||
| #define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to | |||
| #define RGBLIGHT_ANIMATIONS // run RGB animations | |||
| #define RGBLED_NUM 8 // number of LEDs | |||
| #define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue | |||
| #define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation | |||
| #define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) | |||
| /* | |||
| * MIDI options | |||
| */ | |||
| /* Prevent use of disabled MIDI features in the keymap */ | |||
| //#define MIDI_ENABLE_STRICT 1 | |||
| /* enable basic MIDI features: | |||
| - MIDI notes can be sent when in Music mode is on | |||
| */ | |||
| //#define MIDI_BASIC | |||
| /* enable advanced MIDI features: | |||
| - MIDI notes can be added to the keymap | |||
| - Octave shift and transpose | |||
| - Virtual sustain, portamento, and modulation wheel | |||
| - etc. | |||
| */ | |||
| //#define MIDI_ADVANCED | |||
| /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
| //#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
| #endif | |||
+ 15
- 0
keyboards/daisy/daisy.c
View File
| @ -0,0 +1,15 @@ | |||
| #include "daisy.h" | |||
| void led_set_kb(uint8_t usb_led) { | |||
| // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
| if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
| // output low | |||
| DDRC |= (1<<PC6); | |||
| PORTC &= ~(1<<PC6); | |||
| } else { | |||
| // Hi-Z | |||
| DDRC &= ~(1<<PC6); | |||
| PORTC &= ~(1<<PC6); | |||
| } | |||
| led_set_user(usb_led); | |||
| } | |||
+ 19
- 0
keyboards/daisy/daisy.h
View File
| @ -0,0 +1,19 @@ | |||
| #ifndef DAISY_H | |||
| #define DAISY_H | |||
| #include "quantum.h" | |||
| #define KEYMAP( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \ | |||
| K30, K31, K32, K34, K35, K37, K38, K39 \ | |||
| ) \ | |||
| { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \ | |||
| { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A } \ | |||
| } | |||
| #endif | |||
+ 99
- 0
keyboards/daisy/keymaps/default/keymap.c
View File
| @ -0,0 +1,99 @@ | |||
| #include "daisy.h" | |||
| #include "action_layer.h" | |||
| extern keymap_config_t keymap_config; | |||
| // Layer shorthand | |||
| #define _BL 0 | |||
| #define _LW 1 | |||
| #define _RS 2 | |||
| enum layer_keycodes { | |||
| QWERTY = SAFE_RANGE, LOWER, RAISE | |||
| }; | |||
| const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
| /* Base Layer | |||
| * .-----------------------------------------------------------------------. | |||
| * | ESC | Q | W | E | R | T | Y | U | I | O | P | \| | | |||
| * |-----------------------------------------------------------------------| | |||
| * | TAB | A | S | D | F | G | H | J | K | L | ENTER | | |||
| * |-----------------------------------------------------------------------| | |||
| * | LSHIFT | Z | X | C | V | B | N | M | ,< | .> | /? | | |||
| * |-----------------------------------------------------------------------| | |||
| * | LCTRL | LGUI | LALT | SPACE | BACKSPACE | LW | RS | RALT | | |||
| * '-----------------------------------------------------------------------' | |||
| */ | |||
| [_BL] = KEYMAP( | |||
| GRAVE_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, | |||
| KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, | |||
| KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, | |||
| KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT ), | |||
| /* Function Layer | |||
| * .-----------------------------------------------------------------------. | |||
| * | GRV | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | -_ | | |||
| * |-----------------------------------------------------------------------| | |||
| * | | =+ | UP | | | | [{ | ]} | ;: | '" | | | |||
| * |-----------------------------------------------------------------------| | |||
| * | | LEFT| DOWN |RIGHT| | | | | | | | | |||
| * |-----------------------------------------------------------------------| | |||
| * | | | | | DELETE | | | | | |||
| * '-----------------------------------------------------------------------' | |||
| */ | |||
| [_LW] = KEYMAP( | |||
| KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, | |||
| KC_TRNS, KC_EQL, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS, | |||
| KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS ), | |||
| /* Second Function Layer | |||
| * .-----------------------------------------------------------------------. | |||
| * | RST | F1 | F2 | F3 | F4 | F5 | F6 | | HOME| PGUP| | | | |||
| * |-----------------------------------------------------------------------| | |||
| * | | F7 | F8 | F9 | F10 | F11 | F12 | | END | PGDN| | | |||
| * |-----------------------------------------------------------------------| | |||
| * | |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL| | | |||
| * |-----------------------------------------------------------------------| | |||
| * | | | | | | | | | | |||
| * '-----------------------------------------------------------------------' | |||
| */ | |||
| [_RS] = KEYMAP( | |||
| RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, | |||
| KC_TRNS, RGB_TOG, RGB_SMOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), | |||
| }; | |||
| const uint16_t PROGMEM fn_actions[] = { | |||
| }; | |||
| bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
| switch (keycode) { | |||
| case LOWER: | |||
| if(record->event.pressed){ | |||
| layer_on(_LW); | |||
| } else { | |||
| layer_off(_LW); | |||
| } | |||
| return false; | |||
| break; | |||
| case RAISE: | |||
| if(record->event.pressed){ | |||
| layer_on(_RS); | |||
| } else { | |||
| layer_off(_RS); | |||
| } | |||
| return false; | |||
| break; | |||
| } | |||
| return true; | |||
| }; | |||
+ 5
- 0
keyboards/daisy/keymaps/default/readme.md
View File
| @ -0,0 +1,5 @@ | |||
|  | |||
| # Default Daisy Layout | |||
| This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me. | |||
+ 29
- 0
keyboards/daisy/readme.md
View File
| @ -0,0 +1,29 @@ | |||
| # Daisy | |||
| A 40% keyboard kit sold by KPRepublic. | |||
| Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot) | |||
| Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2 | |||
| Hardware Availability: http://tinyurl.com/yc26lq22 | |||
| Make example for this keyboard (after setting up your build environment): | |||
| make daisy:default | |||
| See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||
| # Other Keymaps | |||
| The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable. | |||
| A printable picture showing this layout is available here: https://imgur.com/9mSF0yf | |||
| ``` | |||
| $ make daisy:[default|<name>] | |||
| ``` | |||
| # Bootloader | |||
| I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex | |||
+ 66
- 0
keyboards/daisy/rules.mk
View File
| @ -0,0 +1,66 @@ | |||
| # MCU name | |||
| #MCU = at90usb1286 | |||
| MCU = atmega32u4 | |||
| # Processor frequency. | |||
| # This will define a symbol, F_CPU, in all source code files equal to the | |||
| # processor frequency in Hz. You can then use this symbol in your source code to | |||
| # calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
| # automatically to create a 32-bit value in your source code. | |||
| # | |||
| # This will be an integer division of F_USB below, as it is sourced by | |||
| # F_USB after it has run through any CPU prescalers. Note that this value | |||
| # does not *change* the processor frequency - it should merely be updated to | |||
| # reflect the processor speed set externally so that the code can use accurate | |||
| # software delays. | |||
| F_CPU = 16000000 | |||
| # | |||
| # LUFA specific | |||
| # | |||
| # Target architecture (see library "Board Types" documentation). | |||
| ARCH = AVR8 | |||
| # Input clock frequency. | |||
| # This will define a symbol, F_USB, in all source code files equal to the | |||
| # input clock frequency (before any prescaling is performed) in Hz. This value may | |||
| # differ from F_CPU if prescaling is used on the latter, and is required as the | |||
| # raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
| # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
| # at the end, this will be done automatically to create a 32-bit value in your | |||
| # source code. | |||
| # | |||
| # If no clock division is performed on the input clock inside the AVR (via the | |||
| # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
| F_USB = $(F_CPU) | |||
| # Interrupt driven control endpoint task(+60) | |||
| OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
| # Boot Section Size in *bytes* | |||
| # Teensy halfKay 512 | |||
| # Teensy++ halfKay 1024 | |||
| # Atmel DFU loader 4096 | |||
| # LUFA bootloader 4096 | |||
| # USBaspLoader 2048 | |||
| OPT_DEFS += -DBOOTLOADER_SIZE=4996 | |||
| # QMK Build Options | |||
| # change to "no" to disable the options, or define them in the Makefile in | |||
| # the appropriate keymap folder that will get included automatically | |||
| # | |||
| BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
| MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
| EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
| CONSOLE_ENABLE = no # Console for debug(+400) | |||
| COMMAND_ENABLE = no # Commands for debug and configuration | |||
| NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
| BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
| MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
| AUDIO_ENABLE = no # Audio output on port C6 | |||
| UNICODE_ENABLE = no # Unicode | |||
| BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
| RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
| SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||